Used Injection Moulder for sale (2,485)

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! Ksdpfx Answftr Dsyolu *

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available! Klsdjy Iwlaopfx Anyou

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Klsdpfx Ajzcx Tmjnyju

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Kledszdrciopfx Anyju Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Additional Options: - 1 x hydr. core pull on movable plate - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), functionality: fully functional, 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Kjdpfoy Aic Tex Anyslu Model - SIMPLEX.

Condition: excellent (used), Year of construction: 2007, operating hours: 64,500 h, functionality: fully functional, clamping force: 110 kN, screw diameter: 40 mm, injection weight: 210 g, The Negri Bossi 110T in very good condition have full service history . The machine still in production screw size 40mm year of manufacture 2007 . One single hydraulic core and one single air eject Kedpozcwyxsfx Anyolu

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Kljdpfx Aszcwv Tjnyju

Condition: used, power: 4 kW (5.44 HP), rotational speed (max.): 12,000 rpm, rotational speed (min.): 6,000 rpm, table width: 920 mm, table length: 1,100 mm, total length: 1,200 mm, total width: 1,050 mm, total height: 1,700 mm, overall weight: 950 kg, No. 04533 Tilting spindle moulder Bäuerle SFM 2 Used Milling spindle tiltable from -5° to +45° Motor 4 kW Manually height-adjustable and tiltable (via handwheel) Table size 1100 x 920 mm LW Table height 820 mm Milling spindle speeds 6000 / 9000 / 12000 rpm Left/right rotation Max. height adjustment of milling spindle 110 mm Milling spindle taper MK 5 Mechanical motor brake (via foot pedal) Incl. 4-roller power feeder HOLZ-HER ETZ Incl. various accessories, milling tools and spare spindles (spindle diameter 25 - 40 mm) Kodpfozba Aaex Anyolu Transport dimensions machine approx. 1200 x 1050 x 1700 mm LWH, trolley with accessories approx. 1000 x 500 x 1000 mm LWH Weight approx. 950 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Ksdpfx Aow Tt R Isnyjlu Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Clamping plate set 570 central 125 mm Selection unit - extended graphics - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Condition: good (used), Code: 0399 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit and tilting spindle moulder for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Workpiece clamping press Tilting Spindle moulder 90-45° Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Tenoning table and head Electrical connection and removable support for the feeding Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Kedpfx Anszbmvaoyslu Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Kledpfx Anszd Ehxsyju

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Kljdpfjzardgsx Anyju Typ: 22 D Baujahr: 2004 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine Kedpfx Ajzaqzdenyolu Hersteller: DR. BOY Typ: 22 D Baujahr: 1999 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (6000 rpm) straight jointer Left (15 kW) - (6000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (6000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Kljdpfxsyrrhps Anysu Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED Kledpfjzd Tavsx Anyju AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation - Table dimensions: 1060 x 770 mm Kledpfx Aoza D N Uonyju - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, completely shut down used good condition cleaned function tested partially refurbished Manufacturer: Flottjet GS-tested kW: 2.2 Number of spindles: 1 Spindle diameter mm: 30mm Maximum tool diameter in the machine mm: 125 Table size l x w mm: 650 Table extension approx. mm: 2 x 300 Milling fence with fine adjustment Space required approx. L x W x H mm: 1260x500x1100 Weight approx. kg: 110 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, Kljdpozd Hdhefx Anyeu without guarantee and warranty.

Condition: used, Year of construction: 1993, from official source including chassis completely adjusted used in top condition low mileage cleaned functionally tested partially overhauled Manufacturer: Panhans Model: 259 Year of manufacture: 1993 Machine no.: 3582 GS-tested GS-tested for wood dust Motor kW: approx. 5.5 Kljdpfozd Hc Dsx Anyeu Swiveling range: -5 to 45° Motor-driven brake Motor with 2 speeds Pole-changeable Right-left rotation Table size L x W mm: 1100x750 Milling arbor diameter mm: 30 Milling arbor mounting: MK Wooden jaws Milling fence with fine adjustment Digital display for milling fence Digital display for diameter Control panel on top Swiveling control panel Socket for feed device Dust extraction connection mm: 2x120 Space requirement approx. L x W x H mm: 1100x1100x1800 Weight approx. kg: 950 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: used, Year of construction: 2000, operating hours: 71,316 h, functionality: fully functional, machine/vehicle number: 39027, clamping force: 220 kN, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Klodpfey D Saqox Anyeu You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved. Kledpjx Spw Asfx Anyou

Condition: excellent (used), Year of construction: 2001, operating hours: 99,000 h, machine/vehicle number: 154855, clamping force: 1,500 kN, screw diameter: 45 mm, The machine comes from a cleanroom environment used in medical technology and is in excellent condition, both visually and technically. Thanks to the prescribed regular maintenance, it has always been carefully maintained. Kodpfxozdyk Io Anyjlu

Condition: repair required (used), Year of construction: 2003, REP rubber injection press 25 Tons Year : 2003 Kedsizi H Hepfx Anyjlu The 4 columns are to be changed (9000€ of expenses)

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Kledjrdg Tpopfx Anyeu Year: 2000 IPC not working (see map)

Condition: used, Year of construction: 2007, Used LMG Leadermac Smart MA 423 model LMC-423S 4-spindle edge trimming machine workable width: 15-230 mm workable height: 10-150 mm minimum individual piece length: 200 mm spindle rotation speed: 6000 rpm Kljdpfx Anszfgvgsyeu 2-axis positioning with electronic control automatic motor start absorbed current: 52.5 A motor power: 1st motor: 7.5 HP 2nd/3rd motor: 10 HP 4th motor: 10 HP feed motor: 4 HP with cardan drive weight: 2200 kg year of manufacture: 2007 compliant with CE regulations

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) Klodpfeppigdsx Anyeu delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m