Used Hydraulic Augers for sale (14,364)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. Hodpfx Abeyizxrsrenh The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1990, pressure 500 t weight of the machine ca. 5 t Hnjdsykb Ivjpfx Abrsh

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Control: Conventional - Table width: 500mm - Throat depth: 350mm - Table length: 740mm - Ram width: 250mm - Ram length: 250mm - Model: Hydraulic - Max. stroke: 250mm - Power: 100.0ton - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg Hnsdpfxox N Sxde Abreh - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, workpiece length (max.): 4,100 mm, - CNC frontgauge; 2 plate supports: one fixed: can feed plate into the machine, max 4000 mm one mobile: can feed plate into the machine, max 2000 mm Hodpfx Asyiguiobronh CNC backgauge CNC blade angle setting CNC blade clearance setting Plate support system Conveyor belt Scrap container (for first cut) Ideal machine for cutting large sheets as well as small strips! Max sheet thickness inox: 5 mm Backgauge: CNC Siemens Evacuation system: yes

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm Hnodpfx Aeyi Acfjbroh -Weight: 9.3 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm Hjdjyiz Nwjpfx Abrjnh -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. Hnjdpot Tqkdsfx Abreh cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic Hnsdpfx Aex Srwfsbrsh - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg New - unused

Condition: excellent (used), Battenfeld Calzoni hydraulic motor MRE5400/5401/33800 A1640538 Hnsdeyiticjpfx Abrjh

Condition: refurbished (used), overhauled Rexroth double pump for Krauss Maffei SGM machines. Service, repair and exchange of hydraulic pumps Rexroth, Voith, Bosch, Moog. Hnjdpfxjyithlj Abrsh

Condition: excellent (used), Calzoni MRE 8200M Battenfeld No. 21640527 Hedpjyitfqsfx Abrenh

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm Hjdpeb A Rr Rsfx Abronh -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Hnedpsxwmycsfx Abrjh Operating manual and circuit diagrams included

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 Hjdpfxoxwmv Ds Abrjnh working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 Hnodox Rbhdopfx Abrsh working width 8100 mm maximum sheet thickness 6 mm motorized backgauge automatic blade gap adjustment automatic cutting angle adjustment sheet support device

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm Hnedpfx Abow N Su Dorjh - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 2.2kW Hnsdew N St Hopfx Abrjh - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg Hnodpfoxywkqox Abrsh - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 2,700 mm, total width: 2,550 mm, total length: 1,350 mm, Empty weight: 7.000 kg Hsdpfsx Ad Hkox Abrenh - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Control: Conventional - Motor power: 20.0kW - Table width: 525mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 200mm - Power: 63.0ton - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Original Caterpillar filter (new / unused / original packaging) Overview of available types (some are in multiple quantities): 1G-8878 1P-2299 1R-0716 Hnodpfsyka Uzjx Abrsh 1R-0734 1R-0739 1R-0750 1R-0751 1R-0762 4I-3948 144-6691 151-2409 157-3862 269-8325 299-8229 308-7298 389-1079 462-1171 9N-3368 Attractive unit prices starting at 5 EUR. Filters can be purchased individually or as a lot (at special prices).

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Hnedpfx Absxpuipjreh

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Hnsdpfxev Srfwj Abreh Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW Hsdpfjyif Nrjx Abrjnh weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, stroke rate (max.): 28 1/min, sheet thickness (max.): 4 mm, Hydraulic Guillotine Shear Make: HERA Model: HSS 3 2500x4 Year: 1981 Technical Specifications Manufacturer: Hera Model: HSS 3 Working Length: 2500 mm Capacity: 4 mm Passage: 2600 mm Throat Depth: 200 mm Strokes: 28 min⁻¹ Motor Power: 5.5 kW Dimensions: approx. L 3.10 x W 2.00 (plus support arms) x H 1.40 m Weight: approx. 4 t Equipment • Motorized back gauge with digital display 1000 mm • Angle gauge 1000 mm • 2 support arms • Central blade gap adjustment • 1 spare blade Details provided without guarantee. Hnodpfx Abjwvi Eboroh A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1976, liter capacity 90 l/min tank contens 100 l voltage 220 / 380 V tank dimensions ca. 800 x 380 x 400 mm Hnjdpfov Dxz Aox Abreh height with motor ca. 900 mm power capacity 2,2 kW weight 57 kg The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m².