Used Lollipop Line for sale (9,600)

Condition: new, Year of construction: 2026, Power supply: 400 V Motor power: 5.5 kW Spindle speed: 50 – 1520 rpm Table dimensions: 1700 × 400 mm Maximum table load: 1000 kg Table movement range: 1300 x 400 x 600 mm Maximum table load: 1000 kg Machine type: Console milling machine Design: Heavy Line Cedpfxozr I Spo Aagsrf Application: Metal machining Machine dimensions (L × W × H): 2245 × 2100 × 2000 mm Weight: 3700 kg

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4543.CHO24.PU66035 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology Package 5, exterior mirrors with blinker, electrically adjustable, heated and foldable, audio system, 13-inch multifunctional display, Ford SYNC 4 incl. navigation, blind spot assist incl. CTA, rear parking brake assist, Pre-Collision Assist, camera- and radar-based, driver alertness monitor, wrong-way driver warning, lane keeping assist incl. lane departure warning and lane change assist, traffic sign recognition, park pilot front/rear, cruise control, adaptive, intelligent speed limiter, rear view camera, steering wheel, Sensico in leather look, electric safety and ESP - Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant FURTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed transmission - ABS electronic with EBD Crodpjtr Srljfx Aagsf - Airbag, driver side - Exterior mirrors, electrically adjustable - Exterior mirror housing, plastic, black - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Double-wing rear door/180° (without window) - Rev counter - Third brake light - Electronic safety and stability - Window lifter, electric, front - Parking brake, electronic - FordPass Connect - Windshield, heated - Floor mats: rubber floor mats, front - Grab handle, driver and passenger side - Glove compartment with lockable lid - Interior lighting, front - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Load compartment lighting (LED) - Steering wheel: steering wheel, plastic - Center console, small - Emergency assist - Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - driver alertness monitor - traffic sign recognition system - wrong-way driver warning - lane keeping assist incl. lane departure warning - park pilot system front and rear - cruise control - intelligent speed limiter with speed limit display - rear view camera - Particle filter: diesel particulate filter - Radio accessories: 4 loudspeakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m. 215/65 R16 R - Windscreen wipers with rain sensor - Headlamps with LED low beam - Sliding door: sliding door, right - Mud flaps, rear - Mud flaps, front - Power steering - Seat belts - Seats: seat package 6A - Start-stop system - Start function Ford Power - Bumper, front and rear, partially in vehicle color - Partition (metal) without window - Door handles, plastic, black-grey - Door hinges, 90 degrees - Recirculation heating - Lashing eyes 6 - Immobilizer - Heat protection glazing, slightly tinted - Central locking with remote control ... and more ---- 1st hand. German version. Errors and prior sale excepted. 2 years factory warranty from registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any further questions? We would be happy to advise you! Although despite existing controls, a deviation of the vehicle from the above description cannot be ruled ou

Condition: used, mileage: 77,040 km, power: 63 kW (85.66 HP), first registration: 06/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0204. LR70391 ----EQUIPMENT - Fiesta Van: Rear seats removed - Ford Navigation incl. Ford SYNC 3, DAB/DAB+ - Paint: Frost White - ABS electronic with EBD - Airbag: Passenger airbag deactivation - Activated carbon filter - Ambient lighting, front - Exterior mirrors, adjustable and heated - Body styling kit - Brake light, third - Headliner, black fabric - Roof console with glasses compartment - Roof spoiler, painted in vehicle color - Diesel particulate filter - Rev counter - Door sill trim "ST-Line", front - Electronic Stability Program - Driver information system - Lane Keeping Assist incl. Lane Departure Warning - Suspension: Sport-tuned - Power windows, front - Ford Easy Fuel - FordPass Connect incl. Wi-Fi hotspot - Luggage compartment cover - Luggage compartment lighting - Speed limiter - Cruise control Crjdpfxeyy Hhhj Aagsf - Transmission: 6-speed manual - Glove compartment, illuminated - Rear window wiper/washer system - Rear window heating - Interior lighting with LED technology - Intelligent Safety System - Isofix mounting - Coat hooks - Air conditioning with automatic temperature control - Headrests, height-adjustable - Radiator grille in "ST-Line" design - LED tail lights - Steering wheel: Leather steering wheel - Steering column, adjustable - Vanity mirror in driver and passenger side - Center console with integrated armrest - MyKey key system - Emergency brake light - Package: Driver Assistance Pack I - Pedals with aluminum accents - Upholstery: Fabric - Wheels: LM 7J x 17 - Wheels: Tire pressure monitoring system - Rear seat bench, split folding 40/60 - Shift knob in ST-Line design - Windscreen wipers with intermittent function - Windscreen wipers with rain sensor - Headlights in projection lens design - Headlights with "Welcome Function" - Headlight assist with day/night sensor - Power steering, electro-mechanical - Seat: Driver's seat, height-adjustable - Seat: Sports seats, front - Start-Stop system - Ford Power Start - Bumpers, painted in vehicle color - Door handles, painted in vehicle color - Variable radiator air intake - Immobilizer - Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any questions? We would be happy to advise you!

