Used High Speed Milling Machine for sale (85,220)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Dwedpfx Aaeyhdvkored Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm Dwedpfx Ajy Ni Ivoarjd H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint Dwodpsx E Tmbsfx Aarod • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 3,750 rpm, Lagun FTV 4 SP turret milling machine, featuring ball screw drives for table movements, a spindle head with variable speeds (50-3750 rpm), automatic tool clamping, a table size of 1370x280 mm, travels of 900 mm in the longitudinal direction, 345 mm in the transverse direction, and 400 mm in the vertical direction. The ram travel is 570 mm, the quill stroke is 100 mm, and it has an ISO 40 taper. The table has automatic and rapid traverse capabilities and is equipped with a Fagor dimension display. The spindle head power is 3 hp. Dodpfsz Rl Dfox Aarowd

Year of construction: 2010, condition: used, CNC control system FIDIA with handwheel; travel ranges: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm; clamping table, length x width x height, 2 pieces, each approx. 2,000 x 2,000 mm; table load max. 1,000 kg; milling spindle, spindle power S1 / S6 approx. 7.4 kW / 12 kW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, feed rate X-, Y-, Z-axis up to 16 m/min, axis acceleration m/s², machine footprint approx. 14,000 x 2,600 x 3,650 mm, with self-built table, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine has already been disassembled and stored. The machine is already located at a different location in Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Dwodpfx Aao Af Nl Uorod

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Dsdpehik Ezsfx Aarswd Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Dwedpezfwm Njfx Aarsd Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 610555, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Travel distance X-axis: 610 mm Travel distance Y-axis: 460 mm Travel distance Z-axis: 510 mm Table length: 950 mm Table width: 560 mm Spindle speed: 60–6,000 rpm Tool interface: BT40 Dwjdpfx Aas Aidvgsrod Spindle power: 7.5 kW MACHINE DETAILS Control: CNC Control system: Fanuc Dimensions & Weight Dimensions (L x W x H): 2,100 x 2,600 x 2,600 mm Net weight: 3,800 kg Number of transport packages: 1 unit

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Dodpjzufi Refx Aarewd Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. Djdpfx Aaj Agn Insrjwd For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function Dwodpfx Aaj Agwvmorjd >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Dwsdpfx Aaj Ahq A Eorjd Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Year of construction: 2007, condition: used, CNC control system HEIDENHAIN iTNC 530 with handwheel, travel distances: X-axis approx. 1,500 mm, Y-axis approx. 2,400 mm, Z-axis approx. 800 mm, table dimensions (length x width x height) approx. 2,500 x 1,500 x 530 mm, maximum table load 500 kg, milling spindle power 4 kW, spindle speed 6,000 rpm, tool holder 78/8 flange, feed rate X, Y, and Z axes 20 m/min, axis acceleration 1.5 m/s², machine footprint 6,000 x 4,000 x 3,900 mm, total weight approx. 8,000 kg, NOTE: Fully functional condition, regular maintenance performed by the machine manufacturer! The machine is already located at a different site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Djdpfx Aj Af Nl Hjarswd

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication Dedpfj Ahzl Dox Aarewd - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Zayer milling machine, model 60BM, with a table of 2030mm x 700mm, featuring a dimension display, and a motorized ram. Longitudinal travel: 1,524 mm, ram travel: 712 mm, vertical travel: 560 mm, ISO 50, speeds: 24-1685 rpm, spindle motor power: 15 hp. The machine has been inspected. Approximate machine weight: 6,500 kg, in good condition. Dsdpjzmp Injfx Aarswd

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 Dodpfjylnpiex Aarswd max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 100–1,300 min⁻¹ WORK TABLE Table dimensions: 520 × 170 mm Dwsdpfx Aj Aduicjared Table slots: 3 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Width: 900 mm Height: 1,400 mm Weight: 500 kg

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power in overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Djdpfx Aezd Rizsarswd Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. Dwedpfxe Ahq Eks Aarjd The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: new, Year of construction: 2026, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2026 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Dwodpfxsxc Tr Aj Aared Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 2,500 rpm, total length: 900 mm, total width: 1,100 mm, spindle mount: MK 3, type of input current: three-phase, Three-phase 400-volt motor is running smoothly! Djds Aiir Ropfx Aarewd The motor can run in both directions (left and right). The spindle speed is adjustable in 12 steps, from 125 to 2500 RPM. Drilling and milling are possible. The spindle has power feed. Three feed rates are adjustable: 0.12 - 0.18 - 0.25 mm/revolution. MT3 spindle with draw-in collet. Maximum drilling depth: 100 mm. The head is height-adjustable. Maximum distance between table and spindle: 750 mm. The cross table is in good condition. Table size: 730 x 210 mm. Coolant pump located in the machine base. Emergency stop switch. Year of manufacture: 2001 Overall dimensions: 90 x 110 x 210 cm. Includes all accessories as shown in the pictures next to the machine. Contact us for shipping options! €2,000.00

Condition: excellent (used), Digital display Heidenhain Saddle travel range Saddle travel along X-axis 600 mm Saddle travel along Y-axis 400 mm Saddle travel along Z-axis 400 mm Clamping surfaces Vertical table 500x320 mm Permissible workpiece weight max. 500 kg Fixed swivel table 800x400 mm Permissible workpiece weight max. 400 kg Dwedpfx Aae Ahw Hzjrod Feed Feed rate (X and Y) 16-800 mm/min Feed rate (Z) 8-400 mm/min Rapid traverse (X and Y) 2000 mm/min Rapid traverse (Z) 1000 mm/min Horizontal milling spindle Tool holder SK 40 Mechanical speed steps 18 Speed range 63-3150 rpm Swiveling vertical milling head Tool holder SK 40 Quill travel 100 mm Swiveling range ± 90° Speed steps 18 Speed range 63-3150 rpm Machine dimensions Length 2210 mm Width 2155 mm Height 1910 mm Weight approx. 2200 kg

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. Dsdpfo Agn Rxsx Aarjwd For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Dwsdpfx Aas Agbyporjd Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 2007, travel -x axis 800 mm travel -y axis 500 mm travel -z axis 610 mm control HEIDENHAIN - TNC 530 table load 600 kg number of spindle speeds 14.000 U/min numbers of positions in the tool changer 46 tool taper HSK-A63 Milling Machine - Vertical | FEHLMANN - PICOMAX 95 equipped with 46-way tool changer and chip conveyor. Equipment / Scope of Delivery: - swivel rotary table (4th + 5th axis) - touch probe: HEXAGON - tool measurement system: Blum - oil mist separator: Donaldson - high-pressure coolant system with coolant pump: Fehlmann - burn Engineering FD 2500-F11 cooling unit - Knoll 300 K-1 scraper belt conveyor Dwedpo Aa A Rmsfx Aarsd The machine is in a well-maintained condition. A machine video will be shared on request. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX95 | PICOMAX-95