Used Homag Bof for sale (490)

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This HOMAG Optimat KAL210/6/A20/S2 is designed for jointing straight workpiece edges, gluing, and finishing various edging materials up to 20 mm thickness. It features a feed rate of 18 - 25 m/min and accommodates workpiece thickness from 8 to 60 mm. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KAL210/6/A20/S2 machine we have for sale. Contact us for further details. • Spindle motor power: Joint milling unit: 2 motors each 3 kW; End trimming unit: 2 motors each 0.8 kW; Pre-milling unit: 2 motors each 1.5 kW • Spindle speed range: Joint milling unit: 9,000 1/min; End trimming unit: 12,000 1/min; Pre-milling unit: 12,000 1/min • Single-sided machine for jointing straight workpiece edges, glueing and finishing of various edging materials from the roll or as strips, up to 20 mm edge thickness, in longitudinal and transverse pass. • Feed rate: 18 - 25 m/min. • Feed rate with form milling FK11 max. 20 m/min. • Workpiece thickness: 8 - 60 mm • Edge material strip max.: 0.4 - 20 mm • Edge material roll: 0.3 - 3 mm • Joint milling unit with electro-pneumatic control of both motors • Gluing unit A20 - 2 rollers • Quickmelt gluing unit • Temperature control electronic with LED display • Magazine 2 rolls manual • For solid edges, strips and rolls • 1 edge feed Dwodpfx Apezrg Icjwsa • 2 roll holders • Pressure zone C • 1 driven pre-press roll diameter 150 mm • 6 pressing rollers diameter 70 mm • Motors can be swivelled manually for bevel cutting • Shape trimming unit FK11 manual • For machining the edge protrusions on the upper and lower edge of the workpiece and for milling of the workpiece front and rear edge • Finishing unit profile PN10 • For chamfering or rounding pre-milled PVC edges • Finishing unit consisting of finishing unit glue joint and buffing unit • Automation package chamfer / radius KAL210/6/A20 • Automatic adjustment of infeed ruler • Automatic adjustment of pressure zone • Pneumatic adjustment from chamfer to straight cut • Pneumatic adjustment of the trimming motors for flush or projection trimming • Pneumatic adjustment of pre-milling unit for flush or projection milling • Automatic adjustment from chamfer to radius milling for form milling • Pneumatic adjustment PN10 / FA11 • Electronic height adjustment • Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Condition: used, machine/vehicle number: 008698, X axis working area: 4200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Dwjdpfxeztka Ej Apwja Maximum edge height: 65 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL Dodezrd Sfspfx Apwewa No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Dsdpozrd Rzsfx Apwewa Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Dsdpozrd Nqefx Apwjwa Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503 Dodszrd Dhspfx Apwewa

Condition: used, machine/vehicle number: 008519, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Dwjdozruytspfx Apwja Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Djdozdki Ujpfx Apwjwa Powertouch screen Woodwop for machine Energy Saving Mode

Condition: excellent (used), Year of construction: 2023, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer 14 Position Rotating Tool Changer Comfort Package Dwedpfxezgtxqs Apwoa Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Energy Saving Function Powercontrol with powerTouch WoodWop for machine 3D Simulator for Machine 3 Phase 400V 50Hz CE

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 Dodpfxezqggvo Apwswa WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: bordatriceLottoUno HOMAG-PROFI KAL330/7/A3/WZ Dwodpfxowuuf Rj Apwsa Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used 4-axis CNC machining center Manufacturer: Homag Type: BAZ 211 Venture 21L Year of manufacture: 2010 Highlights! - Flex 5+ unit - PowerEdge gluing unit - MPU drilling head - and more Dwedpfxezp Edqj Apwja Console table with 8 manually adjustable consoles, 2 vacuum cups each, side and end stops, LED position indicator for vacuum cups 6 sets of extraction rails, vacuum connection for templates WORKPIECE PARAMETERS: – Workpiece dimensions / work table: 4175*1550 mm – Workpiece thickness: – Max. 300 mm including clamping devices for milling; with standard clamp max. 60 mm; gluing: max. 40 mm – Up to max. 60 mm with standard clamp SAFETY AND PROTECTION DEVICES: CE compliant; SAFETY GUARD ON THE RIGHT WITH DOOR left and rear: wall mounting! Tooling: 18 kW spindle and 18-position tool changer (turret) + 10-position turret changer, C-axis and interface for Flex5+ unit MPU drilling head with 30 spindles (V20/H10/S360°) (integrated swivel axis 0-185°) Flex5+ sawing/drilling/milling unit Power Edge 360° gluing package with pre-trimming station and 1-roll Blowing nozzle for workpiece edge 2* combined edge/radius milling and pull blade unit Tool change station on the right VACUUM PUMP 100/140 m3/h Control: POWERCONTROL PC85 CONTROL PANEL FOR PROGRAM START; WOODWOP Version 6.0 DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the tools and HSK chucks shown in the pictures!

