Used Knives for sale (1,270)

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Ljdezudfdepfx Afujrt Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Lsdpfx Aezul Sfsfuort

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Lrodpfx Aez D Ad Iefujt Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 26 kW (35.35 HP), overall weight: 900 kg, fuel type: diesel, color: red, axle configuration: 1 axle, empty load weight: 900 kg, fuel: diesel, Equipment: trailer coupling, === KEY SPECIFICATIONS === Year: 2013 Machine type: Mobile wood chipper Maximum wood diameter: 160 mm Feed opening: 160 x 221 mm Chipping principle: Disc system Feed rollers: 2 horizontal feed rollers Chip length: 4–10 mm Capacity: Up to 8 m³/h Engine: Lombardini diesel Lsdpfezrfixsx Afuert Engine power: 26 kW / 35 hp Operating weight: 900 kg Dimensions: 3573 x 1416 x 2440 mm CE certification: Yes === EQUIPMENT & FEATURES === TP PILOT No-Stress system TP STARTER automatic coupling system Hydraulic feed roller speed control Two cutting blades Horizontal and vertical counter knives Single-axle mobile trailer Overrun braking system Galvanized stabilizer leg Adjustable discharge chute === CONDITION === Used condition with visible signs of professional use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. Inspection and operational testing are possible by appointment. === DESCRIPTION === 2013 TP TP 160 Mobile diesel wood chipper designed for processing branches and green waste up to 160 mm in diameter. Equipped with two horizontal hydraulic feed rollers, a disc chipping system, TP PILOT No-Stress control and an adjustable chip length from 4 to 10 mm. The single-axle mobile trailer configuration makes the machine suitable for forestry, landscaping, groundcare and vegetation management applications. === PRICE, LOCATION & DELIVERY === Price: €12,500 Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart processing turbine, including accessories, and offer a repair service upon request. This is a processing turbine from the premium manufacturer Hobart, type PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideal for use with vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and ease of use guarantee fast and cost-effective operation, even in confined spaces. The machine is equipped, as can be seen in the photo of the processing head, with the PVM 302 sieve insert with 4 mm holes. The PVM 302 has an integrated safety device that prevents automatic restart after a power failure or power cut. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely refurbished in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / sliding ring seals / various ball bearings / 1 set of horizontal knives. The processing turbine is now in excellent technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The fine sieve insert is included, as well as a grease gun for regular maintenance. See photos! Lodpjzzw Ilefx Afuert Manufacturer's list price = €32,945 NET The machine is available immediately. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Dimensions: in operation L x W x H = 1350 x 550 x 1500 mm in rest L x W x H = 1100 x 550 x 1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of construction: 2003 Condition: Used, refurbished, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Machine with high-performance turbine and vertical and horizontal knife set; good chopping and pureeing performance. Turbine with intake protection ring. Power transmission via flexible shaft. The machine bears the GS/CE mark. Motor: Special motor, ball-bearing mounted, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. Gear 725 rpm (slow speed). II. Gear 1450 rpm (fast speed). Motor with fan cooling, protection class IP 54. Total connection value: 1.85 kW three-phase 400V/50/3 Fuse protection: 3 x 10 amps.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Ljdpoy Rimzofx Afuort Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) Lrsdpszp Nz Tjfx Afuet ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, spindle diameter: 50 mm, type of input current: three-phase, input voltage: 400 V, number of spindles: 9, input frequency: 50 Hz, input current: 184 A, WEINIG Hydromat 23 - 9 heads, refurbished in 2020 Opre Annamária: Oh +36 20 949 4988: For sale: a WEINIG Hydromat 23, one of the most reliable machines for professional woodworking. The machine underwent a complete overhaul in 2020 at a German specialist service center and has been operating flawlessly ever since. Technical specifications: - 8 + 1 universal heads, total 74.5 kW (lower 11 kW, upper 11 kW, the remaining heads 7.5 kW, including one universal head) - Working width: 230 mm - Working height: 160 mm - Tool/spindle diameter: 50 mm - Year of manufacture: 2000, complete overhaul in 2020 at a German specialist service center The machine can be viewed and tested in operation by prior arrangement in Nagytarcsa, near Budapest, Hungary. Available as a separate option: with many planing heads, planing knives, accessories, and a dust extraction system. Price: 59,000 EUR Ledpfx Afsztpgwsuort

