Used Mazak Quick Turn 8 for sale (308)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L Bodpjy S Sw Sofx Agdsdf • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm Bodpfjyg N Shsx Agdodf spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video: Bjdpfx Aszg U Tpogdedf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Bdodezg U Akjpfx Agdef Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis Bdedpswaikxjfx Agdjf 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Bsdpox S Hm Ijfx Agdjdf Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Bdsdpfx Ageyyybhedsf Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Bdjdpeyyxlfofx Agdjf Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Bdodpfx Asw Rm Diegdof Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Bjdpfx Agjwpufgsdjdf Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2016, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Make: MAZAK Type: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Bsdpfjyrcxljx Agdsdf Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm Bdjdpfxevgcpvj Agdef B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Bsdpfx Agjyyxh Tedjdf Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features Bsdpfozal Rasx Agdsdf - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: used, Year of construction: 2002, turning diameter 280 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 309 mm z-travel 330 mm turning speeds 4000 U/min feed 30 m/min Bjdpfx Agezdu T Dodedf number of tools 12 bar loader ja total power requirement 24 kvA weight of the machine ca. 3,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece weight (max.): 700 kg, controller manufacturer: Mazatrol, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, controller model: Matrix Nexus, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Bsdpfx Agoy N Addsdedf Magazin capacity 80 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, overall weight: 8,900 kg, table length: 550 mm, table width: 1,300 mm, controller model: 640 M, spindle speed (max.): 6,000 rpm, spindle speed (min.): 25 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Bdsdpfjy Nz Etox Agdsf Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Bdedpfx Aoy Nytpegdof Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCN410 was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 410 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN410 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 410 mm • Spindle taper: No. 40 (CAT 40) • Rapid traverse (X/Y/Z): 36 m/min • Spindle motor: AC 18.5/15/11/7.5 kW Bdodpfxey R D N Rj Agdof • Power supply: 3-phase, 200 V, 50 Hz • Rated capacity: 28.3/23.32 kVA • Compressed air: 5 bar / 200 l/min • Floor space: 2,000 x 2,600 mm • Standard equipment: flood cooling, tool life monitoring, worklight Additional equipment • Chip conveyor (hinge type) • Coolant tank • Chip bucket

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Bdodpfx Aoy Nlv Nogdjf Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Bsdpfxov Tvive Agdsdf Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm Bsdpfx Agjtqqk Iedsdf numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 total power requirement kW weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions Bdodox Enlropfx Agdsf • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 430 mm Additional equipment • On-board tool presetter Bdodpfx Agsy Ncyfjdjf • Through-spindle coolant (refrigerant inside the spindle)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW Bdedpfxoy I Amvj Agdjf • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran