Used Lvd Impuls 3020 for sale (81)

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Dedpfxezty E De Ai Eewd Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, Year of construction: 1995, pressure 55 t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t LVD PPI 55/20 MNC 95 – CNC Press Brake – Year 1995 For sale is a used hydraulic CNC press brake manufactured by LVD, model PPI 55/20 MNC 95. Technical Specifications: Manufacturer: LVD, Belgium Model: PPI 55/20 MNC 95 Year of Manufacture: Pressing Capacity: 55 tonnes Bending Length: Approx. 2,000 mm CNC Control: MNC 95 Power Supply: 380 V / 50 Hz Connected Load: 12.5 kW Rated Current: 25 A Machine Weight: Approx. 4,300 kg Serial Number: 22162 Condition: The machine is used and shows signs of wear consistent with its age. It is offered as being in working condition. However, its full technical functionality and all machine functions have not been comprehensively tested and therefore cannot be guaranteed. The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs. Age-related wear, technical defects and potential maintenance or repair requirements cannot be ruled out. Important Notice: All technical specifications, equipment details and information regarding the machine's condition are based on the available nameplates, photographs and other information currently available. All information is provided in good faith but is strictly subject to verification and without any guarantee as to its accuracy, completeness or continued functionality. The technical specifications and statements regarding operational condition do not constitute a guarantee of condition, performance or fitness for purpose. Errors, omissions, technical discrepancies and prior sale excepted. Prospective buyers are strongly advised to inspect and test the machine and independently verify all relevant technical specifications and its operational condition before purchasing. Dedsx Tu Szspfx Ai Eowd Inspection by prior appointment is possible.

Condition: used, Year of construction: 1998, pressure 60T t chamfer lenght 2000 mm distance between columns / mm Djdpeylz Dysfx Ai Eowd height of stroke / mm work feed / mm/s control / total power requirement / kW weight of the machine ca. / t LVD PPEB 60/20 MNC 95 – CNC Press Brake – Year 1998 For sale is a used hydraulic CNC press brake manufactured by LVD, model PPEB 60/20 MNC 95. Technical Specifications: Manufacturer: LVD, Belgium Model: PPEB 60/20 MNC 95 Year of Manufacture: 11/1998 Pressing Capacity: 60 tonnes / 600 kN Bending Length: Approx. 2,000 mm CNC Control: MNC 95 Power Supply: 400 V / 50 Hz Connected Load: 10.5 kW Serial Number: 25578 Condition: The machine is expressly sold as untested and non-operational. No technical inspection or functional testing has been carried out. The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs. Repairs may be required, and technical defects cannot be ruled out. Important Notice: All technical specifications and equipment details are based on the available nameplates, photographs and other information currently available. All information is provided in good faith, but is strictly subject to verification and without any guarantee as to its accuracy or completeness. The technical specifications do not constitute a guarantee of condition, performance or fitness for purpose. Errors, omissions, discrepancies and prior sale excepted. Prospective buyers are strongly advised to inspect the machine and independently verify all relevant technical specifications and its condition before purchasing. Inspection by prior appointment is possible.

Condition: used, Year of construction: 1995, pressure 55 t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t LVD PPI 55/20 MNC 95/C – CNC Press Brake – Year 1995 For sale is a used hydraulic CNC press brake manufactured by LVD, model PPI 55/20 MNC 95/C. Technical Specifications: - Manufacturer: LVD, Belgium - Model: PPI 55/20 MNC 95/C - Year of Manufacture: Pressing Capacity: 55 tonnes - Bending Length: 2,000 mm - CNC Control: MNC 95/C - Power Supply: 380 V / 50 Hz - Connected Load: 12.5 kW - Rated Current: 25 A - Machine Weight: Approx. 4,300 kg - Serial Number: 22161 Condition: The machine is used and is reported to be in working condition. However, its current operational condition and full functionality have not been independently verified or guaranteed. The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs. Age-related wear, technical defects and potential repair or maintenance requirements cannot be ruled out. Important Notice: All technical specifications, equipment details and information regarding the machine's condition are based on the available nameplates, photographs and information currently available. Djdpfxsyk Ikdj Ai Eewd All information is provided in good faith but is strictly subject to verification and without any guarantee as to its accuracy, completeness or continued functionality. The technical specifications and statements regarding operational condition do not constitute a guarantee of condition, performance or fitness for purpose. Errors, omissions, discrepancies and prior sale excepted. Prospective buyers are strongly advised to inspect and test the machine and independently verify all relevant technical specifications and its operational condition before purchasing. Inspection by prior appointment is possible.

Year of construction: 2000, condition: excellent (used), LVD Delta 1250 in perfect condition with many tools. Dwodpfx Aiorgqrno Eed X Y - 2500 x 1250, plus reposition 2 x Indexing head

Condition: used, total length: 6,400 mm, Colour: White Weight: 17.500 kg Dwedpszkui Eefx Ai Esd - Documentation available: Yes - Serial number: 13707 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Angle adjustment: Motorized - Options: Digital readout - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, control type: CNC control, actuation type: hydraulic, pressing force: 300 t, CNC crowning Hydraulic tool clamping Dwsdpfx Aijwrza Ae Eed EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 31652, pressing force: 80 t, Year 2007 Serial 31652 6 Axis Laser safe Upper attachment Wila hydraulic Djdpfjvcc Eisx Ai Eowd Lower attachment LVD hydraulic Software : CADMAN-B

Condition: good (used), Year of construction: 2002, LVD work height max. 900 mm ALPHA 1012 Control CADMAN CNC punching pressure 16 t plate thickness 8 mm plate length 1250 mm plate width 1000 mm total power requirement 13 kW weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 mm Dwedpfoyx Itcox Ai Eod