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Lsdpfxswma N Ss Afusrt Space required (height) : 1.8 m

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Lrsdpfszl E Stsx Afust The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed Ljdszz Nh Dspfx Afujrt

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control Lrodoz Ea Itspfx Afuet • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device Lrsdpfx Afoz Eaq Ieuet - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 1995, Combined surfacing and thicknessing planer from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, very robust construction in a compact design. Special feature of this machine: The surfacing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620 mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel Grooved steel infeed roller Rubberized outfeed roller, new Planing height approx. 4 - 240 mm 2 feed speeds 7 + 14 m/min Table length 2520 mm Drive motor 5.5 kW with automatic motor brake 2-knife cutterhead with spiral-shaped, re-sharpenable HSS knives Two sets of spiral knives are included, each mounted in matching pressure blocks. Re-sharpening is done by a sharpening service, and the sharpened knife sets can then be easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with guide strip Concave and pointed edge setting for the surfacing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160 mm Only a few touch-up spots V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table guide rollers Dimensions approx. 2520 x 1200 x 1200 mm (L x W x H). Weight approx. 1300 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier". Lredpfxoztkyxj Afujt

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Type: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Table lips: low-noise Motorized automatic brake Number of knives: 4 Lodpfx Ajz Alb Aofuort Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and the material being processed. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: Lsdpfx Ajznbyrsfuert PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Lodpfxoznbv He Afuort Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lrodpfx Ajww T U Nefuet Yorick Diebels

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics Lredpfx Asz Ahr Rjfujt The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 406 × 813 mm. Magnetic chuck 400 × 800 mm. Maximum table load with magnetic chuck: 500 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 350 × 40 × 127 mm. Spindle speed 1450 rpm. Lrjdpfxezr H Naj Afuet Spindle motor power 5.5 kW. Total machine power 9 kW. Surface roughness up to Ra 0.63 µm. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP40100AHD (406 x 1020 mm) - priced at €26,000.

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft pre-shredder / Rotary shear – Metal shredder – 264 kW – 1,930 hours Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: __2021__ Hours: 1,930 h Condition: Used Technical specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Blades: Bolted (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation Weight: approx. 27,500 kg Applications / materials Light scrap metal Ledpsx I Dc Ejfx Afuort Steel sheets Drums / cans Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Machine is functional Blades need to be replaced Maintenance records available Inspection and testing possible on site Terms of sale & price 🔧 Sold as is (work required) – Thread repair and blade holder surfacing, complete blade set replacement Availability: Immediate Price: €250,000 (excluding VAT)

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Lredpfx Afozz N Nneuet Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q1/2027, equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, spur gears, skiving tools, deep-hole drills, and other workpieces/components. Working area: X-axis: 630 mm Y-axis: 345 mm Z-axis: 430 mm C-axis: Rotation angle 300° X3 auxiliary axis: Working area: 400 mm Grinding spindle: Interface: HSK80 (conversion to HSK50 possible) Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution of linear axes: 0.0001 mm Rapid traverse of linear axes: 30,000 mm/min Resolution of rotary axes: 0.001° Speed of C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as spindle: 1,000 rpm Ledeyzqwcepfx Afuort Optional: 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Tailstock: optional Further accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, briefing, and training), and final acceptance at the customer's site. Financing options available upon request.

Condition: excellent (used), Year of construction: 2001, CATALOGUE NUMBER: 7089 TECHNICAL DATA - Inlet of the loading hopper: 1020x1230mm - Working width of the rotor: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen mesh: 12mm - Pressing drawer - Electric automatic reversing Lredpfxjztau Ss Afuet - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Automatic reversing – Similar to WEIMA WL 10 – German made – Pressing drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 99,900 PLN Net price: 23,233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right Lrsdpjh Itu Eofx Afuet - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request