Used Mazak Quick Turn 6 for sale (301)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Technical Specification Lsdpfoy T Hbzox Aglerr Through-spindle Coolant Yes

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° Lrsdpszqt Umjfx Aglor C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Lrodpfsyymrmex Agljr

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 22,000 W, total height: 1,840 mm, total width: 1,780 mm, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: 640T Nexus, product length (max.): 2,353 mm, number of axes: 4, This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details. - Work Area:- Max. Swing Diameter: 675 mm- Max. Swing Diameter over Cross Slide: 276 mm- Max. Turning Diameter: 380 mm- Max. Bar Work Capacity: 65 mm- Main Spindle:- Main Drive Power (30 min rating / 100% continuous): 26 kW / 22 kW (Integrated Spindle Motor)- Max. Torque: 350 Nm- Spindle Nose: A2-6"- Spindle Bore: 76 mm- Chuck Diameter: 210 mm- Second Spindle (Sub-spindle):- Drive Power (30 min rating / 100% continuous): 10 kW / 7.5 kW- Max. Torque: 75 Nm- Speed Range: 35 - 6,000 rpm- Indexing: 0.001°- Chuck Diameter: 169 mm- Tool Turret:- Tool Positions: 12- Tool Mounting Type: VDI-like- Turning Tool Shank Height: 25x25x150 mm- U-Drill Diameter: 20 mm- Boring Bar Shank Diameter: 40 mm- Indexing Time: Approx. 0.2 s (1 step)- Driven Tools (Live Tooling):- Drive Power (10 min rating): 5.5 kW- Speed Range: 25 - 4,500 rpm- Max. Torque: 35 Nm- Travel Ranges & Speeds:- X-Axis Travel: 230 mm- Z-Axis Travel: 575 mm- Rapid Traverse Rate X-Axis: 30 m/min- Rapid Traverse Rate Z-Axis: 33 m/min- Tool Setting / Monitoring:- Automatic Tool Breakage Recognition- Automatic Tool Wear Compensation Adjustment Range: 9,999 mm- Tool Presetter: Tool Eye- Coolant & Pneumatics:- Coolant Tank Capacity: 160 l- Pneumatic Pressure: 5 bar, 100 l/min- Machine Dimensions & Weight:- Connected Load: 46.2 kVA- Operating Voltage: 400 V / 50 Hz- Required Floor Space: 1.740 x 1.780 mm (Base layout space)- Transport Dimensions (QTN 200 M - U 500): 2,353 mm (L) x 1,780 mm (B) x 1,840 mm (H)- Machine Weight: Approx. 4,900 kg - 5,100 kgincluded: LNS QUICK LOAD SERVO 3 (2004)- Type: Automatic Short Bar Loader- Bar Diameter Range: 6 mm to 120 mm- Bar Length Range: 100 mm to 1600 mm Technical Specification Counter Spindle Yes Driven Tools Yes Lredpfx Agjzqz D Njler

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Mazak Power Center SV-12 with Mazatrol CAM M-2, including a tool changer for 30 tools, a grooved clamping table, and other accessories. The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture: 1986 Technical data Travel distances: X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system: Mazatrol Cam M-2 Table size: 1300 x 500 mm Max. table load: approx. 800 kg Travel distance X-axis: 1250 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 550 mm Spindle mount: BT 40 / SK 40 Spindle speed: max. 400 – 6000 rpm Tool changer: 30 tools Drive power: 11 kW Lodpfx Aszq H A Deglorr Weight: 7000 kg L x W x H: 360 x 300 x 295 cm

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Type: AJV25/404 Mazak with 2 work tables and 3 machine vises, as well as accessories, including 1 T-slot table, 1 additional machine vise, 1 chip conveyor, and 1 tool changer with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Rapid traverse rate: x/y-axis: 24 m/min z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Table width: 410 mm Lredpfx Ajzq Hw Usglor Workpiece weight: 300 kg Tool changer capacity: 40 Spindle taper: CAT 40 Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data Ljdpfxszq Hwno Aglsrr X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: used, Year of construction: 1997, Mazak VTC-20B M+ Vertical CNC Machining Centre with Mazatrol M Plus CNC Control, Table Size 1460mm x 510mm, 20 Tool ATC, CAT 40 Spindle Taper, Spindle Speed Max 10,000rpm, Travels X = 1040mm, Y = 510mm, Z = 640mm, Table Load 500kg, Machine Weight 5850kg. S/No. 125075 (1997) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lrsdpezr Iymjfx Aglor

