Used Internal Gear Pump for sale (22,468)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % Iodpfxsznz Ezj Acloif • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 2018, DOPAG P200 2H Drum Pump / Material Transfer Pump Isdozr Tz Aepfx Acloif Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product type: Pneumatic drum pump / material transfer pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Operating concept: 2-hand operation Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: Piston pump Compressed air treatment: Festo SMC valve type: VSA4244-00-1 The DOPAG P200 systems are designed for the transfer of highly viscous materials from 200-liter containers, e.g. adhesives and sealants or lubricants. Depending on the specific pump configuration, different transfer rates, gear ratios and material ranges are possible. The tandem version enables the use of two material containers within a correspondingly designed transfer system.

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Iedezrdg Nepfx Acloif Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Isdpfx Acjzb Il Nsljif Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Model DC850 SS Winkworth Double Cone Mixer Machine No. 5016 For gentle (low shear) blending of dry powders and granules. Stainless steel construction with polished internals. Iisdpfozvgm Tjx Aclof Conical shape ensures complete discharge of mixer. Total Volume - 1385 litre Max Working Volume - 850 litre Driven through gear and pinion by 7.5 kW motor with David Brown Radicon gearbox. Control Panel Approximate overall dimensions of mixer on support frame - 2300 mm long x 1750 mm wide x 2400 mm high. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Isdpexln Iwjfx Acleif Video available.

Condition: excellent (used), For sale: high-quality hydraulic pump from the renowned manufacturer Rexroth Hydraulics (Bosch Rexroth) – a proven and respected producer of power hydraulics components. PGH series pump (Eckerle system) – noted for quiet operation and high efficiency, used in industrial machinery, hydraulic systems, and automation technology. 📌 Specifications: Manufacturer: Rexroth Hydraulics Model: PGH5-21/063RE11VU2 Type: internal gear hydraulic pump System: Eckerle Condition: used, very good visual condition ✔️ Technical condition: Pump rotates freely without sticking. Pressure testing not possible. 📦 Applications: industrial machinery hydraulic systems presses, production lines hydraulic power units Iedeywpazspfx Acloif

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Iiodpoxwl N Ajfx Aclsf Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Iiodozp Nknjpfx Aclof Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Ijdpfet Hww Djx Acleif Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 325 mm, spindle bore: 83 mm, turning length: 2,000 mm, turning diameter: 570 mm, total length: 3,950 mm, total width: 1,900 mm, workpiece weight (max.): 1,600 kg, overall weight: 4,300 kg, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, Selling a used Weiler E55 lathe with a 2m center distance. Year of manufacture: 2006 Control system: Weiler cycle control D3 Iijdpfx Ajztathoclef Technical data: Center distance: 2000mm Center height: 280mm Swinging diameter over bed: 570mm Swinging diameter over cross slide: 325mm Spindle bore: 83mm Spindle speed: 1-2500 rpm 2 gear stages Tailstock internal taper of the quill: MK5 Quill travel: 200mm The cross slide in the Z-axis was replaced in 2025. The machine is powered and can be inspected and tested. Accessories: Capto tool holder Coolant pump Chip tray Machine feet 3-jaw chuck Lynette Documentation

Condition: used, Max. pitch dia. 250 mm (external spur) Max. pitch dia. 178 mm ((external helical) Max. pitch dia. 153 mm (Internal spur or helical) Iedoy Anwiepfx Acleif Max. face width 51 mm Max. helix angle 45 deg No of speed/range 156-515 strokes /min Cutting feed pr/stroke 0,006-0,0013 Equipped with: Various change gears

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: Iodpfxsxwl Tzo Acljif - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, mileage: 185,286 km, power: 302 kW (410.61 HP), first registration: 12/2019, fuel type: diesel, overall weight: 38,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Internal vehicle number: G400210 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Mercedes-Benz Arocs 4451 8x4 Concrete Pump Sermac 5RZ51 | 51 m | Euro 6 For sale: a used Mercedes-Benz Arocs 4451 8x4 concrete pump with a Sermac 5RZ51 superstructure, manufactured in 2019. The concrete pump has 3,232 operating hours, a theoretical delivery rate of 194 m³/h, and a theoretical concrete pressure of 80 bar. This German vehicle is equipped with an automatic transmission, air conditioning, and a 51-meter distributor boom. Vehicle specifications: * Manufacturer/Model: Mercedes-Benz Arocs 4451 * Vehicle Type: Concrete Pump * First Registration: 12/2019 * Year of Manufacture: 2019 * Mileage: 185,286 km * Concrete Pump Operating Hours: 3,232 hrs * Power (according to vehicle data): 510 hp * Engine Displacement: 12,809 cm³ * Cylinders: 6 * Fuel: Diesel * Transmission: Automatic * Emission Standard: Euro 6 * Environmental Badge: 4 (Green) * Number of Axles: 4 * Wheel Arrangement: 8x4 * Permissible Total Weight: 38,000 kg * Unladen Weight: 37,720 kg * Payload: 280 kg * Air Conditioning * Color: White * Technical Inspection: New * Vehicle Number: G400210 * Condition: Used * German Vehicle Concrete Pump Specifications: * Manufacturer: Sermac * Model: 5RZ51 * Boom Length: 51 m * Type: AG9L10-194-80 * Year of Manufacture: 2019 * Serial Number: 9574 * Operating Hours: 3,232 hrs Iisdpfxjzri D Hj Aclof * Theoretical Delivery Rate: 194 m³/h * Theoretical Concrete Pressure: 80 bar * Pump Outlet Diameter: 180 mm * Hydraulic Oil Working Pressure: 390 bar Inspection possible by prior appointment. Further information, photos and videos available upon request. Subject to errors, changes and prior sale. Financing example: * Internal Number: G400210 * Purchase Price: €279,900.00 * Down Payment:

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm Iijdpfswqr Twsx Aclsf - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: used, Year of construction: 2009, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm max. workpiece diameter 1500 mm Control Siemens 840 D table diameter 900 mm Table hole Diameter / depth 320 / 520 mm max. table load 95 kN coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm work-spindle diameter 125 mm tool taper SK 45 DIN Table rpm 12 1/min power requirement 30 kW weight of the machine ca. 24 t dimensions of the machine ca. 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: Iiodey Dvl Ropfx Aclef - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 300 mm - Max. broaching wheel speed: 25 rpm - Cutting speed: 5 ... 50 m/min Equipment/Accessories: - Column lateral adjustment: +/-60 mm - Cutter holder mount: SK 45 DIN

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. Iodpfx Aozug Dcecloif • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Iodpfx Aszhn Rqsclsif Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Iisdpfxswfg E Do Aclef

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Isdey Hl Nkspfx Acloif

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Isdpfjrt Uy Nox Acljif Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Iiodeh Inqijpfx Aclsf Complete Stainless Steel

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. Iisdpfxozr N H Uj Aclsf • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm Iiodpjwzyp Iofx Aclof --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Iiedpfx Acoxaqa Sslef Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg