Used Hydraulic Workshop Press for sale (30,528)

Year of construction: 1992, condition: used, Hydraulic Press Manufacturer: HYDRAP Type: HP SK 40 Year of manufacture: 1992 Technical details: Dkjdszdvcaepfx Ak Ajw Pressing force: 40 t Effective stroke: 500 mm Drive power: 17 kW Overrun distance: 48 mm Overrun time: 110 ms Safety distance: 176 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm Djdpfxjxukpce Ak Ajkw hole in the table 130 mm

Condition: good (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: Darley Model: 100 3100 Year of manufacture: 1995 Control system: DR 23 Max. bending force: 100 tons Max. working width: 3100 mm Axes: Dsdpfx Aj Ahwkksk Aekw Y1 and Y2, X1 and X2 Back gauge: 1500 mm Front gauge: 1300 mm SIK safety device Full-length tooling We can send a video via WhatsApp if we have a phone number.

Condition: good (used), Year of construction: 1967, machine/vehicle number: 6043, Offer 26180 Dodpfx Akj Afxanj Aokw Technical data: - Maximum pressing force: 100 t - Maximum ram stroke: approx. 500 mm - Installation height: approx. 1000 mm - Overhang to center of ram: 520 mm - Ram clamping surface: 350 x 350 mm - Ram clamping pin: 40 mm - Table size: 1000 x 1150 mm - Table opening: 150 x 780 mm - Table height above floor: 720 mm - Drive: 400 V / 8 kW - Space requirement: approx. W 1150 x H 2900 x D 2150 mm - Weight: approx. 4800 kg

Condition: good (used), functionality: fully functional, Robust hydraulic press, type HES 16MP, manufactured by Hydraulische Pressen und Maschinenbau GmbH (HYPREMA). Depending on the tooling and permissible load, the machine is suitable for typical pressing and straightening operations, such as aligning, pressing in, and pressing out components. Dodpfx Asumk Najk Aekw The model designation HES 16MP indicates a nominal pressing force of approximately 16 tons. The installed pressure gauge has a display range up to 25 MPa (25 tons). Model: 7092513 Type: HES16MP General: - Pressure gauge display, pressing force: 0–25 MPa (0–25 tons) - Pressure gauge display, hydraulic pressure: 0–400 kp/cm² (approx. 0–392 bar) - Design: Hydraulic single-column press - Operation: Hand lever actuation

Condition: used, Year of construction: 1966, Technical details: Djdpfx Ajz Dgczsk Aekw pressure: 16 t distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Dedpfxjvcb Tlj Ak Aokw

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t Djdpfx Aju Nfq Esk Aokw max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Dkodpfx Aksz Nhp Is Ajw

Condition: like new (used), Year of construction: 2020, Table dimensions: 2000 x 1000 mm Dkedpfsz Impiex Ak Ajw Includes forming tools for 4-way edge bending (door).

Condition: excellent (used), Year of construction: 1984 Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Dodsryn S Ajpfx Ak Aokw Dimensions W x D x H: approx. 900 x 500 x 2150 mm

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB Dkodpfx Ajz Hgb Ask Ajw - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: new, pressure: 150stroke: 300working speed: 20Speed : 165messurements (LxWxH): 2200 x 2200 x 3250 HKP 150 – Hydraulic C-Frame Deep Drawing Press Standard Equipment: - Steel welded construction - Two-hand control panel - PLC control - Ram table with prismatic, maintenance-free slide system - Hydraulic components from well-known brands - Electrical components from well-known brands - Designed in accordance with CE regulations - User manual in English or German Technical Specifications: - Press Force: 1,500 kN - Hole in Die: Ø 120 mm - Stroke: 300 mm - Motor Power: 11 kW - Working Pressure: 254 bar - Machine Weight: 8,200 kg - Advance Speed: 85 mm/sec Dkodpfxjd Ab Igo Ak Asw - Working Speed (at max. pressure): 20 mm/sec - Return Speed: 165 mm/sec - Centre Distance: 320 mm - Die Table Dimensions: 750 × 1,200 mm - Ram Table Dimensions: 650 × 950 mm - Throat Depth: 550 mm - Machine Dimensions (L × W × H): 2,200 × 2,200 × 3,250 mm Optional Equipment: - Light curtain for additional safety: Standard - Touchscreen control: ¤ 8.880 net - Special table dimensions and stroke lengths available: Price upon request

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm Dkodpfxo Af I Tys Ak Aew - working width 150mm - working height 1350mm - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Net price: 69900 PLN Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Dksdpe Agxfgsfx Ak Aew Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm Dkedeu Nfudjpfx Ak Ajw ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm Dodpfou Nfmysx Ak Askw boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter Dkedpfx Aou Nfvusk Ajw *

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz Dodpfx Aoy N R Hmek Askw air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,200 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features • Pressing force of 250 kN (approx. 25.5 tons) • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Excellent access to the working area Djdpoyr Ek Rofx Ak Askw • Suitable for industrial and workshop applications • CE certified Technical Specifications • Pressing force: 250 kN (approx. 25.5 tons) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Ram stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 10 mm/s • Return speed: 14 mm/s • Motor power: 3 kW • Packed dimensions (L × W × H): 1100 × 850 × 1800 mm • Weight: 1200 kg Applications • Pressing • Bending • Straightening • Assembly operations • Metal forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, For sale: Energo hydraulic NC press - Type: GTVS 400 NC - Year of manufacture: 2008 - Serial no.: 461/08 Dksdpfx Akoz Iymne Ajw The hydraulic press is in like-new condition. It has 5,000 operating hours and has been used at minimal pressures, with a maximum force of 50 tons. It has been regularly serviced by the manufacturer, Energo. It offers high precision, with a ram depth accuracy of 0.01 mm and the capability for multi-step simultaneous programming, allowing you to set the depth, pressure, and pressing speed. It is connected to the power supply and ready for operation.

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Weight approx.: 200,000 kg Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Year of construction: 2,013 Condition: in working order Dkodjzyd Hlopfx Ak Asw Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: new, Year of construction: 2018, machine/vehicle number: DF0280, pressing force: 160 t, pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm Dodpod Ap Udofx Ak Aekw :200 mm/sec Monitor:10 Zoll

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm Dkodpfx As Ad Rlmsk Asw max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Fabricated construction with light guard and two hand switch.

Year of construction: 1995, condition: used, A hydraulic press brake with a working length of 2000mm is offered for sale. Pressing force: 320kN. Max. working length: 2000mm. Max. hydraulic pressure: 295bar. Stroke: 26-102mm. Approach speed: 102mm/s. Working speed: 8.5mm/s. Max. tool dimension: 2050mm. Control: control panel with selector switches and push buttons. Equipped with a two-hand control panel, side safety guards and tool holders. Weight: approx. 2400kg. Inspection possible by arrangement. Dkodpfx Ake Aga Iie Ajw