Used Manual Lathe for sale (18,329)

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 100 mm, turning diameter: 440 mm, center height: 220 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 55 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the scheduled period between 04.05.26 and 07.05.26. TECHNICAL DETAILS Swing over bed: 440 mm Swing over cross slide: 200 mm Spindle speed range: 55 – 1,600 rpm Spindle bore: 58 mm Dsdpfx Aoyr Rhuoffocf Distance between centers: 500 mm Center height over bed: 220 mm Center height over carriage: 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,500 x 1,700 mm Machine weight: 2,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Three-jaw chuck (diameter: 200 mm) Workshop trolley Multifix turning tool holder, Type BD 25120 Multifix turning tool holder, Type BH 32130 Centers Thread cutting dies Various indexable inserts Turning tools Jaw sets Thread cutting accessories External reference: Lot 81

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 14475, load capacity: 1,000 kg, lifting height: 1,000 mm, fork length: 1,200 mm, overall weight: 250 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Load capacity: 1,000 kg Fork length: 1,200 mm Lift height: 1,000 mm Djdpsyr Rc Eofx Affocf MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,700 x 800 x 2,000 mm Weight: 250 kg External reference: 92

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Dcodpfxsytbqve Affef Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80011, turning diameter over bed slide: 260 mm, center height: 130 mm, turning length: 500 mm, spindle speed (max.): 3,135 rpm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 500 mm Swing over bed: 260 mm Swing over cross slide: 200 mm Centre height over bed: 130 mm Dcodpfjym Udpjx Affef Centre height over cross slide: 100 mm Spindle bore: 22 mm Spindle speed: 13 to 3,135 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,500 mm Weight: 500 kg EQUIPMENT Tailstock Quick change tool post Collet chuck 8 additional tool holders External reference: Pieper - Lot 61

Condition: ready for operation (used), functionality: fully functional, turning diameter: 400 mm, center height: 200 mm, spindle speed (max.): 2,500 rpm, overall weight: 1,500 kg, three-jaw chuck diameter: 240 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing over bed: 400 mm Height of centers over cross slide: 120 mm Swing over cross slide: 240 mm Distance between centers: 1,100 mm Center height over bed: 200 mm Three-jaw chuck diameter: 240 mm Spindle speed: 75–2,500 rpm Spindle bore: 52 mm Dsdpfx Asym Nzvoffscf MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 21 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,100 x 1,900 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder Two-axis digital readout (Manufacturer: FAGOR) External reference: Lot 14 / Ulmer

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, controller model: MAZATROL 640 T, overall weight: 4,000 kg, machine/vehicle number: 310163917, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: 150 mm Z-axis travel: 250 mm MACHINE DETAILS Control: MAZATROL 640 T Operating voltage: 200 V Frequency: 50/60 Hz Rated current: 89 A Connected load: 17.8 kVA Dimensions & Weight Dedpfx Afsym Dhwefjcf Dimensions (L x W x H): 3,000 x 2,000 x 2,200 mm Weight: 4,000 kg EQUIPMENT 12-position tool turret Tailstock External reference: Elos - Lot 16

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Dedeyx Tzrspfx Affscf Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: K 240/50 662, turning height: 2,150 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled between 2012 and 2016! 2012: Dcodpfxsyw N Ufo Affjf - Digital measuring system (Positip 880) installed - New power clamping band - New selector switches 2015: - Directional clutches on the X-axis replaced - Gibs and nuts on both supports re-adjusted 2016: - All clutches in the main drive re-ground - All bearings in the main drive replaced, including the power supply unit - Drive shaft replaced - Several sets of discs - New spur gear, etc. TECHNICAL DETAILS Turning height: 2,150 mm Swing diameter: 2,200 mm Faceplate diameter: 2,000 mm Max. workpiece weight: 20,000 kg X-axis travel: 1,225 mm Rapid traverse X-axis: 2 m/min Rapid traverse Z-axis: 2 m/min Spindle speed: 3 – 125 rpm MACHINE DETAILS Number of tool turrets: 1 Total weight: 26,000 kg EQUIPMENT Documentation/Manual

Year of construction: 1987, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 260 mm, center height: 140 mm, spindle speed (max.): 3,550 rpm, machine/vehicle number: 61699, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 260 mm Swing diameter over cross slide: 160 mm Centre height over cross slide: 80 mm Centre height over bed: 140 mm Centre distance: approx. 500 mm Spindle speed: 71 – 3,550 rpm Spindle bore: approx. 28 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,900 mm Weight: 800 kg EQUIPMENT Tailstock Dsdpfx Afjym Rgtsfjcf Multifix Type A toolholder Steady rest Four-jaw chuck (diameter: 120 mm)