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm including the piping shown, leading to 200mm Easy-Touch control with color display for easy machine operation 10 programs can be stored Units: Top pressure with manual adjustment via crank and SIKO counter Infeed guide with manual adjustment and SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color changes from white to transparent Gluing unit with automatic edge infeed for roll material up to 3 mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual in folder form All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Dwedpfx Apjzn Afpjwoa Original paint, only a few spots have been touched up. Dust extraction hoses replaced. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, machine/vehicle number: 008608, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84 Dedpfjzqz N Sox Apwswa

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: Dwjdpfx Ajztpw Nspwea - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Dsdstywukjpfx Apwjwa Installation and set-up of the unit at your machine is also possible.

Condition: reconditioned (used), functionality: fully functional, Universal Trimming Unit UF11, with frequency inverter Used & reconditioned unit, without warranty For grooving or rebating in edgebanding machines or double end tenoners Dedpfjztl Rxox Apwewa Specification: - motor can be swiveled steplessly or in rasters from +90 to -90 degrees (each vertical position of motor shaft) - motor 4 kW, 3Ph 400 V, 300 Hz - motor shaft diameter 30 mm - with electro-pneumatic jumping function - inclusive of suitable KEB frequency inverter (used & tested) Upon request the unit can be upgraded to motorised (NC-controlled) adjustments in x- or y-axis. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Availability 1 - 2 weeks after receipt of order.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, HOMAG Pre-melting unit for Quick-Melt system Dwsdpfx Ajztl Nbjpwja

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control Dwedeztl Scspfx Apwea - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Dodpfx Aszmmulepwjwa Number of painting guns: 4

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm Dwjdpfx Aoztl N Uepwoa - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Dsdpfxex Ei Syo Apwjwa

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Dodpfeztazfjx Apwswa Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: ready for operation (used), Year of construction: 2015, This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. • Working area: 6,000 x 1,550 mm • Workpiece parameters: • Length (single setup): 6,000 mm • Length (pendulum operation): 1,550–3,200 mm • Width: max. 1,550 mm (with rear stop and milling cutter Ø25 mm) • Workpiece thickness: up to 275 mm including clamping devices; up to 60 mm with standard clamping equipment • Speed Pack: X-axis maximum feed 80 m/min • X-axis speed: 80 m/min • Tooling: Dodpox D Ra Hofx Apwjwa • Tool transfer station on left side of machine bed • Disc-type tool changer: 18 positions • Capacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm tools • Max aggregate length: 320 mm • No tools included • Main milling spindle: • 12 kW (S6) / 9.5 kW (S1) • Frequency-controlled 0–24,000 rpm • C-axis: • With aggregate interface; unlimited swivel range • Interface for FLEX-5 aggregate (aggregate not included) • Drilling head (30 spindles) – V20 / H10 / S360° “MPU”: • C-axis ±185° for drilling/sawing at any angle • 20 vertical high-speed spindles with quick-change • Vertical spindle layout (U-shape): 3 rows with 11, 3, and 6 spindles, 32 mm spacing • 10 horizontal spindles: 4 pairs at 32 mm spacing; 1 pair at 320 mm spacing • Grooving/separation saw: for blade diameters up to Ø200 mm • Table/base: • Grid table with slotted aluminum profile • Dynamic table area allocation (R-table): automatic part size check; vacuum zones permanently assigned to machining fields • Control/software: • POWERCONTROL PC 86 POWERTOUCH • 21.5" Full HD multi-touch display • WoodWop graphical, dialog-based CNC programming • Vacuum: Supplied via customer-side vacuum system (no integrated vacuum pump)

Condition: like new (used), 1 milling unit Dwsdoy Ukzzopfx Apwsa 8 vertical drills 6 side drills 1 saw 12 kW Year of manufacture: 2011