Used Ionizing Pistol for sale (103)

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Pneumatic expandable unwinder and rewinder Redpfx Aewwg N Tjgljn Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: used, functionality: fully functional, Agilent 6210 G3258A, G1969A Time of Flight Liquid Chromatograph Mass Spectrometer LC/MSD TOF. The Agilent TOF is an orthogonal-axis time-of-flight mass spectrometer (oa-TOF). That is, the ions reaching the time-of-flight chamber are impelled in a direction perpendicular to their original path. You can set up an Agilent time-of-flight mass spectrometer system (TOF) in several configurations: -For normal flow LC/MS with a binary pump, quaternary pump, well-plate sampler (or autosampler) and ESI , APCI, APPI or MMI ion sources -For microflow LC/MS with a capillary pump, micro well-plate sampler and ESI, APCI or MMI ion source Rjdpjt Ui N Ujfx Aglon -For nanoflow LC/MS with a nanopump, micro well-plate sampler and nanospray source or dual nanospray source -TOF system with an AP-MALDI source Each system has advantages for drug discovery — high throughput sample screening with highly sensitive detection and accurate mass assignment. Features: ESI – Electrospray Ionization APCI – Atmospheric Pressure Chemical Ionization APPI – Atmospheric Pressure Photo Ionization MALDI – Matrix-Assisted Laser Desorption Ionization MMI – Multimode Ionization Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 6890GC Autosampler + Software. Agilent 6890 offers a complete selection of inlets: split/splitless, purged-packed, cool on-column, PTV, and volatiles interface A wide selection of the most sensitive detectors including flame ionization (FID), thermal conductivity (TCD), NPD, micro-ECD, MSD. Equipped with Electronic Pneumatics Control (EPC) feature The Agilent 6890 series GC (Gas Chromatography system) sometime referred to as the HP 6890. It is considered as one of the best Gas Chromatograph (GC) systems today which produces excellent results for various research laboratory applications including hydrocarbon processing, food safety, pesticide determination, chemical analysis, biodiesel, drug screening, toxicology, environmental and law enforcement. The Agilent 6890 has on-board sensors that automatically compensate for ambient temperature changes and barometric pressure differences. These sensors allow for more accurate and reproducible results. The EPC feature of the Agilent 6890 GC series improves laboratory productivity and reduces recalibration frequency. Each EPC unit is optimized for intended use. Overall thermal performance of the Agilent 6890 GC provides optimal chromatography including peak symmetry and retention index accuracy while delivering fast results. The Agilent 6890 GC is capable of producing accurate temperature readings with outstanding retention time repeatability, which is the basis for all chromatographic measurement. Good working condition. Please check out our other listings as well. Rodpfxeuax Tlj Aglen

Condition: excellent (used), Year of construction: 2017, SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Year: 2017 Production Capacity: Up to 12,000 bottles/hour Container Types: • 0.33 L glass bottles (long neck and champagne type) • 0.75 L glass bottles (champagne type) Supported Caps: • Crown Ø26 mm on 0.33 L long neck bottles • Crown Ø29 mm on 0.33 L champagne-type bottles • Crown Ø29 mm on 0.75 L champagne-type bottles Labeling: • Self-adhesive front and back labels for 0.33 L long neck bottles • Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: • 12,000 bottles/hour without orientation Rodpfx Ajwnybqjglsn • 11,000 bottles/hour with orientation Operations: • PLC + touch-screen panel for control • Automatic speed adjustment via inverter and sensors • Status indicator column light Main Components: • 4 self-adhesive labeling stations • Optical fiber system for bottle orientation • Photoelectric sensors for transparent labels • Label ionizer to eliminate static charges • No-Stop labeling system (label change without stopping production) Safety and Structure: • CE-compliant safety guards with protective doors • Plate rotation with servo motors and encoders • Electrical cabinet in AISI 304 stainless steel CFT MONOBLOCK COMPOSED OF: • Fixed nozzle rinser, single treatment, 30 grippers • Isobaric filler with 30 valves • Crown capper with 6 heads • Pitch between valves: 113 mm • Supported bottle diameters: 50 - 98 mm • Supported bottle heights: 125 - 365 mm • Production Capacity: 12,000 bph on glass bottles Filling Features: • Servo-controlled valves for electronic filling phase management • MasterTronic system for automatic regulation of filling phases (pre-evacuation, filling, decompression) • CIP/SIP system for sanitization with automatic dummy bottles Crown Capper • Suitable for Ø26 mm and Ø29 mm crown caps • Centrifugal cap feeder with cap presence sensor • Pick & Place device for cap transfer • Pressure heads with magnetic pickup AUTOMATIC QUALITY CONTROL INSPECTOR Checks Performed: • Minimum and maximum filling level (with foam compensation) • Cap presence via photoelectric sensor • Label presence with dedicated sensors • Automatic ejection of non-compliant bottles Software Features: • Real-time visualization of filling and production statistics • Storage for up to 60 bottle formats • MODBUS connection for remote data management INKJET CODER • Printing of codes on bottles and labels • Support for different types of ink CAP ELEVATOR