Condition: used, LVD MVS 5050 × 6 – Technical Specifications: * Maximum sheet thickness: 6.35 mm * Maximum cutting length: 5,050 mm Dwedpfx Aiezmam Ie Eed * Back gauge range: 750 mm * Adjustable cutting angle: 0.5° – 2.5° * Adjustable blade clearance: 0.05 – 0.7 mm * Strokes per minute: 12 – 45 * Main motor: 15 HP (approximately 11 kW) * Machine weight: 12,000 kg * Power supply: 230 V

Condition: ready for operation (used), Year of construction: 2019, laser power: 8,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 130 mm, overall weight: 14,000 kg, total height: 2,250 mm, product length (max.): 10,500 mm, number of axes: 3, This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information. • Laser source: IPG • Maximum sheet size: 3000 × 1500 mm • Positioning speed (X–Y): 140 m/min • Positioning accuracy: ±0.050 mm/m • Repeatability: ±0.025 mm • Maximum sheet weight: 900 kg Djdpfsx S Sklex Ai Ejwd • Electrical consumption: 28.1 kW/h • Compressed air consumption: 30 Nm³/h • Cutting gases: Oxygen (O₂) / Nitrogen (N₂) • Gas pressure: min. 12 bar – max. 32 bar • Ground resistance: < 10 Ohm Additional equipment • Interface for third-party automation system LM4400 • Automatic nozzle changer LM5130 • Automation cleaning unit LM5600

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake LVD PPBL 40/20 Year of construction: 1999 Serial number: 25656 Technical specifications Pressing force: 400 kN Working length: 2000 mm Distance between uprights: 1640 mm Stroke: 100 mm Distance table – ram: 300 mm Throat depth: 200 mm Table width: 140 mm Approach speed: 80 mm/s Working speed: 10 mm/s Return speed: 90 mm/s Weight: 3300 kg Motor: 3 kW Options included: ELGO P8822 for X and Y axes Dwsdpfxjy Avr Uo Ai Esd 2 fingers on the back gauge

Condition: used, pressure 100 t chamfer lenght 3000 mm distance between columns 2550 mm stroke 150 mm Dwodoyqwbxepfx Ai Eed total power requirement . kVA Number of working hours . h weight of the machine ca. 8,3 t Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Dsdpfjx Tqt Ujx Ai Eswd Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13.707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Dwjdpszuwzrofx Ai Eed Back gauge type: Electric Back gauge depth: 1,000 mm Angle adjustment: Motorized Sheet support system: Pneumatic MACHINE DETAILS Power: 11 kW Drive type: Hydraulic Control: Conventional Control system: Elgo Dimensions & Weight Overall length: 6,400 mm Shipping weight: 17,500 kg EQUIPMENT CE certificate Documentation

Condition: used, LVD Shear Dwsdpfx Aijx Tqtbe Eed Type HST C-10/31 Capacity 3000 x 10

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage Dwedpfxsyag Uae Ai Eed

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Dedpszbb R Ssfx Ai Ejwd

Condition: excellent (used), Year of construction: 1996, Excentrical press: Capacity: 100 ton Clutch: airclutch Dedpfx Aishtiwhj Ejwd Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Height: 2800mm Weight: 9.5 ton

Year of construction: 2023, condition: new, ! Machine offer for customers in Lithuania / Latvia / Estonia. Dsdpsiy N Npsfx Ai Eowd The LVD PHOENIX laser is fiber laser cutting machine which combines high dynamics with flexibility for cutting thick material. PHOENIX is available in different sizes: 3m x 1,5 m, 4m x 2 m and 6m x 2m. Power source varies from 4kW to 20 kW. As standard machine is equipped with automatic shuttle tables, cutting head, adaptive collimation unit (until 12kW), capacitive height sensing, automatic nozzle cleaning, automatic sheet referencing, automatic cutting gas selection (oxygen, nitrogen and compressed air), chiller and fume extraction, SIEMENS control unit. The PHONEX laser cutting machines are compatible with huge range of automatization solutions such as loading / unloading and sheet storage (up to 6 meters), nozzles changer. Shuttle table All PHOENIX lasers come with automatic shuttle tables. The height of the table is 930 mm. The speed of table change depends on laser size: for 3015 – 35 sec., for 4020 -39 sec. and for 6020 – 48 sec. Tables on PHOENIX 4020 and 6020 models are split into 2m x 1m modules for easy replacement. Cutting head Laser source power on PHOENIX laser cutting machines varies from 4 to 20 KW (available: 4kW, 6kW, 10kW, 12kW, 20kW). The cutting head for 4 – 12 kW lasers could be equipped with 150 or 200 mm focusing lens, for powerful 20kW lasers – 250 mm focusing lens are used. Frame The PHOENIX 3015 model has a welded steel mono frame construction. This allows high accelerations without losing the accuracy. Due to the high frame rigidity, no special foundations are requested. The frame of PHOENIX 4020 and 6020 exists out of 4 parts. One rigid left and right frame that are connected with two bolted beams.

Year of construction: 1992, condition: good (used), LVD PPMNZ 50 ton - 3m CNC year 1992 CNC AUTOBEND 7 Dodep Du Uwepfx Ai Ejwd cnc in 3 axes Y1 Y2 X The machine is connected to electricity, with the possibility of checking it at work.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,513 h, machine/vehicle number: 31662, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Operating hours Dedpfxsylwg Do Ai Eewd Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Wila hydraulic upper and lower clamping

Condition: new, Year of construction: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Dsdpfx Aioixz H Ej Eswd A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Dwsdpfx Ajzk Dzdji Eed Back gauge type: Electric

Condition: used, Year of construction: 2003, punching pressure 16 t plate thickness 8 mm plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW control Cadman CNC voltage 400 V Dwsdped Ih Spefx Ai Eed weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 m