Used Hydraulic Wedge for sale (15,294)

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21319 Specifications: 2020 model Hydraulic rock splitter 600 bar 23.5 kg Hydraulic generator Weight for hammer Ready for delivery Description: We have a 2020 sp400 Hydraulic splitter w/ Air hammer, plumb bob and hydraulic generator for sale. Everything works as it should and has been used little. Bwodoxcfncspfx Aaqow Ready for delivery Own weight: 23

Condition: used, Year of construction: 1990, sheet width . mm plate thickness . mm Bwjdsun U Rdopfx Aaqsw distance between columns . mm Control Siemens Simatic OP17

Condition: used, functionality: fully functional, Year of construction: 2010, Used 3 meter guillotine shear by Durma Model: VS 3010 Capacity: 3100 x 10 mm Delem DAC 350 control Electric backgauge Electric cutting angle adjustment Pneumatic high support table Bedpfx Aasxqm Tpsqeww Year of manufacture: 2010

Condition: used, Hydraulic power unit with BOSCH REXROTH hydraulic pump Hydraulic power unit Operating pressure: max. 100 bar Flow rate: 12 liters/min at 0 bar Flow rate: 12 liters/min at 50 bar Flow rate: 2 liters/min at 100 bar Tank capacity: approx. 170 liters Motor speed: 1400 rpm Motor power: 2.2 kW Power supply: 380 Volt, 50 Hz - 1 unit BOSCH REXROTH vane pump, type 1PV2V3-40/12 RA01MC100A1 - Hydraulic tank with inspection cover and oil level sight glass - Tank dimensions (L / W / H): 900 x 540 x 450 mm Bwjdpjxrgu Nsfx Aaqjw Installation space required (L x W x H): 900 x 580 x 770 mm Net weight: 150 kg (without oil)

Condition: good (used), Year of construction: 1972, functionality: fully functional, 1.0 pc Vertical press for application: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Model: PRKP120 Year of manufacture: 1972 Pressing force: 120 tons Table: 1,200 x 1,000 mm Additionally heated table area: 800 x 800 mm Installation height: 810 mm Bwsdpfxjwzaxpo Aaqsw Stroke: 790 mm Opening: 1,600 mm

Condition: good (used), Year of construction: 2009, FEATURES Useful cutting length: 3.2 m Max. thickness steel S235JR: 6 mm Weight: 7,200 KG Overall dimensions (cm): 390x180x170 Power supply: 400 V 3-phase Power: 7.5 KW Max. cutting rate: 14 cuts/min Electric rear stop, adjustable from 15 to 650 mm Digital display and fine adjustment with handwheel 1 m alignment gauge with ruler, T-slot and retractable latch Hardened steel blades, 4 cutting edges Fixed cutting angle of 1.5° Manual blade clearance adjustment on the side Table equipped with 18 balls to prevent marking the sheet 2 front supports, each 1 m Cutting line lighting Bodjxp R Afspfx Aaqsww Slotted grid for narrow strips Oil tank Foot pedal control Rear light curtain guard

Condition: used, Year of construction: 2021, operating hours: 272 h, fuel type: diesel, Serial number: F1BA0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21549 Specifications: 2021 model 272 hours Bwjdpexpdmksfx Aaqow 85 kW 14500 kg Lifting capacity of 12000 kg Lifting height: 3000 mm Hydraulic forks Side shift Tires (see pictures) Radio Light Air conditioning/ac Ready for delivery     Description: We have a 021 Hangcha CPCD120 Forklift w/ hydraulic forks, side shift and low hours for sale. The truck is like new and has few hours. Everything works as it should and services have been taken care of. Ready for delivery Hours: 272 Own weight: 14500 Lifting heigth: 3000 Lifting capacity: 12000 Kw: 87 Model: CPCD120 Gaffeltruck m/ hydrauliske gafler, sideforskyvning og lite timer