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the machine: Fast and flexible 5-axis simultaneous milling machine, in excellent condition. Fully equipped! Suitable for connection to automation systems! Technical specifications: - Control unit: Heidenhain ITNC 530 - Travel (X, Y, Z axes): 500/450/400 mm - Travel (B, C axes): 161.955/360° - Clamping surface, rotary table: 500 x 380 mm - Rapid traverse: X - 80 m/min, Y - 50 m/min, Z - 50 m/min, B - 40 rpm, C - 50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Prepared for automation integration Accessories: - Internal coolant system with belt filter - Work area rinsing system - Heidenhain TS 649 probe - Coolant/air blast selection via M-code - Oil mist extraction unit - Rinsing pistol - Chip conveyor - Hand-held control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight: approx. 6,500 kg Inspection and test run under power at our facility is, of course, possible. We are also pleased to offer transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. Rodpfxjx Hwhrj Aglen We are there for you! From machine purchase, transport, and installation, through to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: ready for operation (used), BJZ NTM 300 SL Depaneling Machine Equipped with PC, Matrix-2000, ionization fans, and LED lighting. Maximum separation length: 300 mm Weight: approx. 110 kg Operating pressure: 6 bar Space requirements: 1250 mm x 900 mm x 2150 mm (W x D x H) Redjxgda Sepfx Aglen Weight: approx. 336 kg You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be prepared, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and also view our other offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and remain reserved.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ €1750 EX. VAT (transport costs on request) ►►Buy It Now◄◄ This product is only sold outside Europe. ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Redpfxjc Utdrj Aglsn ✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments. This paint gun set is designed with stronger and more stable structure. ✨Works with any powder: Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder. ✨Optimal ergonomics: The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating. ✨Regardless of the conditions: No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment. ✨These devices can take a beating... Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment. All equipment is new, not used. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ☀️ 2 YEAR WARRANTY ☀️ *This product is only sold outside Europe.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) Rsdpfox Hh R Rex Aglen This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs • Precise dosing of heated silica gel • Thermal and anti-static control • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table • Complete VARPE V2000 checkweigher with rejection system • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, year of last overhaul: 2025, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Rsdpfxext Dk Rj Aglen Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 700 mm, total height: 1,135 mm, warranty duration: 12 months, power: 2 kW (2.72 HP), DGUV certified until: 12/2027, Universal Dosing Machine Model: U-Max Dosing with time and speed control Stainless steel construction Hopper capacity: 40 l Various accessories available Suitable for a wide range of fill materials such as pralines, jams, confectionery creams, honey, yogurt, creamy butters of both vegetable and animal origin, cream cheese masses, whipped cream, and even mixtures containing cut ingredients (herbs, nuts, olives, etc.). Dosing pistol with hose Including nozzle set: 12 pieces per set, single needle, flat nozzle 180-190 mm Connection: 230 V Dimensions: 700 x 870 x 1130 mm (W x D x H) New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Double needle Flat nozzle in special sizes Foot pedal LCD display Rsdpfxsw S Sm Sj Aglsn Dosing programs Custom fabrication Maintenance contract Service package Delivery service Commissioning & training Visit our large machinery exhibition!

