Used Laminator for sale (787)

Condition: used, Year of construction: 2015, Laminiermaschine / Laminator GMP Eurolam IDH 540IIIYear 2015 - Serial-No. CJ00340K Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Power Consumption 12kWDie Maschine verfügt über eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle. Rsdpsq Sbp Rofx Ag Iop Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2018, Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Rsdpfx Ajmk Nc Isg Isp Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Redpfsx U A D Uex Ag Iop Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: like new (used), Year of construction: 2020, The Easymount EM-1200DH is a wide format double hot roller laminator engineered for both laminating and mounting applications. It supports hot and cold lamination, allowing you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: Rsdpfx Ajych Utsg Isp - Maximum lamination width of 1200 mm (47 inches) - Laminating speed of up to 3.9 meters per minute - Mounting thickness capability up to 25 mm (1 inch) - Variable speed settings for precise process control - Reverse mechanism for correcting lamination errors or jams - Heat-assisted rollers for consistent, high-quality results This machine is suitable for mounting wide images with sheet film and for continuous mounting with roll film, providing versatility for various print finishing requirements. It is designed to be durable and reliable for professional use in wide-format finishing environments.

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Rodpfx Aohw Emqsg Isp Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min Rjdpfxjyl Ubfe Ag Isp PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: like new (used), functionality: fully functional, Very nice laminator. Brand: Foliant, model Compressor 520A. With jogger. Automatic vacuum belt feeder and pneumatic pressure main rollers. Voltage: 230 volts. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Ask for a price including transport (location: the Netherlands). Rsdpoxxxuhefx Ag Isp Regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2011, Automatic Laminator D&K Europa System B2 The machine is 100% functional and ready for immediate use. Available for inspection in Warsaw. Technical specifications: Max. sheet size: 540 mm x 740 mm Min. sheet size: 210 mm x 220 mm Rsdpoylk Etsfx Ag Iep Minimum paper weight: 115 g/m² Maximum paper weight: 400 g/m² Working temperature: 80-145°C Weight: 750 kg Power supply: 380 V Chromed steel cylinder Pneumatic clamping, separation, and automatic high pile feeding. Sheet feeding precision: ±2.0 mm Touch panel for easy operation Sheet alignment module

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm Rsdoyh T Rujpfx Ag Iop 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The Bottero 520 LAM/46 is a CNC-controlled, tilting, automatic cutting table designed for processing laminated glass with a maximum cutting length of 4,600 mm. It features an infrared heating system for PVB cutting, high-speed blade cutting (100 m/min), and options for Low-E edge deletion. Ideal for handling large sheets, it supports glass thicknesses up to 8.8.4,56 mm. Key Technical Specifications & Features Maximum Cut Length: 4600 mm Rodpfx Agjyic R He Iep Cutting Speed: Up to 100 m/min Glass Thickness Range: Minimum 2.2 + 0.38 PVB to Maximum 8.8 + 4.56 PVB Table Dimensions: Approximately 6030 x 3900 mm Load Capacity: Up to 450 kg Functionality: Automatic cutting, breaking, and shaping with optional Low-E edge deletion System: Uses an infrared heating element to focus on the PVB layer, preventing delamination and enabling fast processing The 520 LAM/46 is designed to optimize production speed and accuracy in, for example, high-volume manufacturing environments.

Condition: used, Year of construction: 2013, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Laminating Speed: 15 mtr/min Laminating Film: OPP PET NYLON. Matt & Gloss plus special digital film Paper Thickness: 120-350 gsm Pressure Control: Pneumatic cylinder Heating System Heating System: Hot roller internal infrared heater Temperature Hot roller internal infrared heater Temperature Range 0-140 C Warm up time: 10 min Automatic Feeder Film Core: 76mm Power Requirements: 220-240V 50/60Hz Power Consumption: 2300W 10 Redpexb Dn Sofx Ag Isp 5A Weight: 240 kg Dimensions (W*D*H): 860 x 1585 x 595 mm

