Used Hydraulic Workshop Press for sale (30,468)

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. Dksdpez Sva Hjfx Ak Aew SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Djdpfx Aotndu Uek Askw CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. This is a robustly built machine, equipped with: Dodpj Aggbuofx Ak Ajkw • Work table with wedges and support pieces, as seen in the photos. • Control panel with analog gauges. • Separate hydraulic unit with a Siemens motor. • Protective housing around the work area.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons Dodeztfbwepfx Ak Ajkw -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 30065320, functionality: fully functional, power: 14.71 kW (20.00 HP), pressing force: 50 t, stroke length: 500 mm, operating speed: 63 mm/s, reverse speed: 350 mm/s, table width: 500 mm, table length: 800 mm, throat depth: 250 mm, distance table to ram: 650 mm, oil tank capacity: 235 l, total length: 920 mm, total width: 1,420 mm, total height: 3,100 mm, Equipment: CE marking, documentation/manual, 50-ton swan-neck hydraulic press by Benedetti in excellent condition. Machine available for immediate sale and can be viewed at our workshop in Peschadoires, France. Dkedpfx As Ahxqvsk Asw The press is equipped with a new electrical control panel and has a CE marking. A technical file will be provided with the machine. Please find attached photos of the press and the technical data sheet. Price upon request.

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Djdj Aa Ndyjpfx Ak Aokw Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: like new (used), Year of construction: 1988, machine/vehicle number: 2240 & 2250, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 180 mm, operating speed: 12 mm/s, reverse speed: 160 mm/s, table width: 410 mm, table length: 540 mm, clearance between the columns: 300 mm, oil tank capacity: 300 l, total length: 1,010 mm, total width: 1,130 mm, total height: 2,435 mm, overall weight: 2,600 kg, Equipment: documentation/manual, Two EXNER 150T hydraulic presses are available for immediate sale and can be viewed at our workshop in Peschadoires, central France. Both presses are in excellent condition, as shown in the attached technical specifications and photos. Operating manual and technical documentation are available for each machine. Price upon request. Dkodpfj Ahq Dusx Ak Ajw

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: 1053, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 220 V, pressing force: 500 t, stroke length: 400 mm, table width: 900 mm, table length: 1,000 mm, distance table to ram: 400 mm, total length: 2,300 mm, total width: 1,800 mm, total height: 4,500 mm, overall weight: 18,000 kg, Equipment: documentation/manual, safety light barrier, Hydraulic press with arch frame, 500-ton capacity, with heated platen. The machine is in perfect condition, available for immediate sale, and can be inspected at our workshops in Peschadoires, France. Technical documentation is included with the press. You will find the photos of the press and the technical data sheet attached. Price available upon request. Dkedpfo Ahy Dgsx Ak Asw

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. Dkodez Icrtopfx Ak Asw A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Djdpfx Aj Ah Sk Iok Ajkw Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, pressing force: 1,600 t, stroke length: 1,600 mm, oil tank capacity: 3,500 l, total height: 6,900 mm, overall weight: 72,000 kg, Engines: Main engine approximately 55 kW, 2 HD pumps each approximately 4.5 kW. Dkodpfx Ake Aibbtj Aew

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Djdpfx Aj Adu Sdek Askw Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Press force: 110 tons Table dimensions Length: 1,200 mm Width: 600 mm Number of slots: 3 MACHINE DETAILS Manufacturer: Chin Fong Type: OCP 110 N Year of manufacture: 1994 Machine type: Hydraulic press Dimensions Length: 2,500 mm Width: 2,000 mm Height: 3,500 mm Weight: 10,000 kg EQUIPMENT Table with 3 slots

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Dodsv Sd S Nepfx Ak Askw Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm Dksdpfxez Ib R Ij Ak Ajw System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Dedpfx Akofh Izmj Aekw Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused Dkjdpfjz Afhpsx Ak Aow

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V Djdpfx Akszq Apgo Askw ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: good (used), Year of construction: 1979, functionality: unexamined, pressing force: 40 t, overall weight: 5,000 kg, Equipment: safety light barrier, SHC 40 Hans Schoen Dksdpfoz S E S Sex Ak Asw

