Used Hydraulic Augers for sale (15,722)

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Redewxw Amspfx Aa Isw Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Rodpoul U Svofx Aa Ijw Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Rodpfx Aaowxw H Ej Ijw Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: ready for operation (used), Ross Parker Hannifin MG051210AAAB hydraulic motor, housing diameter: 93 mm, drive shaft diameter: 25.5 mm, mounting hole spacing: 106 mm, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rjdpfxoi Ec D Ue Aa Iew

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Rodpfx Aszcm Ncoa Isw Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), mileage: 544,203 km, power: 390 kW (530.25 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Roof spoiler - High beam headlights - Television - Speed limiter - Intarder - Tilting hydraulics - Air conditioning - Leather interior - Leather upholstery - Alloy wheels - Air suspension - Air horn - Particle filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Bumpers in body color - Automatic heating system - Power take-off (PTO) = Notes = DAF XF 530 Hydraulic Retarder 544,203 km 2020 Full spoiler Full air suspension Alcoas Smart Tacho 2 Leather seats Air-suspended seats Seat heating/ventilation 2 sleeping berths Navigation Television Microwave Refrigerator Roof air conditioning Auxiliary air conditioning Air conditioning ACC (Adaptive Cruise Control) Cruise control Lane departure warning Automatic transmission Euro 6-D 4X2 TÜV/MOT/APK valid until 05-2027 French truck Chassis number: XLRTEH4300G317615 Video of the truck: EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transportation to any port in the Netherlands and Belgium • Truck transport with trailer Redpfxszg E Dfj Aa Iew The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Axle brand: HANKOOK Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Alloy wheels; Max. axle load: 8000 kg; Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Rear axle: Tire size: 315/80R22.5; Dual tires; Differential lock; Alloy wheels; Max. axle load: 13000 kg; Tire tread depth left inner: 85%; Tire tread depth left outer: 85%; Tire tread depth right inner: 85%; Tire tread depth right outer: 85%; Reduction: single reduction Weights Unladen weight: 8,065 kg Payload: 10,935 kg GVW (Gross Vehicle Weight): 19,000 kg Interior Upholstery: Leather Maintenance, History and Condition APK (Technical Inspection): valid until 05.2027 Technical condition: very good Optical condition: very good Further information Please contact Olivier Geerts or Edwin Geerts for further information.

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump Rsdpfsvwi E Ejx Aa Isw -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 6x pumps available -Price: per piece -Dimensions: 100/92/H84 mm -Weight: 2.0 kg

Year of construction: 1997, condition: used, functionality: fully functional, load capacity: 45,000 kg, 20/40‘ Hydraulic Spreader Condition: Ready for use and fully functional Redjwpm E Sopfx Aa Isw Technical Condition: very good Description: In addition to this ELME model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this CH 20-40. P.S.: Our master forklift workshop specializes in repair, restoration, overhaul, and custom-built forklifts from 8 tons upwards. We are also happy to put your vehicle on sale for you on commission at our place.

Condition: used, power capacity 1,5 kW working pressure / bar pump capacity / l/min engine Make: AC motors Type: FBPA 90L-4 Power: 1.5kW - 1.8kW Rotation: 1400 rpm - 1680 rpm Tank volume: 14 liters Q (L/min): 3.2 Rjdpfx Aszcgkgea Isw

Condition: used, power capacity 1,5 kW working pressure / bar pump capacity / l/min Make: AC motors Rjdpfszcgg Isx Aa Iow Type: FCA 0L-4 Power: 1.5kW - 1.8kW Rotation: 1400 rpm - 1680 rpm Tank volume: approx. 14 liters