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment Rodpfxsgr Er So Agljn spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: new, Year of construction: 2025, The NQ50 is an efficient and precise horizontal machining center. It is suitable for machining a variety of materials and components in the automotive industry, tool and die making, and the IT sector. To meet production requirements regarding high precision, efficiency, and speed, an automated production line can be configured. The design concept of standardization, modularization, and universality provides the machine tool with outstanding technological advancement and future-proofing, offering excellent value for money. Features: - Compact structure with a small footprint - High rigidity, excellent dynamic characteristics, and superior precision retention - High-performance spindle for improved cutting capability and machining accuracy - Grease lubrication system for energy efficiency and environmental compatibility - Integrated automation interfaces - Cooling of the hollow ball screw on all three axes ensures high stability in serial parts production Travels: - X-axis travel: 730 mm - Y-axis travel: 730 mm - Z-axis travel: 800 mm - Control: FANUC 0i - Spindle center–table surface: 80 – 810 mm - Spindle nose–table: 70 – 870 mm Table: - Table size: 500 x 500 mm - Max. workpiece weight: 500 kg - Pallet indexing: 1° x 360° - Pallet changer system: Rotary design - Number of pallets: 2 - Pallet change time: 1.4 sec Spindle: - Spindle type: Built-in spindle - Max. speed: 12,000 rpm - Spindle power: 18.5/37 kW - Spindle torque: 95.5/250 Nm - Spindle taper: BT40 - Pull stud: P40T-I-MAS403 Feed Drives: - Rapid traverse X/Y/Z: 60 m/min - Cutting feed X/Y/Z: 60 m/min Rodpfxow Rpgyj Aglon Tool Magazine: - Capacity: 40 tools - Pull stud: P40T-I-MAS403 - Max. tool diameter: 80 mm - Max. tool diameter (adjacent slots free): 160 mm - Max. tool length: 500 mm - Max. tool weight: 12 kg - Tool-to-tool indexing: 1.5 sec Other Specifications: - Power supply: 45 kVA - Machine weight: 13 t - Installation area (LxWxH): 6450x3150x3250 mm Standard Configurations: - FANUC 0i control - 40-position tool changer (NQ80 60T) - 1° pallet indexing (except HQ100D) - NC rotary table 0.001° (NQ100D) - 40-tool changer - APC automatic pallet changer - Pneumatic and hydraulic lubrication system - Spindle oil cooler - Spindle blow-out system - Coolant system - Ball screw oil cooling - Guideway protection - Chip conveyor, chain type - Three-color signal tower, work light - Automatic shutdown - Self-diagnosis system - Full enclosure - Standard accessories: - Tool box - CE Options: - SIEMENS 828D control - 0.001° pallet indexing (standard on NQ100D) - T-slot table - CTS (coolant through spindle) pressure boost 20/30/70 bar - Control cabinet air conditioning unit - Linear scales - Workpiece measurement - Air blow pistol - Niagara rinsing

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe Redjidi Ivspfx Agljn - Brush unit - Ionization

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min Rodpfsff Huwsx Aglon • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints Redsumvu Ujpfx Agljn - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz/ 60 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm Rodpjvrg S Sofx Agljn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm Rodpfxevrfv As Aglsn -Post-filter (knitted stainless steel) 500x370x20mm