Condition: new, INTEGRATED MODULAR SOLUTIONS FOR AUTOMATED CORRECTION BOX PRODUCTION Fully automated production lines for corrugated cardboard boxes Zemat Technology Group offers state-of-the-art, flexible, and fully automated production lines for corrugated cardboard boxes, engineered for the manufacturing of custom cartons. Key Benefits: - Fully customizable – Configurable to specific production requirements - Industry 4.0 ready – Integrated with JQS Job Queue System - High efficiency – Reduces production time and costs - Quick setup change – Less than 60 seconds setup time - Intelligent automation – Touchscreen HMI control with remote diagnostics via VPN Applications: - Shipping cartons - Custom pre-printed packaging Cjdewvifnjpfx Aagsrf - Special corrugated board boxes Why choose BOXMAT production lines? - Complete automation – From feeding to stacking - No special tools required – Fast setup & reduced downtime - Scalable & modular – Expand your production capacity as needed Increase your efficiency and streamline your workflow with the integrated modular solutions from Zemat Technology Group for the automatic production of corrugated cartons. Our cutting-edge production lines are designed for manufacturers demanding flexibility, precision, and automation.

Condition: like new (used), Year of construction: 2023, Technical specifications: Measuring range, X-axis: 400 mm Measuring range, Z-axis: 500 mm Max. tool length: 600 mm Max. tool diameter: ∅ 400 mm CNC control Dimensions (width x depth x height): approx. 1200 x 900 x 2100 mm Credpfx Aaezrgdqsgef Condition: Condition is almost like new, very little use. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2019, LISEC INSULATED GLASS LINE – Year 2019 LISEC INSULATED GLASS LINE H 2500 mm L/R Max. glass size: H 2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Thickness of flexible spacer: 8-25 mm Consisting of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes Csdpfxozpwf Ho Aagjrf LISEC RSVN-35/25U - automatic vertical inspection and positioning station for spacer frames LISEC VSA-35/25 - fully automatic vertical system for applying flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - Fully automatic vertical press for laminating, flat pressing, and gas filling (argon or krypton) LISEC VL-1N/25 - Fully automatic vertical extrusion and sealing robot LISEC DOS-1 TH Mixing and Metering Unit

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Comprising: TERRUZZI Autoclave – Year 2007 Cjdpoy I Sd Rjfx Aagorf LISEC HVM26B6 Washing Machine – Year 2015 Clean Room Mangle Dimensions: 5500x2600 mm

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Crjdpjzd Ucxefx Aagsf

Condition: used, functionality: fully functional, Complete nailing line Automatic block feeder and cutter Automatic block loader Nailer Turner Nailer Corner cutter Electric marker Chamferer 90° rotator Turner Cjdpswhftfofx Aagorf Stacker Output transfer

Condition: ready for operation (used), Year of construction: 2003, EPAL STORTI PALLET NAILING LINE. LINE WORKING. SEE CONDITIONS OF SALE Csdpfxek Nf S Hj Aagsrf

Year of construction: 2010, condition: good (used), 2250mm pallet nailing line Semi-automatic nailing table Cedpfxjpy H Ers Aagsrf Turner + (optional marker) Stacker (3000mm maximum) Transfer

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, STORTI PALLET NAILING LINE 1 HYDRAULIC NAILER WITH TRANSVERSAL AND LONGITUDINAL BOARD LOADER. 1 CORNER CUTTER + 2 MARKERS 1 PALLET TURNLER Crsdpfxjtp T Nwj Aagof 1 ALTERNATIVE PALLET TURNER 1 STACKER 1 OUTPUT TRANSFER 1 HYDRAULIC NAILER WITH TRANSVERSAL AND LONGITUDINAL BOARD LOADER. 1 CORNER CUTTER + 2 MARKERS 1 PALLET TURNLER 1 ALTERNATIVE PALLET TURNER 1 STACKER 1 OUTPUT TRANSFER

Condition: used, Year of construction: 1993, functionality: not functional, Platon Stacker Csdpfxopy H E Do Aagorf 7 meter transfer

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Corali Line and Sodeme Platform Line 2004 2 Block Cutters 1 Automatic Block Feeder 1 Corali Quick-Change Mechanical Nailer 1 Turning Machine 1 Corali Mechanical Nailer 1 Corner Cutter 1 Marker 1 Turner 1 Stacker 1 Transfer Machine Sodeme Platform Line 2017 1 Mechanical Platform Nailer 1 Stacking and Unstacking System 1 Cartesian Robot Crodpszp Saljfx Aagjf

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Csdpfx Aezc N Axoagjrf Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers Cjdpfxszhub Ao Aagorf - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 Cjdozlqzmepfx Aagjrf - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Available from 12 October 2026. Location: Italy.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Codpfx Aajzlqu Tjgsrf Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Cedsztazfjpfx Aagjrf Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws Csdpfev Dit Nsx Aagorf MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Credpfezc N H Djx Aagof Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: good (used), Year of construction: 1980, You are bidding on a branded machine from the well-known German manufacturer Griebel. Features of the machine: Electric feed, cutting, and straightening machine Cuts up to 2mm steel – significantly more for aluminum (see nameplate) Usable length: slightly over 1.5m Sheet metal thickness (iron): 2mm Straightens the sheet metal using an adjustable multi-roller system Length and quantity are pre-set Weight: approximately 2 tons We also have other machines and tools available. You will receive an invoice in accordance with §25a UStG (German VAT law). The invoice amount includes VAT. I can arrange transportation services if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Crodpfjzcxa Hsx Aagsf Payment in cash upon collection. If I can assist you with anything else, please call me. Thank you. Collection should take place within 8 days after the end of the auction.

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Crsdpfxox Hx Rns Aagef Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: new, Extraction units xFUME ADVANCED/DM 4221 – Ref. No. 68 Codpsy H Ewzjfx Aagorf

Condition: excellent (used), Year of manufacture: 2004 Comprises: Credpfxeygkw Ee Aagjf 4 punching units and a forming line with 20 roll-forming stations, including welding and punching.