Used Ionizing Pistol for sale (106)

Condition: good (used), Year of construction: 2013, Ionizing Air Blower Haug Ion-Air Blower Manufacturer: Haug GmbH & Co. KG Model: Ion-Air Blower Type: Ion-Air blower Id. 04.0361.000 Serial number: 13889018 Year of manufacture: 2013 Protection class: IP40 Primary voltage: 230 V Frequency: 50–60 Hz Power consumption: 70 VA CE marking: available Function: Neutralization of electrostatic charge using ionized airflow Field of application: Plastics processing, injection molding machinery, packaging and automation lines Podpfx Aeytqkrjb Usgi

Condition: good (used), Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. Pgedpfx Abob A Rxus Usi -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg

Condition: ready for operation (used), A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible. Pgjdsw R U Agspfx Ab Uoi

Condition: used, 48EPE150D4, Cleco, pistol screwdriver Psdpfx Ajvrggceb Uogi Model: 48EPE150D4 Condition: Used

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Pgodpfov Im Ncex Ab Uoi Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Podpfov Imyusx Ab Ujgi Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Pgedpfeb Dxnwex Ab Uoi Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: used, 2 component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dosing gun, 2K mixing gun -Manufacturer: Plunger, double cartridge dispensing gun Mixpac Strap Kit Pedpfxou Aigks Ab Usgi -Number: 2x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: used, Entionisierung – Entladenetzteil / Deionization – Discharge power HAUG EN-8 Baujahr / Year 2004 - Serial-No. 933594/40 2 Stäbe, Länge jeweils 70cm lang / 2 Rods length each Rod 70 cm long Pgedpfx Aoxlri Seb Uji zum Entfernen elektrostatischer Ladungen /  for removing electrostatic charges Funktionsprinzip Die anliegende Netzspannung wird durch einen Hochspannungstransformator auf 7–8 kV Wechselspannung transformiert. Die im Sekundärbereich integrierte Funktionsüberwachung meldet die Unterschreitung der Koronaeinsatzspannung (= Wirkungsbeginn von Ionisationsgeräten) durch Blinken der Kontroll-LED. Operating principle The applied mains voltage is transformed to 7-8 kV AC voltage by a high-voltage transformer. The function monitor integrated in the secondary section signals that the corona inception voltage has been undershot (= start of effect of ionizing units) by flashing the control LED. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), VE-water circulation system for the treatment of rinsing baths Psdexvllnjpfx Ab Uegi

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Pedpfxowy Uu Ao Ab Usgi • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Podpfxjw Iqumj Ab Uogi Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Pjdpfxext Dk Rj Ab Uegi Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2016 Control : Siemens 828D - ShopTurn Turning diam. : 500 mm Turning length : 520 mm Mainspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):22 kW Torque (max.):305 Nm Barcapacity:65 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok 210 BB Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Podpfxsyxuhyo Ab Usgi Taper:VDI 30 Tooldrive:5.000 rpm, 5 kW, 20 Nm Movement in X/Y/Z:260/80/610 mm Rapid travers in X/Y/Z:30/15/30 m/min Tailstock: Technology:Hydraulic driven Tailstockforce (max.):8.000 N Stroke:500 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chiptray Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Interface Barloader prepared Finishedpartremoval:Partscatcher with conveyor belt Toolholder:Misc. used static and driven tools Further Equipment:Rinsing pistol

Condition: good (used), Year of construction: 2013, 1 used 5-axis (3+2) universal machining center Make: DMG Mori Model: DMU 50 Year of manufacture: 2013 Technical specifications: X-travel: 500 mm y-travel: 450 mm z-travel: 400 mm C-axis: 360° Pedpfoywfc Sex Ab Uogi B-axis (table -50 / +110° mm Spindle speed: 10,000 rpm Spindle mount: ISO 40 DIN 69871 Control: Heidenhain TNC 620 Total power requirement: 13 / 9 kW Machine weight: approx. 4.5 t Space requirement: approx. 6 x 3 x 3 m Additional information Options: - 30-slot magazine with double gripper - Production package with high-pressure coolant and scraper-belt conveyor - 360 L coolant tank - Air blast - Coolant pistol - Electronic handwheel - HEIDENHAIN TS 649 infrared touch probe - Direct measuring system New motor spindle in 2022 ATTENTION: The machine is sold without the clamping system shown in the photos!!

