Used Manual Lathe for sale (19,667)

Condition: ready for operation (used), Year of construction: 1985, Available immediately from our location: L & Z lathe LEGOOR Type 300 Year of manufacture 1985 Center height 300 mm Diameter over bed 620 mm Diameter over carriage 390 mm Diameter in the gap 850 mm Spindle bore 104 mm Tailstock, Morse 5 Tailstock quill travel 275 mm Dksdpfx Aez I Ih Tjp Iju Spindle speeds 20 – 1500 rpm Thread cutting without gear changes Drive power 15 hp Weight 3.5 tons Several chucks Faceplate 2 centers Multifix steel tool holder with inserts Price: Euro 4,750.00 plus VAT, ex works.

Condition: like new (used), LATHE FOR WORKSHOP USE For sale: a HAGER HDE-59 BIG lathe with a distance between centers of 1,000 mm. This lathe, which was used in a workshop setting, is in excellent condition. Technical data: - Motor: 2.2 kW / 3 hp / 400 V - Speed ranges: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height: 250 mm - Distance between centers: 1,000 mm - Tool rest: 350 mm - Direction of rotation switch - Spindle: M33 x 3.5 mm with ASR (Euro) safety slot - Spindle and tailstock taper: MK3 - Hollow spindle diameter: 20 mm - Main spindle: 4-bearing - Quill travel: 150 mm (with scale) - Overall length: 1,780 mm - Weight: 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, turning lathe, wood turning lathe, turning, lathe tools, woodturning, turning, machine, Hager Reference: R-A0117 Dkjdpfxez Ngb Ns Ap Iju

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Turning length 1500 mm Dedpez Ixl Aofx Ap Ieku Drive power 5.5 kW Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Price: Euro 2,250.00 plus VAT, ex works.

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Dkedjz Ip Riopfx Ap Ieu Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: used, Year of construction: 1999, Cycle-controlled lathe Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control system D1 Operating hours: 28,506 Center distance: 1,000 mm Center height: 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over cross slide: 340 mm Max. diameter over tool rest: 600 mm Length of tool rest: 140 mm Max. workpiece weight: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-position turret Includes 1 new RÖHM chuck jaw! Dimensions: 2,850 x 2,280 x 1,750 mm Dksdpszt S Svefx Ap Iou Weight: 3,350 kg Available immediately 51026

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 00 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 2100 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system PARAT face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Dkjdpfx Apez I T Rao Isu Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m

Condition: used, Multispindle lathe GILDEMEISTER GS 20 Dkjdpfxjz I Utce Ap Iju

Condition: used, Multispindle lathe GILDEMEISTER AS 48 Dedpfez I Ut Nex Ap Ieku

Condition: used, functionality: unexamined, Weiler lathe Location: Bad Tölz Djdpfx Ajzv Smljp Isku Inspections are welcome. We have other used machines available. Please feel free to contact us.

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. Dkodpfx Aezarxwop Ieu The machine can be inspected under power by prior arrangement.

Condition: good (used), Year of construction: 2004, 569mm Swing, 419mm Max Turned Diameter, 640mm Between Centres, 10 Station Turret, 3500rpm 22KW Spindle, Fanuc I Control, Dkodszzzh Nspfx Ap Ieu 24m/minute rapids, 250mm Power Chuck , parts catcher, Tool setter, Low Volt Light

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, Dsdpozzwgnsfx Ap Ijku spindle speed 4,500rpm , 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: good (used), mileage: 524,622 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, tire size: 000/13R22,5, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel-air, total length: 5,880 mm, total width: 2,550 mm, total height: 3,120 mm, Year of construction: 2006, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, retarder, traction control, = Additional Options and Accessories = - Driver’s log (tachograph) - Fixed - Halogen lamp - Hydraulic system - Manual - Auxiliary drive - Standard day cab - Pump - Radio/cassette Dkjdpfxsz Ay Nbj Ap Iju - Fabric - Additional braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7255 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 600 liters, Saddle coupling height: 124 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Suspension type: Air suspension, Cabin type: Standard day cab, Cruise control, Driver’s log (tachograph), Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Multi-colored, Lighting type: Halogen lamp, Engine power: 279 kW (374 Hp), Fuel: Diesel, Euro: 3, Gearbox type: Manual, Gearbox type: Scania, Gears: 12, Clutch pedal, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Gearbox Gearbox: SCA, 12 gears, Manual gearbox Axle Configuration Tire size: 000/13R22,5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inside: 6 mm; Tire tread depth left outside: 10 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm; Suspension: Air suspension Weights Unladen weight: 7,255 kg Payload: 11,745 kg GVW: 19,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm Dodpfx Aperbm T De Ijku -Weight: 1327 kg

Condition: ready for operation (used), Year of construction: 2008, turning diameter 500 mm swing dia. 800 mm turning diameter over bed 450 mm turning length 800 mm x-travel 360 mm z-travel 980 mm spindle turning speed range 3200 U/min max. torque on the spindle 235/939 Nm spindle bore 110 mm turret (x-stations) 12 control Fanuc 31i tailstock quill taper MT 4 total power requirement 30 kW weight of the machine ca. 7,6 t dimensions of the machine ca. LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump Dksdpez Ebvxjfx Ap Ieu

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Working area: Permissible diameter: over the carriage 270 mm over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo Djdpfx Aez Ezc Esp Ijku About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 Dedpfepviqiex Ap Isku YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Röhm KZZT-AF 65/6 Dedpfjz Hh A Iox Ap Ioku Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HE 210 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Barloader, EMCO TOP-Load 10-65 (TOP Automazioni ETL 10-65) Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF David Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank Dkjdpfxeza Hids Ap Isu • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: good (used), mileage: 591,544 km, power: 177 kW (240.65 HP), first registration: 01/2008, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro4, suspension: steel-air, total length: 8,990 mm, total width: 2,580 mm, total height: 3,470 mm, loading space length: 6,800 mm, loading space width: 2,450 mm, loading space height: 2,390 mm, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, electric window regulation, seat heater, tail-lift, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 6860 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 200 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1500 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Radio/cassette, Color: Multi-colored, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Flashing lights, Engine power: 177 kW (237 hp), Engine displacement: 7146 cc, Fuel: Diesel, Euro: 4, Transmission type: Manual, Transmission type: Volvo, Gears: 6, Clutch pedal, Power steering, ABS, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Aluminum, Tail lift size: 180 x 255, Spare wheel, Spare wheel tread depth: 13% = Additional Information = Transmission Transmission: VOL, 6 gears, Manual gearbox Axle Configuration Tire size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Dual tires; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 9 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Tare weight: 6,860 kg Payload: 5,130 kg GVW: 11,990 kg Functional Tail lift: Dhollandia, Rear door, 1500 kg Loading platform height: 101 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, covering various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly Dkodpozln Nusfx Ap Iju • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Djdpfx Apjz Hxz Us Ijku Main spindle torque (Nm): 169.0 Travel ranges: X: 205 mm Z: 340 mm Linear guide -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: used, Multispindle lathe INDEX MS25E Dkodpfez I Utisx Ap Isu

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Dkedpfsz I Utpsx Ap Isu

Condition: used, Multispindle lathe GILDEMEISTER AS 48 Dsdpfx Apjz I Uumo Ijku

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet -Change gears -Drill chuck & rotating center -Documentation Dedpfx Asz Nltdop Ieku Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted.