Used Length Gauge for sale (31,797)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DRIVE Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V Hjdpfx Asz R D Eusk Ujnu OPERATING DATA Operating hours according to display: 16,042 h Year of manufacture: 2018 MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 1,850 mm Overall width: 1,000 mm Overall height: 1,400 mm Unladen weight: 1,500 kg EQUIPMENT White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Service valid until: UVV (Occupational Safety and Health) valid until: Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 329

Operating hours: 1,288 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Operating hours: 1,288 h MACHINE DETAILS Manufacturer: Toyota Type: LPD200 Year of manufacture: 2020 Own weight: 850 kg Hnjdpfx Asz R D Ipek Uou Overall length: 2,000 mm Overall width: 800 mm Overall height: 850 mm EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: used, machine/vehicle number: H2X387J01952, Year of construction: 2018, operating hours: 4,940 h, load capacity: 3,000 kg, lifting height: 3,760 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,760 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: Electric Battery: 80 V, 4 PzS, 620 Ah Battery year of manufacture: 2022 Battery equipment: Aqua+EUW Battery voltage in idle state: 83.3 V Operating hours: 4,940 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,470 mm Own weight: 5,600 kg Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 Hjdpfx Ajz Nn Nnok Uonu EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Semi-cab Windshield with wiper Comfort seat Integrated charger LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear Full free lift Fork adjuster: Hydraulically adjustable Side shifter Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 67

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical Data Charging voltage: 80 V Charging current: 280 A Charger type: Modular HF charger General Data Manufacturer: Hawker Model: Life SeediQ Year of manufacture: 2019 Application: Forklifts / Electric forklifts MACHINE DETAILS Dimensions Length: 600 mm Width: 600 mm Height: 800 mm Hodpfxjz R Rizs Ak Uenu Weight Net weight: 80 kg EQUIPMENT Battery connector Wall connector All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the item is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3758

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical data Battery voltage: 48 V Charging current: 60 A Power: 3,280 W Mains connection: 220 V MACHINE DETAILS General data Manufacturer: Fronius Model: Selectiva 4.0 4060 Year of manufacture: 2022 Weight: 10 kg Dimensions Length: 300 mm Width: 300 mm Height: 300 mm EQUIPMENT REMA battery connector 220 V plug All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck on site is possible. Loading is at your own risk. Hnodpfx Aez R Rztsk Uju Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of late collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3780

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery Manufacturer: Still Type: 24 V 4 PzS 620 Ah Battery voltage: 24 V Capacity: 620 Ah Year of manufacture: 2022 MACHINE DETAILS Dimensions and weight Overall length: 800 mm Overall width: 300 mm Overall height: 800 mm Net weight: 500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Hnjdpfx Ajz R Rhqsk Uou Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1171

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Manufacturer: Fronius Model: Selectiva 4.0 4060 Output voltage: 48 V Charging current: 60 A Power: 3,280 W Mains voltage: 220 V MACHINE DETAILS Year of manufacture: 2022 Weight: 10 kg Overall length: 300 mm Overall width: 300 mm Overall height: 300 mm EQUIPMENT REMA battery connector 220 V mains plug Hjdsz R Ri Ujpfx Ak Usnu All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tons possible with a large forklift on site. Loading is done at your own risk. * Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. * A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Any outstanding storage fees must be paid in full before collection. Lot number: 3779

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Hnedpfx Aed Hx E Iok Uju Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Space requirement (length) 1170 mm Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback Hjdpsff Efasfx Ak Usnu A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, machine/vehicle number: B0508A0131, functionality: fully functional, TRU BEND 5230 – CNC Press Brake – 230 t – 4,260 mm – Year of Construction 2008 For sale is a TRUMPF TruBend 5230 CNC press brake from the year 2008. The machine has a pressing force of 230 tons, a bending length of 4,260 mm, and extensive equipment for precise and economical bending operations. Technical Data Feature | Description Manufacturer | TRUMPF Model | TruBend 5230 Year of Construction | 2008 Machine Number | B 0508 A 0131 Pressing Force | 2,300 kN / 230 t Bending Length | 4,260 mm Installation Height | 615 mm CNC Control | TASC 6000 Hodpfx Asz S Nxcek Usnu Axes | 6 axes New Price | approx. €225,000 Equipment and Accessories - CNC control TASC 6000 - 6-axis back gauge system - Standard safety devices - Cabinet air conditioning - Hydraulic upper tool clamping - CNC crowning - 2-arm bending aid (new price approx. €28,000) - TRUMPF BendGuard safety system - TRUMPF bending software TruTops Bend with TruTops CAD - Preparation for ACB (automatic angle measurement) - Optical setup and positioning aid - TRUMPF machine documentation Description The TRUMPF TruBend 5230 is a powerful CNC press brake for demanding bending operations in sheet metal processing. Thanks to the 6-axis back gauge control, the hydraulic upper tool clamping, and the CNC crowning, the machine offers high flexibility and precision. The integrated 2-arm bending aid supports the processing of large and heavy sheet metal parts. The machine is ideal for industrial sheet metal processing, steel construction, and contract manufacturing. For sale due to business closure.

