Used Hss Twist Drill for sale (5,320)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Hsdpfju Tln Nsx Af Aofk Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Hfodpfeiy Ekvex Af Ask Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Hsdpehik Ezsfx Af Aefk Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Hedpoghtvasfx Af Aefk Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Hodpfxer D T U Dj Af Asfk Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Hfjdpfx Ajznvibof Ask Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 23726

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel Hedpfxszn Ah Re Af Aefk - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, functionality: fully functional, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Hedjyh Uaqopfx Af Asfk Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Hsdpfx Afozumt Re Aefk Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. Hsdpfx Afey Sv Tqj Asfk High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.] Hsdpfjv Aalysx Af Aofk

Condition: good (used), Year of construction: 2018, Flame-Cutting Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross conveyor Number of carriages: 2 clamps NC feed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table with chute into material collection container for discharging small components. Filter unit incl. piping Powerful for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring LANTEK license Hfedevzrczspfx Af Ask 11826ä Availability: immediate!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Hedpsw I Uy Tefx Af Ajfk Location: Röllbach

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Hsdpfjzqz Rcjx Af Asfk Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Hfedozqz N Eepfx Af Ask Lateral horizontal groups: yes

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. Hjdpszr N Raofx Af Ajfk A wide range of accessories and a user manual for the machine are included. Clean and good condition

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 06060408, Description Grass Flexi Press (2006) including accessories Due to the purchase of a CNC machine, this professional Grass Flexi Press hinge and fitting drilling machine is no longer needed. The machine has always been well-maintained, has undergone annual inspections, and is in excellent/good condition. Ready for immediate use in the workshop! Specifications & Details: Make/Model: Grass Flexi Press Year of manufacture: 2006 Hsdpfx Ajzrvaujf Asfk Condition: Well-maintained and annually inspected Includes: Various accessories / drill bits Reason for sale: No longer needed due to switching to CNC Interested or have questions? Please feel free to contact us for more information or to arrange a viewing of the machine.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland Hfodsq Ii Dljpfx Af Ajk TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: Hfsdpfjw Iqdzex Af Ajk - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Hfjdpjxwaz Hjfx Af Aek

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Hjdpoxnlflofx Af Asfk

Condition: used, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles, designed for automatic drilling of holes in materials of specific dimensions. The machine features an automatic feeder that streamlines the machining process by automatically feeding and clamping the material. The MM05/3L's technical specifications include: - 7 oscillating spindles, - adjustable oscillation, - pneumatic material clamps, - production capacity of several hundred pieces per hour. Hedpjxrpciofx Af Aofk The machine features a robust construction, flexible work settings, and CE certification, ensuring safety and compliance with European standards. It is suitable for production applications requiring precise multi-point drilling on a variety of materials, typically found in the furniture and woodworking industries. The automatic material feeder, working in conjunction with the multi-spindle drilling unit, increases the efficiency and repeatability of production processes, minimizing operator involvement and improving work ergonomics.

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units Hfjdpfx Asxrmptsf Aok - 2 vertical units - 4 front-mounted units (two on each side)

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Hfodpfsxykctox Af Aok The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 42411/405, drilling capacity: 32 mm, overall weight: 2,300 kg, High-speed radial drilling machine ALZRAPID 32 D in very good condition, taken from ongoing operation, including Heidenhain digital display ND 1202 R. The machine has been regularly serviced and inspected. *TOOLS SHOWN IN THE PICTURE ARE NOT INCLUDED* Hfodjztkupjpfx Af Ask Clamping surface: approx. 1200x830 mm Base plate: approx. 1200x830 mm Tool holder: MK 4 short spindle Continuous drilling capacity in steel/cast iron: 30/32 mm Drilling capacity in steel: 40 mm Thread in steel: M24 Thread in cast iron: M30 Spindle speeds: 12 stages from 102 to 2,000 rpm Spindle stroke (quill stroke): 150 mm Three automatic feeds 0.1-0.2-0.3 mm/rev Overhang: max. 725 mm Weight: 2300 kg