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Podpfx Absyvgf Ds Uogi Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 32i-B5, _____ Description: Year of manuf. : 2015 Control : Fanuc 32i-B5 Turning diam. : 552 mm Turning length : 765 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Bar capacity:100 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix BI-SP08F100 Subspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix 65 Movement in B:895 mm Rapid travers in B:30 m/min Pgodpfxoyul E Tj Ab Uji Toolcarrier (X/Y/Z): Technology:Turret with 16 stations Taper:BMT65 Tooldive:10.000 rpm, 17,5 kW, 56 Nm Movement in X/Y/Z:305/140/860 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Filter and Highpressure, 20bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 Rawmaterialfeed:Barloader, Breuning-Irco MUK 10016 II Finsihedpartremoval:Part catcher with conveyor belt Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used static and driven toolholder Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2018, controller manufacturer: Fanuc, controller model: 31i-B5, _____ Description: Year of manuf. : 2018 Control : Fanuc 31i-B5 Turning diam. : 500 mm Turning length : 1280 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:94 mm Workpiececlampig:3-Jawchuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):40 kW Torque (max.):286 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok HFK-N-210-52-3 Movement in W:1.130 mm Toolcarrier (X/Y/Z/B): Pgedeyul E Hopfx Ab Usi Technology:Travelling column with millingspindle Speed:10.000 rpm Power (max.):20 kW Torque (max.):110 Nm Taper:HSK-A63 Swivelrange in B:+/- 105° In general: Toolmagazine:Chainmagazine, 40 Stations Movement in X/Y/Z:515/210/1.360 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolantmanagement:Internal coolant unit with Paperbeltfilter and Highpressure, 70 bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 :Rawmaterialfeeed. Interface Barloader prepared Finished part removal:Interface Partscatcher prepared Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used Toolholder HSK-A63 Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 32i-B5, _____ Description: Year of manuf. : 2015 Control : Fanuc 32i-B5 Turning diam. : 552 mm Turning length : 765 mm Mainspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Bar capacity:70 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.500 rpm Power (max.):40 kW Torque (max.):286 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok FK-N 165-46 Movement in B:895 mm Rapid travers in B:30 m/min Toolcarrier (X/Y/Z): Technology:Turret with 16 stations Taper:BMT65 Tooldive:10.000 rpm, 17,5 kW, 56 Nm Movement in X/Y/Z:305/140/860 mm Rapid travers in X/Y/Z:18/18/30 m/min Pgsdsyul Easpfx Ab Uei Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Filter and Highpressure, 20bar Toolmeasurement:Automatic Measuringarm, Renishaw RP3 Automation:Gantryloadersystem, Frai Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used static and driven toolholder Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2013, controller manufacturer: Fanuc, controller model: 31i-B5, _____ Description: Year of manuf. : 2013 Control : Fanuc 31i-B5 Turning diam. : 500 mm Turning length : 1280 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:94 mm Workpiececlampig:3-Jawchuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):40 kW Torque (max.):286 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 210BB Movement in W:1.130 mm Toolcarrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:10.000 rpm Power (max.):20 kW Torque (max.):110 Nm Taper:HSK-A63 Swivelrange in B:+/- 105° Pgjdpfx Abeyul Dio Usi In general: Toolmagazine:Chainmagazine, 40 Stations Movement in X/Y/Z:515/210/1.360 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolantmanagement:Internal coolant pump with Filter and High-pressure, 20 bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 Rawmaterialfeeed:Barloader, Breuning Irco ILS-RBK 10016 Finished part removal:Interface Partscatcher prepared Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used Toolholder HSK-A63 Further Equipment:Rinsing pistol

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. Pgodpsyaa Utofx Ab Uoi The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine is equipped with a Heidenhain iTNC 530 control system and a tool changer that holds 30 tools. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 560 mm • Linear measuring system: Heidenhain X/Y/Z • Through-spindle coolant and air • Internal coolant supply: 20 bar • Coolant pump controlled via M-functions • Connectivity: network and USB • Enclosure: polycarbonate safety enclosure; side windows left and right with hinges • Status signal light • Hours: 610 h Additional equipment • Chip conveyor, hinged-belt type (external) Psdpfxoyrq Hkj Ab Usgi • Chip flushing system (M-function controlled) • Coolant belt filter system • Oil/coolant separator, electromechanical • Electrical cabinet cooler, air-to-air • Mobile electronic handwheel • Air pistol • Water pistol Technical Specification Taper Size ISO 40

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 02/2026, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Pgjdpfxsyw Dxxs Ab Uei

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved! Pgsdpfxsxgnz Te Ab Uei

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control Pgsdpfx Aboywuqre Uei 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min