Condition: not inspected (used), functionality: unexamined, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Swing diameter over cross slide: approx. 260 mm Center height over cross slide: 130 mm Center height over bed: 170 mm Center distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 12 A Connected load: 4.8 kW Dimensions & Weight Dcsdpfx Afjym N Nyjfjf Dimensions (L x W x H): 1,800 x 700 x 1,500 mm Weight: 1,200 kg EQUIPMENT Tailstock Multifix quick-change toolholder Quick-action chuck Including collets Various accessories External reference: Weitner

Year of construction: 1985, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 280 mm, center height: 140 mm, spindle speed (max.): 1,680 rpm, machine/vehicle number: 31601, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely pickup either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 180 mm Center height over cross slide: 90 mm Center height over bed: 140 mm Spindle speed: 16 – 1,680 rpm Center distance: 550 mm Spindle bore: approx. 38 mm Djdpoym N Hfofx Affecf MACHINE DETAILS Operating voltage: 380 V Rated current: 6 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,800 mm Weight: 800 kg FEATURES Tailstock Multifix tool post HEIDENHAIN digital readout External reference: Oberthür

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, bar passage: 32 mm, The following works have been carried out on the machine in recent years: February 2022 – X2 axis ball screw replaced and bearings renewed August 2022 – X2 axis controller replaced September 2023 – Measuring system / controller for Ti axis replaced March 2025 – Measuring system for Ti axis replaced TECHNICAL DETAILS Bar capacity: 32mm Dcsdpfx Aoyux N Eoffof EQUIPMENT 10 tool stations on turret with Y-axis for front and rear machining 5 gang tool positions 3 tool positions on drilling block for rear machining 4 driven tools for cross operations C-axis main spindle Milling interpolation Cutting radius compensation Synchronous tapping ER16 holders

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Djdpfx Aoynhd Soffscf Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 012015030, center height: 200 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,000 kg, three-jaw chuck diameter: 210 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Centre height over cross slide: 120 mm Centre height over bed: 200 mm Centre distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm Three-jaw chuck diameter: 210 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Connected load: 5 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Three-jaw chuck SMW External reference: Weitner Dodpfx Asym N Enjffecf

Condition: not inspected (used), functionality: unexamined, turning diameter: 280 mm, center height: 145 mm, center width: 750 mm, spindle speed (max.): 3,500 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 178 mm Centre height: 145 mm Centre distance: 750 mm Spindle speed: 70 – 3,500 rpm Spindle bore: 35 mm Spindle nose: D 1-3 Dcjdeym N D Ropfx Affjf Tailstock taper: 3 MT Leadscrew diameter: 25 mm Thread: 6 mm pitch MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 11 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,800 mm Weight: 800 kg External reference: Neuburger

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Dodpfx Afjym A E Isfjcf Counter spindle External reference: L. Schaible

Condition: not inspected (used), functionality: unexamined, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, overall weight: 8,000 kg, three-jaw chuck diameter: 310 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within one of the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 3,000 mm Center height over bed: 300 mm Swing diameter over bed: 600 mm Center height over carriage: 200 mm Dsdpfx Afsym Dcusfecf Swing diameter over carriage: 400 mm Spindle speed: 9 to 1,800 rpm Spindle bore: 110 mm Three-jaw chuck diameter: 310 mm Steady rest diameter: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,400 x 2,000 mm Weight: 8,000 kg EQUIPMENT Tailstock Multifix turning tool holder Three-jaw chuck Two-axis digital readout (SONY) Steady rest External Reference: Pieper – Lot 57

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Dcedeyxm Tnjpfx Affef Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 315357, turning diameter over cross slide: 420 mm, turning length: 1,000 mm, turning diameter: 600 mm, spindle speed (max.): 3,200 rpm, controller model: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over cross-slide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main Spindle Speed range: 16 – 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Dedpfeyxmurex Affjcf Chuck diameter: 260 mm Spindle nose: 220H5 Tool Turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS CNC control: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Floor space required: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (Model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,546 h, functionality: fully functional, turning length: 284 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, controller model: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Main spindle max. speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Djdpfx Afjyxmmuefjcf Main spindle drive power: 11 / 7.5 kW Travel - X axis: 170 mm Travel - Z axis: 335 mm Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total power requirement: 25 kVA Dimensions & weight Installation space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Cutting hours: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant unit Tailstock Parts catcher Signal lamp Hydraulic unit Three-jaw chuck SEOAM CAH-08 Collet chuck HAINBUCH nova size 65 Tool setting device Interface for bar feeder Bar loading magazine Breuning SIMAG 70.1-3000 Various tool holders