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm total power requirement . kW weight of the machine ca. 4 t Bodpfsw Syfcox Aaqeww

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Bwjdpfxogr Ur Ro Aaqow Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Engine power 30 cv

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Bwsdjxrgu Ajpfx Aaqew Power supply: 400 Volts, 50 Hz - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Condition: good (used), functionality: fully functional, Used guillotine shear from LVD Type HST-C 31 13 Electric backgauge Adjustable cutting angle Capacity 3100 x 13 mm Bwjdpfx Aajxqgi Roqew Pneumatic support table

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Bsdoxr Azxjpfx Aaqoww Video about functionality available

Condition: used, Year of construction: 2010, Serial number: SKBE48S338KE1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18968 Bodjvgz Aujpfx Aaqoww Specifications: - 2010 model - 3 axle - Tires (see pictures) - Hydraulic driving bridge - Width: 255 cm - Ready for delivery Description: Everything works as it should according to the previous owner. Ready for delivery Technical approved: Yes EU-approved until: 20.10.2025 Own weight: 9460 Total Weight: 48000 Payload: 38540 Width: 255 Length: 1340 Model: Maskinhenger m/ Hydraulisk kjørebru

Condition: used, Year of construction: 1999, stroke 650 mm Bodpfx Aowzyudoaqsww 1417 cylinder durchmesser 250mm weight of the machine ca. 3,4 t t

Condition: ready for operation (used), Year of construction: 2009, Injection Unit Screw diameter 180 mm Clamping Unit Clamping force 3300 kN Bodpfoxulbtox Aaqeww This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder Bwjdpfx Asgv Dikeaqow -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

Condition: used, 1 piece PEDDINGHAUS HYDRAULIC 502 punching machine with digital display PEHU 101 and roller conveyor approx. 10m long, as per pictures and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 2 + storage rack in the outdoor area. Shipping: Collection only – no shipping offered for this item! Bedpfx Ajxrcvveaqsww

Condition: good (used), Maximum pressing force 10 tons. Bodpsxr Azfjfx Aaqsww Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: new, Year of construction: 2025, pressure 400 bar pressure 100 t Bwsdpfjxqrgnox Aaqsw stroke 400 mm 900 mm 1500 1/min 12 l/m 31 l quantity of oil 40 l pre-running speed 8,2 mm/sec return speed 13 mm/sec weight of the machine ca. 1100 kg height 2450 mm 900 mm 1320 mm distance between columns 1010 mm distance between columns 300 mm Integrated pressure manometer In height adjustable working table

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Bwodpfjw Syd Eox Aaqow

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Bwjdpfx Aaoxqtapjqsw Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), empty load weight: 1,800 kg, total length: 1,200 mm, total height: 1,500 mm, 300 x 300 mm force: 45 ton Bwedpfxoxpymgj Aaqsw Capacity: 10 mm Strokes/min: 45 str/min Fixed angle -- variable angle: fixed Workspace: 1200 x 770 mm Electric motor (power): 10 hp Depht: 1500 mm

Condition: used, 1 unit hydraulic horizontal multipurpose press VEB PRESSENBAU DESSAU PYXWM160 as per images and inspection, self-dismantling. Colour: green. Condition: used. Payment method: advance payment via bank transfer. Storage location: Hall 2. Shipping: Collection only – no shipping offered for this item! Bedpfx Aoxrcu Eeaqeww

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Bjdpfx Aajxr Ay Ueqoww Motor power: 3 kW

Condition: used, 1 unit Hydraulic Guillotine Shear ERMAKSAN CNC HGD 3100x10 Cutting length approx. 310 cm, as per photos and inspection, self-dismantling Color: grey Bsdpexrch Eefx Aaqsww Year of manufacture: 2014 Condition: used Payment method: advance payment by bank transfer Location of goods: Hall 1 and rack in outdoor area Shipping: Collection only – No shipping offered for this item!