Condition: new, functionality: fully functional, Komfi Amiga 52 Laminator – High Automation and Industrial Precision For sale: Komfi Amiga 52, a professional thermal laminator designed for small and medium print shops with a strong focus on digital jobs and short/medium runs. This machine stands out for its high reliability, advanced automation, and excellent lamination quality, significantly reducing waste and minimizing operator intervention. Its compact and accessible design ensures maximum performance in limited spaces while maintaining ease of operation and maintenance. Ideal Applications • Book covers (hardcover and softcover) • Commercial and promotional print jobs • Lightweight packaging and folding cartons • Demanding digital work • Window laminating • Jobs with frequent changeovers Key Features • Intelligent control system with sensors for continuous monitoring • Automatic machine and material protection functions (overlap detection, sheet separation, jam prevention) • High registration accuracy and secure stop without damaging sheets • Reliable feeding at maximum speed • Modular configuration with multiple options and accessories • Easy operation with automated start-up sequences • Job memory and connectivity for remote diagnostics • Prepared for challenging substrates or problem digital prints Technical Specifications • Max. speed: 25 m/min • Max. sheet size: 560 × 800 mm (optionally up to 1016 mm) • Min. sheet size: 200 × 200 mm Redpfx Aeyi Sd Ssg Isp • Paper weight: 115 – 600 g/m² • Max. pile height: 52 cm • Heating: Single-zone IR • Warm-up time: 3–5 min • Overlap accuracy: ± 0.8 mm • Dimensions (with delivery): 2.63 × 1.00 m Standard Configuration • Single-action Komfi feeder • Air compressor and vacuum for stable feeding • Rubber-covered pressure roller • Pneumatic uniform pressure system • Adjustable reel shaft with brake • Extended anti-wrinkle roller • Automatic decurling unit • Integrated film perforator • Delivery table with air jets Available Options (Depending on Configuration) • Intelligent bottom feeder (manual or online with digital press) • Sheet preheater • Hot knife for perfect separation • Automatic jogger/table stacker • Ionizer/anti-static bar • Film slitter • Additional perforator • Foiling/effects device • Autopilot for automatic supply control Key Production Advantages ✔ High automation = reduced operator requirements ✔ Low waste and fast set-up ✔ Compatible with short runs and frequent job changes ✔ Consistent, professional quality ✔ Robust Komfi construction

Condition: used, Year of construction: 2019, Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Primary Unwinder Max roll Ø: 1000 mm | Core: 76 / 152 mm | Max weight: 1000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Secondary Unwinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Hydraulic loading, BST OPG web guide, photocell edge detection Rewinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Rsdpfx Asyiu I Tog Iop Web width: 1330 mm | Max lamination width: 1315 mm Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Adhesive Systems Single-component Monodispenser (VEA) for paper laminations Two-component solventless PU dispenser Heating belts for 200 kg adhesive drums Materials: ALU 6.35–50 μm | LDPE/LLDPE 30–200 μm | OPA 12–50 μm | PET 10–30 μm | Paper 40–200 gsm | BOPP 12–80 μm Controls & Accessories PLC Siemens Simatic DP IM 151-8F PN/DP CPU ET200S Semi-automatic roll trolley 1000 kg

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Rjdpfx Aoxbrw Ueg Iep

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Rjdpfx Agjx I Rprs Ijp

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Rodpowzx Tfsfx Ag Iop

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Rodpfx Agexdimfj Ijp Weight: 14 tons

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. Rodpjydkhfjfx Ag Iep It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Condition: good (used), Tecnomac Sprinter 76 Automatic laminating machine The most efficient machine on the market from a legendary manufacturer. It is an advanced machine with high efficiency thanks to an external heating thermostat. Production Italy. Technical data: Max sheet size: 760mm x 1040mm Min sheet size: 210mm x 210mm Min weight: 120 gsm Max grammage: 400gsm Operating temperature: 80-145°C Max working speed: 40m/min Weight: approx. 1800 kg Power supply 380V Redpfx Aeydkd Tsg Isp Additionally, air 8 Bar A steel, chrome-plated cylinder with a large diameter, filled with water for greater operational stability. Pneumatic pressure, separation and automatic feeding. Adjustable pressing force. Feeding from a high stack, Spiess type feeding head Expanding roller for attaching the foil. Sheet straightening module.

Condition: ready for operation (used), Year of construction: 2011, Connected load: 36kW, length: 2750mm, width: 2750mm, height: 2000mm, weight: 2.5t, with documentation, operating hours: 20h, an on-site inspection is possible. Rodpfjqi D Tgjx Ag Ijp

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Rsdpfeq Ixglsx Ag Isp

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Redpsi E Trpjfx Ag Isp

Condition: used, functionality: fully functional, With this offer, you are purchasing a used automatic laminator ‘Lami Revo-T14’. Item for sale: 1 x Lami Revo-T14 Redpfxoxb A N Uo Ag Iop Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2003, The Billhoefer MTS 104 is a high-performance laminating machine designed for professional print finishing. With a working size of 1045 x 1135 mm, it handles both large and small formats, supporting substrates from 150 to 450 g/sqm and foil thicknesses of 24 to 40 microns. Equipped with a flat pile feeder IA 20, suction feeder head, automatic rotary separator ITM 104, and jogger, the MTS 104 ensures smooth operation and consistent results. Its impressive speed range of 2500 to 4500 sheets per hour makes it ideal for demanding production environments. Currently located in Germany and actively used in a printshop, this machine combines reliability with versatility for a wide range of laminating applications. Format: 1045 x 1135 mm Equipment: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Redpfx Aexgm T Iog Ijp Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

Condition: used, We are selling our GMP Commercial Thermal Laminator with Belt-Feeder 35 and Protopic Plus 520. We originally purchased it for our Scodix machine, but we are not using it. Rsdpfx Agoyh Il Ho Iep