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 380 mm, turning diameter: 450 mm, spindle bore: 59 mm, rotational speed (max.): 5,000 rpm, controller model: Seicos 40L Multi, TECHNICAL DETAILS Turning diameter: 450 mm Turning length: 380 mm Max. machining diameter: 340 mm Travel X-axis: 215 mm Travel Z-axis: 400 mm Bar capacity: 51 mm Speed range: 30 to 5,000 rpm Drive power - spindle motor: 11 / 7.5 kW Spindle nose: A2-6 Spindle bore: 59 mm Bearing diameter: 100 mm Turret: 16 stations Feed rate: 0.001 to 500 mm/min Rapid traverse X/Z: 30 m/min Shank diameter: 25 x 25 mm Drill shank diameter: 40 mm Tailstock taper: MT 5 Tailstock travel: 300 mm MACHINE DETAILS Control: Seicos 40L Multi Total power requirement: 23 kVA Dimensions & Weight Footprint: approx. 5.5 x 2.8 x 2.2 m Machine weight: approx. 4.6 t EQUIPMENT Documentation Chip conveyor Tailstock Signal lamp Parts discharge Tool setting arm Work area illumination Dedpfx Afjyxmkaofecf Tool holder

Condition: ready for operation (used), Year of construction: 2005, operating hours: 21,600 h, functionality: fully functional, machine/vehicle number: 80439430900, turning diameter over cross slide: 465 mm, turning diameter: 680 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, distance between centers: 1,150 mm, TECHNICAL DETAILS Max. spindle speed: 3,500 rpm Centre distance: 1,150 mm Centre height: 360 mm Z-axis travel: 1,050 mm X-axis travel: 300 mm Swing diameter over bed: 680 mm Swing diameter over cross slide: 465 mm Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Linear axis X and Z measuring system resolution: 0.001 mm Max. workpiece weight between centres: 350 kg Centre taper: MK 5 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Operating current: 80 A Machine weight: 7,500 kg Dcsdpoyw H E Uofx Affof EQUIPMENT Röhm power chuck (Röhm Duro-NC 260/3) Tool holders

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, turning diameter over bed slide: 550 mm, controller model: FANUC SERIES 0i-TD, No reserve price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the machine within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 550 mm Maximum turning length: 209 mm Travel distance X-axis: 100 mm Travel distance Z-axis: 300 mm Spindle bore: 62 mm Rotational speed of driven tools: 5,000 rpm Spindle speed: 4,500 rpm Maximum bar diameter: 51 mm Feed rate X-axis: 170 mm/min Feed rate Z-axis: 335 mm/min Rapid traverse (X and Z axis): 36 m/min Tailstock quill diameter: 60 mm MACHINE DETAILS Control: FANUC SERIES 0i-TD Dedpeyng Nmsfx Affjcf Operating voltage: 400 V Frequency: 50 Hz Rated current: 75 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,200 mm Weight: 4,000 kg EQUIPMENT 12-position tool changer Driven tool stations Chip conveyor External reference: Elos - Lot 15

Condition: not inspected (used), functionality: unexamined, turning diameter: 360 mm, center height: 180 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: approx. 360 mm Swing diameter over cross slide: 240 mm Center height over cross slide: 120 mm Center height over bed: approx. 180 mm Dodpfxoym N D De Affscf Spindle bore: approx. 48 mm Center distance: approx. 700 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Quick-change chuck Various steadies Digital readout External reference: Lot 18 / Ulmer

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 5012221, spindle bore: 58 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,700 kg, center width: 760 mm, bed width: 300 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 430 mm Swing diameter over cross slide: 240 mm Swing diameter over gap: 690 mm Distance between centers: 760 mm Bed width: 300 mm Spindle bore: 58 mm Spindle speed: 20 - 2,000 rpm Longitudinal feeds: 0.05 - 0.82 mm/rev Cross feeds: 0.02 - 0.4 mm/rev Metric threads: 0.5 - 7 mm Dcedjym A Amjpfx Affef Lead screw diameter: 35 mm Lead screw pitch: 6 mm Tailstock quill diameter: 58 mm Tailstock quill travel: 150 mm Quill taper: MT4 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,890 x 900 x 1,800 mm Weight: 1,700 kg External reference: Limani/Maric