Used Mikron Vce 600 Pro for sale (189)

Condition: ready for operation (used), Year of construction: 1999, controller manufacturer: HEIDENHAIN, controller model: TNC 410 / 426, This 3-axis MIKRON UM 710/900 was manufactured in 1999. It features a TNC 410/426 control unit, operates on a 3-phase, 400 V, 50 Hz power supply, and has a machine weight of 5,000 kg. Rated for a 50 A current with a connected load of 15 kW, it adheres to CE certification standards. Consider the opportunity to buy this MIKRON UM 710/900 vertical machining centre. Contact us for more information about this machine. • Power supply: 3-phase, 400 V, 50 Hz • Rated current: 50 A • Connected load: 15 kW Rodpfx Ajx U Tgyoglon • Weight (kg): 5000 • Electrical diagram no.: 152.53.80.1x2 • Sound level: 75 dB(A) • Certification: CE

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Redpeviq U Esfx Aglen Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min Rjdjx H Ntaspfx Aglon B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: ready for operation (used), Year of construction: 2007, Always in connection. SPECIAL GRAPHITE WITH EXTRACTION UNIT INCLUDED • 5 axes• 42,000 rpm spindle• 21-pallet Erowa changer • HSK63 Rsdpfsx Dihvjx Aglon • Year 2007 • 40,000 h • No coolant - Used for graphite• Heidenhain 530i control• Extraction unit INCLUDED

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Rsdpjyfpgiefx Aglen Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 40 rpm, X-travel: 560 mm Y-travel: 500 mm Rjdoyfnciopfx Aglsn Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch Rjdpfx Agorcnm Nolsn -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Redpfx Aekzpm Hogljn -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board Rjdpek Aua Nsfx Aglon -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm Rodpowcyk Ujfx Agljn -Weight: 15 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 Rsdpfxofbma Ns Agljn -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V Rsdokyy Uqjpfx Aglon -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos Rsdpfspz Sf Ejx Agljn -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm Redpfx Aekvrqisglsn -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos Rjdpjwd N S Defx Aglen -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 Redewcyq Ijpfx Aglsn -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, geared motor, electric motor, three-phase motor -Manufacturer: Siemens, permanent magnet motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-OAC01-Z Rodpfx Askxhpujglen -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motor available -Price per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), PLC control, mains filter, mains filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg Rsdpfx Asrbm Uhjglon

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A Rsdpfx Aswcyngeglen -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A Rsdpfxokzpngo Aglon -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg Redpsprb Dvefx Aglsn

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 Rjdpfxjxfb E Ao Aglen 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,170 mm, travel distance Z-axis: 700 mm, table width: 850 mm, table length: 1,000 mm, rotational speed (max.): 24,000 rpm, 1. MAIN MACHINE DATA Control: HEIDENHAIN iTNC 530 Number of Axes: 5-axis Travels: X-axis: 1,350 mm | Y-axis: 1,170 mm | Z-axis: 700 mm Spindle: Manufacturer: STEP-TEC (motor spindle) Max. speed: 24,000 rpm Tool holder: HSK63 Table & Pallet System: CNC rotary table with swiveling spindle 3-position pallet changer (APC) Pallet size: 1,000 x 850 mm 2. TOOL MANAGEMENT & AUTOMATION Tool magazine: 238-position high-capacity magazine Magazine design: 5-level rack system Cooling system: BMF belt filter system with ICS (internal coolant supply) Workpiece measurement: probe from RENISHAW Enclosure: full guard cabin 3. TOOL AND ACCESSORY PACKAGE (Included) Storage systems: 1x tool cabinet (4 drawers, 1 door) 2x table trolleys 1x telescopic drawer cabinet (11 drawers) Clamping devices & fixtures: Rodpjycr Uwjfx Aglen FCS Breil zero-point clamping system 3x grid plates (grid spacing: 25 mm)

Condition: used, functionality: fully functional, Mikron WF 21 C Brief description: CNC tool milling machine Rjdpfx Aox Scvfjglsn Description: Immediately available from site due to business closure: CNC tool milling machine Mikron Model WF 21 C Year of manufacture: 1980 Control: Heidenhain TNC 155 Table: 800 x 460 mm Travel X / Y / Z: 500 / 500 / 400 mm Tool holder: SK 40 Spindle speeds: 24 - 3150 rpm Weight: 2.2 t

Year of construction: 1999, condition: excellent (used), Working travels 710x500x500mm Table size 1080x580mm Spindle taper 40 Spindle speeds -10000 rpm Tool changer 30 Pos. Control HEIDENHAIN TNC-430 Coolant through spindle Rodpfjd Hftxex Aglon MARCELS MASCHINEN CH