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Dkedpfx Aksz Nkuae Asw Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Dodpfxs Adu Rys Ak Ajkw Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 835, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 890 mm, table length: 1,460 mm, table height: 600 mm, total length: 1,800 mm, total width: 2,120 mm, total height: 3,550 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm For sale is an oil-hydraulic 4-column forming machine from August Luigart & Sohn GmbH u. Co. KG with a maximum pressing force of 200 T. The machine has a table size of 1,460 × 890 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it suitable for forming, stamping, straightening, and assembly work in industrial applications. ##### Technical data + Information: Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm ==== General information - Reference ID: TPT-08 - Manufacturer: August Luigart & Sohn GmbH u. Co. KG - Design: Oil-hydraulic 4-column forming machine - Model: 4 SPY 200 SO - Machine number: 835 - Year of construction: 1997 - Pressing force: 200 T - Rated force: 2,000 kN - Table size (working area): 1,460 × 890 mm - Table height: 600 mm - Open height: 800 mm - Installation height: 800 mm - Stroke: 400 mm - Ram width: 1,460 mm - Lateral passage: 450 mm - Total height: 3,550 mm - Total width: 2,120 mm - Total depth: 1,800 mm - Total weight: 12,500 kg - Max. upper tool weight: 2,500 kg ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 300 mm - Piston rod diameter: Ø 270 mm - Guide column diameter: Ø 160 mm - Stroke: 400 mm - Max. working pressure: 285 bar - Return speed downwards: 200 mm/s - Return speed upwards: 251 mm/s - Pressing speed: 37–11 mm/s - Setting speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 32.5 kW - Oil tank: approx. 850 l - Hydraulic oil: HL / HLP ISO VG 46 - Oil filter fineness: < 25 µm - Max. oil temperature: 60 °C - Vibration damper: EFFBE LM 7-100 - Foundation according to manufacturer's specifications required ==== Tooling - Number of T-slots: 5 - T-slots: T22 M20 according to DIN 650 ==== Control - Control: no PLC - Control panel: on the frame - Light curtain / light barrier: available - Two-hand operation: available ==== Safety - Decay time: 82 ms - Decay distance: 164 mm - Safety distance: 13 mm - Protective grid: available - CE-compliant design ==== Electrical connection - Operating voltage: 415 V - Power supply: 3PEN - Frequency: 50 Hz - Conductor cross-section: 25.0 mm² - Fuse rating: 80.0 A - Rated current: 64.2 A - Control voltage: 230 V AC - Valve voltage: 24 V DC ==== Environmental conditions - Ambient temperature: +5 to +40 °C - Relative humidity: 30–95 % (non-condensing) - Installation altitude: max. 1,000 m above sea level - Noise level: < 70 dB(A) ##### Dksdpfxe Ad Haye Ak Ajw Application areas: Forming, stamping, straightening, embedding, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Oil-hydraulic 4-column forming machine, 4-column forming machine, hydraulic press, August Luigart press, 4 SPY 200 SO, 200 T press, 200 ton press, forming press, stamping press, straightening press, embedding press, industrial press)

Condition: used, Year of construction: 1994, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Sahinler Type: GHP 100 Hydr Machine Type: Hydraulic press Dksdpfe Aaz Rlsx Ak Ajw Pressing force: 100 t Machine weight: approx. 4 t Working Area Reach: 280 mm Ram stroke: 300 mm Table and Ram Table size: 1,000 × 600 mm Ram clamping surface: 600 × 400 mm Additional ram plate: approx. 900 × 600 mm Dimensions Overall height above floor: 300 mm Overall width: 1,200 mm Electrical Data Operating voltage: 380 V EQUIPMENT Additional ram plate, approx. 900 × 600 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Dkjdpfx Akjzvnpis Asw Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Dkedpfx Akoz Rk Nye Aow 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools Dkodsyilh Iepfx Ak Aew -we bought this maschine as new for 340 000 EUR in year 2019