Used Hot Press for sale (15,221)

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper Dcjdpfx Aboyy Hgqo Uof :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, Djdpfx Aboyyqnfe Uscf complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dodpfx Ajvuuikob Uscf Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Year of construction: 2006, functionality: fully functional, Used CNC 4-meter press brake from Ermaksan Model: CNC AP 40200 Capacity: 4100 x 200 tons 1 set of complete tooling Delem DA66w graphical CNC control CNC-controlled Y1, Y2, X, and R axes Manual crowning Dedpfeyw Swiex Ab Ujcf

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Dcedpfxsyym A Ss Ab Uef

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dsdoyx Inaepfx Ab Uscf Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm Dsdpfx Aeyx Impjb Ujcf distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight Dcodpfokvnggsx Ab Usf 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 2007, Nestro Votecs briquetting press Type: HP 540 with hopper and agitator Automatic on/off Control cabinet Year of manufacture: 02/2007 Hydraulic operating pressure: 200 bar Dcedpfx Abjyxwi Hj Ujf Hydraulic unit Filling cylinder Material cylinder Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale Offered without guarantee and without warranty Machine inspection possible by arrangement

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. +++ Attention: Machine is part of an online auction! +++ Dodpjx Ry Ntsfx Ab Uscf

Year of construction: 2021, condition: used, Technical details: Dsdpfx Aboyya Ibo Uocf pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW Servo-mechanical spindle press DESCRIPTION OF THE MACHINE – 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N. The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. On the horizontal arm, there is a movable press table that can be manually shifted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand control system. The control panel includes two-hand control buttons, an emergency stop switch, a table lowering button, and force selector switches 1 and 2. The force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press. It also runs on linear guides. The head is driven by a lead screw powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Dcodpfx Abstph A Nj Uof

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Dcsdpfox Ry Dqjx Ab Usf +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1986, Make: MÜLLER, Model: ZE400-20.24.1, Year of manufacture: 1986, Machine No.: 498601, Max. pressure: 400 t, Clamping area (table): 2,000 x 1,300 mm, Clamping area (ram): 2,000 x 1,300 mm, Installation height min./max.: 600-1,400 mm, Ram stroke: 800 mm, Ram adjustment: 200 mm, Table draw cushion pressure: 5-160 t, Table draw cushion stroke: 350 mm, Ram draw cushion pressure: 5-40 t, Ram cushion stroke: 125 mm, 2x two-hand operation, safety guard system, press control, 2 accessory cabinets with contents. +++ Attention: This machine is part of an online auction! +++ Djdpox R D R Uefx Ab Ujcf

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Dcedpfx Ajx R Efteb Uof +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Dcsdpfx Aex Ry Tfeb Usf +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Dcodpfx Aex Rzkxsb Usf +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1992, Manufacturer: ONA-PRES, Model: EBd-100-4.5-AB, Year: 1992, Serial No.: P-01125, Maximum pressing force: 1,000 t, Table size: 4,500 x 2,700 mm, Ram stroke: 1,400 mm, Installation height: 800 - 2,200 mm, Table draw cushion: 60 - 250 t, Draw cushion stroke: 300 mm, Ram cushion stroke: 200 mm, Press control, additional control for ram, 5-piece cabinet assembly with accessories Dcedpfjx R Dx Esx Ab Ujf +++ Attention: This machine is part of an online auction! +++

Condition: good (used), Year of construction: 2013, pressing force: 175 t, stroke length: 265 mm, clearance between the columns: 2,550 mm, total length: 4,250 mm, total width: 2,550 mm, total height: 2,750 mm, overall weight: 11,500 kg, Equipment: - 2 support arms - DELEM DA 66 T control - Controlled axes: Y1 - Y2 - X - R - Crowning - Side safety doors - AMADA tool holder Dodsyyk D Hjpfx Ab Uscf - Foot switch

Condition: good (used), Year of construction: 2015, pressing force: 100 t, stroke length: 265 mm, clearance between the columns: 2,050 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,900 mm, overall weight: 7,900 kg, Equipment: - 2 support arms - DELEM DA 66 T control system - Foot switch - AMADA tool holder Dcodpfx Aboyyk Avj Ujf - Crowning - Controlled axes: Y1 - Y2 - X - R - Side safety doors

Condition: good (used), Code: 0278 Brand: COMIL BIESSE Model: COSMO Djdpfoyyzvgex Ab Uscf Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Working height mm 1200 Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Insertion height: 345 mm -Column clearance: 300 mm Dodpfx Absyxda Ss Uscf -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, Used press brake from Haco (Simat) Type: PRM 30100 Dcedpfx Aoywv Nijb Usf Capacity: 3050 x 100 tons Adjustable back gauge and depth Equipped with Multi V die and upper gooseneck blade

Year of construction: 2004, condition: excellent (used), machine/vehicle number: 2151, KNUCKLE JOINT PRESS "GRABENER" TYPE GK 360 Manufacturing origin CE - France Voltage 380V/50Hz/3ph Netweight 8800 kg Dcodpfed Hpcysx Ab Ujf Custom position 8462.1020 Dimensions 230x170x260 cm TECHNICAL DATA Power in tons 360 T. Table length 440 mm Table width 525 mm Ram stroke 60 mm Number of strokes 60 / Min. Motor power 11 kW errors and omissions excepted-data given without obligation

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Dedpfx Aoynbfveb Uscf Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series