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Rjdpjlccvmefx Agljn Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: like new (used), Year of construction: 2022, operating hours: 13,394 h, functionality: fully functional, Battery-powered high-performance sweeping/scrubbing machine Scrub and sweep in one pass: with the M17 battery-powered ride-on scrubber-dryer from Tennant® Without chemicals, but with ec-H2O™ technology and ionized water: This is how you clean floors economically and environmentally consciously with the Tennant® M17 ride-on scrubber-dryer. In addition to the environmentally friendly cleaning technology, you benefit from the ease of use of the cleaning machine - whether in use or during maintenance. Conveniently inspect suction feet, brushes and filters via tool-free access points. The double side sweeping brushes also enlarge the cleaning path and ensure highly productive sweeping and scrubbing. The Touch-n-Go™ control panel integrated in the steering wheel enables intuitive 1-hand operation. This allows the driver to keep both hands on the steering wheel and steer the industrial scrubber-drier safely. The chemical-free ec-H2O™ technology effectively removes dirt and leaves floors without chemical residue. This improves traction and prevents slipping accidents when cleaning with the Tennant® M17 ride-on scrubber-dryer. With 2,500 psi high-pressure cleaner for removing coarse dirt Area of application: Industry Voltage: 36 V Battery voltage: 36 V/per unit Charger: external Direction of travel: Reverse, forward Dirty water tank capacity: 346 l Working width: 1220 mm Brush speed: 500 rpm Brush motor power: 1125 W Automatic brush switch-off: yes Number of wheels: 3 Wheel width: 127 mm Operator cockpit: yes Suction foot width: 1245 mm Body color: green Width: 1370 mm Drive: Battery Brush material: Polypropylene (PP) Rim material: Iron Sweeping width side brushes: 785 mm Sweeping width without side brushes: 915 mm Sweeping capacity with 2 side brushes theoretical: 17560 m²/h Rodpfev Hqh Hjx Aglsn Sweeper type: Ride-on sweeper Number of sweeping blades: 1 Power transmission: V-belt Steering wheel material: PU foam Length: 2850 mm Castors Material: Polypropylene (PP), nylon, polyester Dirt container volume: 45 l Side brushes foldable: yes UVP: 120.307 € Technical features Sweeping rollers + side brushes Height-adjustable: depending on brush pressure Practical area coverage: 10,310 sqm incl. Ech2o Climbing ability: transport (empty) 20%, transport gross weight 13%, working mode 11% Consumption: Runtime 2.9 hours Operation: Battery Battery type: Lead-acid battery Battery capacity: 775 Ah/per unit Driving speed: 5 - 9 km/h Noise level in dB(A): 75 dB(A) Fresh water tank capacity: 285 l Theoretical area coverage: 17560 m²/h Brush diameter: 230 mm Brush contact pressure: 250 kg Tire material: Polyurethane (PU) Non-marking wheels: yes Wheel diameter: 381 mm Suction lip material: Linatex Suction motor power: 1200 W Frame color: grey Height: 1480 mm Own weight: 2165 kg Number of batteries: 1 Weight without battery: 1515 kg Filter area: 51000 cm² Sweeping width with 2 side brushes: 1700 mm Sweeping capacity with 2 side brushes practical: 10310 m²/h Sweeper filter cleaning: electric Sweeping principle: Direct sweeping system Body material: ABS plastic Running time: 6.5 h Number of swivel castors: 1 Reverse gear: yes Number of side brushes: 2 Seat material: Plastic Turning radius: 3003 mm Year of construction: 2022 Product video M17 brochure You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 8520-7-10558-FA, measuring range X-axis: 2,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 2,500 mm, Equipment: documentation/manual, Purchased brand new in 2023 for a project but no longer required. Only used for a number of hours - approx 50hrs. Tripod Table / Machine mounting ring Carry case Includes Dell Mobile Precision Workstation 7780 (Laptop of value £4,486.00) with PC DMIS 7-Axis Arm with 2.5 m Measurement Volume, Includes: • Absolute Encoders and SMART Sensors • Zero-G Counterbalance with SmartLock and HomeDock • Wrist Display • Haptic Feedback • Bluetooth wireless interface for wireless accessories • Spin Knob and Spin Grip • Base Plate with Mounting Ring • TESA TKJ Ball Probes: 3 mm Ruby / 6 mm Ruby / 15 mm Steel Rsdpfxswhwdps Aglon • Certified Length Standard • RDS Maintenance and Interface Software • Travel Case and Accessory Case • Power supply • Hexagon Dust Cover • ISO 10360-12 Certificate Removable Pistol Grip for Probing in Standard Mode (with Pistol Grip) or in Compact Mode (without Pistol Grip) Includes: • Nose Cone • 3 sizes of Pistol Grip Handles: Small / Medium / Large • The medium size grip is mounted on to Pistol Grip main body • Certified Sphere for Probing Wireless Pack (CP-W) shipped fully configured and mounted on t he arm. The CP-W provides: • Single Ethernet connection for all touch probes, tube probes and scanners (HP-L-8.9, HP-C-V3D, AS1, RS6, RS5 and RSSQUARED) • Wireless connections for all touch probes, tube probes, AS1, RS6, RS5 and RS-SQUARED. (HP-L-8.9 and HP-C-V3D do not support wireless connections). • One Ethernet to USB adapter, for users who prefer a USB connection to Ethernet • Battery operation available (with hot-swappable batteries) Includes: • Wireless Pack CP-W • ODU-Ethernet Cable - 3m • Ethernet Gigabit adapter • Two rechargeable batteries Note: CP-W is certified to IP54 when mounted on the arm MST138 Portable Precision Carbon Tripod Precision carbon tripod for Absolute Tracker AT930/960, ATS600 or Absolute Arm. The MST138 has the following features: - Foldable tripod with carbon legs - Height scale on center leg - 3x integrated fixed positions for AT Controller/ATS Controller or external batteries MPB25/MPB100 - 3.5x8’’ thread to mount Absolute Tracker AT930/AT960, ATS600 or Absolute Arm - Adjustable height: 79 cm – 131 cm (31.1’’ – 51.6’’) - Weight: 13.5 kg (29.8 lbs) Compatibility: AT930, AT960, ATS600, AT403 TM6100A with MSI140 adaptor

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles Rodjdz Spwspfx Aglsn - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Max. usable height: 450 mm Max. load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Constructed entirely of stainless steel Thermal and sound insulation External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical connected load: 15 kW Including: - Automatic pneumatic goods lift Redpfxsxuzyfs Aglen - Surface rinsing/oil separator for bath maintenance - Ultrasonic immersion transducer with two-sided sonication - Power: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower Redpfxjxtpydo Aglsn 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Please contact Kristoff Van Havere for more information - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg Rjdpfew Thkcsx Aglsn - 220 liter: 620€ net - 430 liter: 788€ net

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Rjdpfx Ajxq Exqsglon