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, overall weight: 5,700 kg, number of axes: 4, This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details. -Information • • CNC control: MAZATROL MATRIX NEXUS 2 / MATRIX II • Working capacity: • Maximum swing diameter: 640 mm • Maximum machining diameter: 380 mm • Maximum machining length: 500 mm • Bar capacity: 77 mm • Axis travel: • C-axis rapid movement: 550 (as stated) • Tailstock travel: 500 mm (as stated) • Main spindle: • Chuck diameter: 250 mm • Nose: ASA 8 • Counter spindle: • Chuck diameter: 210 mm • Maximum speed: 5,000 rpm • Nose: ASA 5 • Driven tools: • Maximum speed: 5,000 rpm • Feed rates: • X-axis rapid traverse: 36,000 mm/min • Z-axis rapid traverse: 36,000 mm/min • Coolant tank capacity: 300 litres Additional equipment • Automatic loading and unloading system by MECCANO • FANUC ARC Mate 100iC/12 robot (per photos) Lodszpypuspfx Aglorr • Tooling package as shown in the photographs and video • Assorted tool holders as shown in the photographs Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 rpm with spindle cooling. X = 1660 Y = 510 Lrsdpjzhv Uwjfx Aglor Z = 510 1000 kg capacity on the table. Several high-quality vices are included. Weight: 9100 kg BT 40 A few holders are included. Space for 30 tools in the magazine. The machine can be picked up ex-works in week 34 of 2026.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 Horizontal Machining Center Spindle cooling Maximum spindle speed: 7000 rpm Z- 1000 mm Lrsdpfx Agjyuyfhsljr X- 1300 mm Y- 1100 mm Tool magazine for 80 tools 1 spindle, 2 pallets, 800x800 mm cubes, x-z-y-b, 4-axis

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan Lrodpfx Aszpygasglsr • High-pressure coolant through spindle system (stated as 15 kg)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Ledpfxjzpxgxe Aglorr Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: used, Year of construction: 1992, functionality: fully functional, Model: MAZAK QUICK TURN 28 N Year of manufacture: 1991 Control system: Mazatrol CAM T32-2 Lrodpfx Aezvgcbjglor Technical data Working area Max. swing diameter 510 mm Max. turning diameter 320 mm Max. turning length 972 mm Bar work up to diameter 70 mm Main spindle Speed range 30 – 3,000 rpm Main drive power 22 kW Constant torque 432 Nm Spindle nose A2 – 8 inches Spindle bore 80 mm Tool turret Number of tool positions 8-fold / 16 positions Travel distances X-axis 200 mm Z-axis 1,020 mm Travel speed Rapid traverse: X-axis 18 m/min Z-axis 24 m/min X/Z-axis 0 - 5,000 mm/min Machine data (with standard equipment) Total connected load 41 kVA Machine weight 5,300 kg Machine dimensions (L x W x H) 3.45 x 1.80 x 1.85 m

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Lsdszf Nccopfx Aglsrr

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Lsdpex Ih Dmofx Aglorr

Condition: ready for operation (used), Year of construction: 1998, A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible. Lodpfsxfvicjx Aglsrr

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Lodpfx Aotx Dn Ueglorr

Condition: ready for operation (used), Year of construction: 2005, Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement. Lrsdpfxsy Ulmre Aglor

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Lrodpoxf Iklofx Agler

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Lrjdpfx Agezugfysler Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)

Year of construction: 1997, condition: ready for operation (used), Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories. Lodpfx Aoiph Ukoglerr

Condition: like new (used), Year of construction: 2001, CNC rotary table for Mazak machines. Manufacturer: Kitagawa, model RS 20. Lrjdpfx Aszumu Iogljr

Condition: used, Year of construction: 2000, x-travel 1120 mm y-travel 510 mm z-travel 510 mm Ljdjztfu Djpfx Aglorr control Mazatrol 640 M

Condition: used, Year of construction: 2003, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Lrsdpfx Agoztfuweler control Mazatrol 640M