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPP94011, mileage: 158,000 km, power: 367.75 kW (500.00 HP), first registration: 06/2024, fuel type: diesel, tire size: 385/55 R 22.5 - 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,750 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, cruise control, hydraulics, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, NM0KCXTP6KPP94011 STANDARD EQUIPMENT: 2 bellows (C2AS) rear air suspension ▪ Air-sprung cabin ▪ Automatic climate control ▪ Bed zone remote control ▪ Black grille ▪ Body-coloured exterior mirror cap ▪ Body-coloured front bumper ▪ Body-coloured bonnet ▪ Cruise control & speed limiter ▪ Driver's seat - heated & air suspension ▪ Dry air cabin heating ▪ EBC (electronic braking system) ▪ Electrically heated and electrically adjustable mirrors ▪ Electrically operated sliding roof ▪ Front & rear protection against underruns ▪ Long front bumper ▪ Switchable air compressor ▪ Maintenance-free front wheel bearing ▪ Wheel chock ▪ DAB radio ▪ 2.47 FDR OPTIONAL EQUIPMENT: ▪ Fifth wheel 1100m ▪ 19T MTM ▪ 385/55 Continental front tires ▪ 315/70 rear ▪ 8T front axle ▪ XSS-470 rear axle ▪ 1350 liter fuel tank ▪ Connection tipper hydraulics Discover our dealers via the website fordtrucksbelux.be Interested? Feel free to contact us: Rjdpfx Aswaimtsa Iow - Herman Noyens Trucks NV

Condition: used, New: No Part suitable for: trucks General condition: good Technical condition: good Rsdpfx Aajwwtkws Iew Optical condition: good VAT/differential taxation: VAT deductible

Condition: good (used), Year of construction: 1993, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Rsdpfozhmx Tex Aa Iow Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: good (used), Year of construction: 1995, 2-column spotting press MOSSINI PO/2M/P800, No. 0481, year of manufacture 1995, pressing force 800 t, working area 3,200 x 2,000 x 1,800 mm Rjdpoyhquaefx Aa Iew

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Rodpsv E Nlzofx Aa Iow Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, New: No General condition: very good Technical condition: very good Visual appearance: very good Production country: CH Please contact Vink Machinery for more information Menzi Muck Cylinders * Double-acting Redpfx Aajx Aiy Ne Isw * Equipped with two non-return valves * Cylinder diameter: 60 mm * The cylinder eye is 50 mm internal * Retracted center-to-center distance: 700 mm * Extended center-to-center distance: 1070 mm * Price is per unit!

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution Rodpfx Aszd H U Hea Isw - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: new, Made to order! Delivery throughout Europe! ---FINANCING---HIRE PURCHASE---LEASING--- -possible, please contact us!- Silage container, suitable for Krampe, Fliegl, Pronar, Oehler, metaltech hooklift trailers. Spant-free design with hydraulic volume tailgate! Capacity: Approx. 44 cubic meters! Clear internal dimensions beside the tunnel (L x W x H): 7500x2430x2300mm Internal floor length behind the tunnel: 7050mm Rjdpfx Aaozhnqws Isw Hook: 450mm, tunnelled!!! Unladen weight: 3810kg Other dimensions are possible! Material quality: SJ235 (ST37-2) Floor plate / wall plates: 5 / 3 mm -Subframe UNP 220 = 22000kg total weight -Hook 60mm -Rollers reinforced -Perforated metal grating on the front wall, foldable -Perforated metal grating in the "hook tunnel", welded in place -Double-acting hydraulic cylinders -Hydraulic connection at the rear, lower left Optionally available: -Galvanized grain slide -Hydraulic connection on the hook Roll-off container according to DIN 30722 -H-mount, -Reinforced and raised front -Galvanized and replaceable ladder according to UVV -Warning marking according to DIN 67520. Further options: -Roller cover -Second ladder -Lashing eyes in the floor and on the front wall -Hydraulic folding net for covering / load securing -Hydraulic Transcover system -Branding with your advertising What distinguishes us from others? -Robot-welded component groups -All weld seams are continuous along the spars -All containers are shot-blasted -Double primed -Double painted -All containers have nameplates and a valid UVV inspection.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Redpozg Tg Usfx Aa Ijw Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Rsdpfezg Tg Iox Aa Iew Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Rsdpfx Ajzg Tgzea Ijw Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: good (used), mileage: 934,288 km, power: 500 kW (679.81 HP), first registration: 04/2014, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2014, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, navigation system, parking heater, traction control, Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 7100 kg; Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 12600 kg; Suspension: air suspension Weights Empty weight: 7.660 kg Carrying capacity: 11.340 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - hydraulic - Hydraulic installation - PTO - Radio/Cd/Audio system Rjdpfxozgt Ewj Aa Isw - Radio/CD player - Sleeper cab - Vehicle heater - Visor

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Rsdpfewnz Apjx Aa Isw Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Rjdpfov Hpnlsx Aa Iow Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Rodpev Hp T Ujfx Aa Iew Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.