Used High Speed Edm for sale (46,001)

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm Psdpovut Rtefx Agzjha table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Phsdpfsu Icwgox Agzea Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock Psdpfx Asxwwc Ujgzjha - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Phodpexpfhvjfx Agzja Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe Podpfx Agjw Hxiwszoha BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: excellent (used), Converging Solutions converging conveyor Model: High Speed Variable speed control Serial number: 5054 Year of construction: 2002 240 V, 1 Ph, 50 Hz, 16 A Phodpfxev Tz Tmj Agzea Belt width: 625 mm and (3x) 135 mm Total dimensions: 1460 mm x 1000 mm x 1140 mm.

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW Phjdpfsvut Rgjx Agzea weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Year of construction: 2024, condition: new, 350 is a high speed slitting machine with excellent design structure. The max. slitting speed can reach to 300m/min with stable running. It adopts full servo motor system and PLC to control the machine tension, which guarantee machine run stable when high speed slitting. This automatic slitting machine is mainly suitable for slitting label rolls and adhesive labels, and it also could slit general paper and film rolls. Features: 1. full servo motor driving system for tension control. 2. Italy ST web guide system guarantees the high precision of web when high speed running. 3. Moveable eccentric knife roller design makes operator adjust knife conveniently. 4. Special rewinding structure, upper shaft adopts turret rewinder structure. 5. PLC and touch screen control. 6. Unwinding shaft could lift up and down, which can load heavy web roll. Specifications: Max. web width - 350 mm Max. unwinding diameter - 800 mm Min. slitting width - 20 mm Slitting speed - ≤300 m/min Precision of slitting - ±0.10 mm Max. rewinding diameter - 500 mm Power supply - 380V/3ph Main motor power - 1,8 kw Weight - 1780 kg Pjdsg I H Naepfx Agzeha Overall dimension - 1200 x 2400 x 1650 mm

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm Phjdpfx Agsxiy A Uozea z-travel 400 mm Control INGERSOLL ANDRONIC

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Phodpexpfglsfx Agzoa Documentation

Condition: used, Year of construction: 2019, High-speed milling machine OPS Ingersoll HighSpeed EAGLE V9, year 2019, featuring excellent equipment and an extensive range of accessories for sale. - Dynamic 5-axis high-speed milling machine with Heidenhain TNC 640, HSK50 spindle (Step-Tec) with up to 36,000 rpm Phsdpfjxu U Uvsx Agzea - Excellent condition, currently only about 10,000 operating hours - Special features such as wet milling option for graphite electrodes (coolant filtration system) and pre-installation for automation with pallet changer - Extensive accessories including shrink fit machine (HAIMER), screw compressor (Atlas Copco), EROWA pallet UPC 320, T-slot table 520 x 520 mm, LANG clamping systems, shrink fit chucks, tools, workshop equipment, and workbenches (see accessories list)

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Pjdpowwundefx Agzeha Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm Pedpfx Agjvut Ixjzoha column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls Podswu Rrajpfx Agzeha - Roll feed BBV or optionally servo feeder available Stock image. Please contact us for a detailed quotation!

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 Psdeikvcaopfx Agzoha EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Pjdpfx Aexn A Spogzeha Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm Podpfx Aenygvrsgzsha 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Pedpomcw S Sjfx Agzeha Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm Pedpjvut Huofx Agzsha hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available

Condition: used, Year of construction: 2010, x-travel 620 mm Psdpfxoxfwg As Agzeha y-travel 570 mm z-travel 350 mm Control Heidenhain iTNC530

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Spindle diameter: 8mm Table feed: 65mm Table surface: 200x260mm Phjdpfx Aswifgujgzsa Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm Podpfxeu Nm Nis Agzeha - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Pjdjxcyz Ropfx Agzjha Condition: Very good, used but like new Available immediately from stock.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, Machine operating hours 11,400 Total spindle hours 1,600 New white spindle with approx. 120 hours Chiron FZ 12 KS high speed plus / 5 axes Year of manufacture 2009 Control: Siemens 840 D Travel X/Y/Z: 550/400/360 mm 2-axis NC swiveling rotary table A axis +130° / -110° C axis rotary axis 360° 48-position tool magazine Psdpsw Nip Eofx Agzoha HSK 50 interface ICS 40 bar Chip conveyor High-pressure coolant internal / external Spindle speed up to 24,000 rpm Tool measurement: Blum Novotest 3D probe: Renishaw

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Phjdpfxowifd He Agzea Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)