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable Hodpfx Aksz S Nm To Ujnu MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hsdpjz S Nq Sjfx Ak Ujnu Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 5,400 kg, total length: 2,000 mm, Equipment: CE marking, documentation/manual, This TRUMPF TruBend 3066 press brake features a pressing force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis back gauge (X/R/Z1/Z2) and operates with a rapid traverse speed of 200 mm/s. If you are looking for high-quality bending capabilities, consider the TRUMPF TruBend 3066. • Y-axis stroke: 200 mm • X-axis stroke: 600 mm • R-axis stroke: 150 mm • Back gauge axes: X / R / Z1 / Z2 (4 axes) MOTORIZED • Pressing force: 660 kN • Bending length: 2600 mm • Usable open height: Minimum clearance 167 mm • Maximum table-to-beam distance: 347-432 mm, depending on tooling • Throat depth: Approximately 400-420 mm • Beam inclination/parallelism: ±3 mm • Y-axis rapid traverse speed: 200 mm/s Hnodpfez Sqqtsx Ak Ueu • Y-axis working speed: 15 mm/s • Y-axis return speed: up to 200 mm/s • Positioning accuracy (Y-axis): 0.01 mm • Mains power supply: 400 V / 50 Hz • Connected load: 15 kVA PNEUMATIC TOOL CLAMPING, WILA TYPE BEND GARD UNDER TRUMPF MAINTENANCE

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Hjdpfoz Sqmzjx Ak Uenu Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Hsdjynbfvjpfx Ak Usnu Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: ready for operation (used), Grundig 665RI length measuring gauge, model ML 770 mm, serial number: 78-95201, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hnsdpfji Eacwjx Ak Uou

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Hnedpozw Rv Usfx Ak Ueu Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, pressing force: 400 t, operating speed: 9 mm/s, reverse speed: 90 mm/s, table length: 4,100 mm, overall weight: 26,000 kg, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100 Bending Capacity: 400 Ton Bed Length: 4100 mm (4.1 Metres) Total; 4 axis - 2 axis back gauge Hsdjzl D Efopfx Ak Ujnu Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Hnodpfxezd H U Hj Ak Uju Additional Details: -

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Hsdpfxsz Rmp Ne Ak Ujnu Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Hodez Et E Eopfx Ak Ujnu Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) Hsdsz Rl Nhepfx Ak Uonu - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s Hodpozru Nzjfx Ak Usnu • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table length: 3,000 mm, table height: 860 mm, input voltage: 400 V, overall weight: 6,100 kg, total length: 3,790 mm, total width: 2,230 mm, total height: 1,860 mm, operating pressure: 315 bar, back gauge: 1,020 mm, oil tank capacity: 100 l, number of support arms: 3, back gauge adjustment: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Amada sheet metal shear GXII 630 The Amada GXII 630 is a series of high-quality, hydraulic CNC sheet metal shears for precise cutting of sheet metal. This machine is in exceptionally good condition and has minimal operating hours. * Automatic adjustment of cutting clearance * Automatic adjustment of cutting angle * Motorized back gauge, CNC controlled * 3 front gauges * Angular front gauge * Safety guard on the rear of the machine * Sheet support system * CE certified Specifications Force (kN) 197 Cutting length (mm) 3050 mm Maximum speed (cuts/min) 33 Material thickness (max.): Steel (mm) 6.35 Hsdpjz Rn Hvsfx Ak Uenu Stainless steel (mm) 4 Aluminum (mm) 8 Machine dimensions: Length (mm) 3790 Width (mm) 2250 Height (mm) 1866 Weight (kg) 6150 Machine will be disassembled and loaded.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Hnedpjwzh A Nofx Ak Ueu Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross