Used Nesting for sale (294)

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00040876, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Automatic edge banding machine SCM ME 40TR in CE version, manufactured in 2026. Equipped with a glue pot and features compliant with European directives, including a rectifying unit and a special rounding saw unit. Features include: a saw unit with an automatic on/off system, a scraper with an automatic on/off system, a brushing unit, a glue scraping unit with an automatic on/off system, an automatic strip feed system with a magazine, a glue pot for polyurethane adhesive with rapid discharge, an infrared lamp, an anti-stick unit, a spraying system for finishing the edge band, a “Nesting” copy unit for the routing unit and for the edge band scraper, and internal lighting. The optional edge band scraping unit is designed for processing edge bands thicker than 1 mm. Gjdpfxjz Nlmqj Al Uebu

Condition: used, Year of construction: 2014, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 3,400 m³/h, noise level: 71 dB, overall weight: 425 kg, extraction connection diameter: 200 mm, nominal flow rate: 3,400 m³/h, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer this used Höcker Polytechnik VACUMOBIL 200 mobile exhaust system, year of construction 2014. Manufacturer: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jet cleaning (compressed air filter cleaning) The JT version is an upgraded version of the VT (vibration cleaning) version. The JT200-L is ideal for continuous use (CNC, planing line, nesting) Gbodpfxjygw Iqs Al Uju Better continuous operation Less maintenance during intensive use Type of input current: three-phase Negative pressure: 2.900 Pa Volume flow: 3.400 m³/h Overall weight: 425 kg Input voltage: 400 V Suction socket: 200 mm Power: 4 kW Rotational speed (max.): 3,000 rpm Input frequency: 50 Hz We also sell our JT300-L model on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Gedpjzb Aicefx Al Uebu Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW Godpfx Aey Avg Eol Ujbu • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life Gbsdpoy Snwnefx Al Uou - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, punching force: 30 t, total height: 2,220 mm, total width: 5,210 mm, total length: 6,050 mm, working range: 2,540 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,540 mm, punching diameter: 25 mm, workpiece weight (max.): 170 kg, overall weight: 15,000 kg, Maximize your sheet metal fabrication efficiency with this heavy-duty, high-precision Baykal BPM-TE 1525x30 CNC Punch Press. Engineered with an ultra-rigid "O" Frame design, this industrial workhorse offers unparalleled stability, minimizing frame deflection even under full-capacity operations. Equipped with premium Rexroth servo motors and linear guides, it delivers blistering speeds up to 900 strokes per minute and up to 1G acceleration—perfect for high-volume production runs and precise part creation. Manufacturer: Baykal Makina Model: BPM-TE 1525X30 Condition: Excellent / Fully Operational (Used) Location: Plovdiv, Bulgaria Availability: Immediate Technical Specifications Punching Force: 30 Tons (300 kN) Working Range (X x Y): 2540 mm x 1540 mm (Without repositioning) Maximum Sheet Thickness: 6.4 mm Maximum Workpiece Weight: 170 kg Maximum Punching Rate: 900 hits/min (1mm pitch nibbling) / 360 hits/min (25mm pitch nibbling) Turret Capacity: 12 Stations Indexable Stations: 3 x Indexable "D" Stations Maximum Punching Diameter: 88.9 mm Axes Layout: X, Y, Z, C1, C2, T Positioning Accuracy: ± 0.1 mm Repeatability: ± 0.04 mm Combined Axis Speed (X+Y): 128 m/min Key Features & Machine Benefits Finite Element Analysis (FEA) Optimized Frame: The stress-relieved, normalized O-frame ensures structural integrity, flawless punching accuracy, and a prolonged tooling life. Advanced CNC Control Unit: Powered by an ergonomic, free-standing Bosch MTX CNC control system with a 15.6" TFT Windows screen for simple programming and high machine availability. Gedpfxszcb Exo Al Uebu Smart Nesting Software: Includes Lantek Sharp Punch software for offline programming, automatic nesting, and fast DXF file importing to drastically reduce material waste. Material Protection Table: Features a smart combination of a moving table with ball transfers and brushes to prevent scratching on delicate sheet surfaces. Heavy-Duty Work Clamping: Fitted with pneumatically operated sheet clamps featuring a sliding system and sensors to eliminate material slippage and prevent sheet jamming. Integrated Production Aids: Built-in work chute with a mobile storage box for small parts collection, automatic lubrication system, and waste collection box. Safety Features: CE certified, equipped with warning lamps and light barrier safety curtains.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: a complete iGolden 02P-WVQ 4-axis nesting CNC production line from 2023, designed for automated cabinet and furniture production. The installation consists of four interconnected components that together form a continuous production line: 1. Automatic sheet lift 2. Automatic labeling machine 3. 4-axis CNC nesting machine 4. Automatic unloading and output table The line automates the loading, labeling, processing, and unloading of sheet material. This reduces manual handling and allows for the creation of an efficient and streamlined production flow. Included in the delivery: - Dust extraction system Gbodpfx Aev Dupvel Uou - Vacuum pump for the CNC bed - ISO30/ER32 tool holder - Haixun Quick Design 3D cabinet software - Haixun Quick Production production software - Spare parts - Stock of labels Dimensions: - Control cabinet: approximately 80 × 60 × 190 cm - Dust extraction system: approximately 140 × 80 × 140 cm - Labeling machine: approximately 4,000 × 2,700 × 1,800 mm A complete solution for companies that want to automate sheet metal processing and cabinet production, from sheet input and labeling to CNC machining and output.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8800x2100x2100 mm Weight 6000 kg Total power requirement 18-36 kw Gbedpfev A Hcfjx Al Uju

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (including touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (including DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir system including adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius trimming blade; flat trimming blade (including pneumatic feed); cleaning station; 1 free space for a 2nd milling station or a groove cutter (groove cutter only if the cleaning station is removed); robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, pull-out workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Gbjdpfx Aszvhk Hsl Uju Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change system for corner cutter K36, 1 unit, surcharge for multi-radius trimming blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spraying device, plate K36, 1 unit, cleaning agent spraying device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius trimming blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the infeed and outfeed support by 440 mm each, 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support area for improved workpiece handling by 450mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter 24.1 mm, 1 unit. Ball bearing for corner rounding cutter 24.2 mm, 1 unit. Packaging surcharge, 1 unit. Additional quick-change reservoir including level sensor. Manufacturer: Hebrock, Type: 36/14/1, Article No. H36/14/1, 1.00 unit. Additional changeover motor for corner cutter K36. Manufacturer: Hebrock, Type: 36/08/2, Article No. H36/08/2, 1.00 unit. R1 Storage location: Nattheim.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of axes: 5, spindle motor power: 8,500 W, CNC Wood Machining Centre manufactured in 2005. This SCM Record 110AL features a working area of 3,060 mm in the X-axis and 1,240 mm in the Y-axis, with a maximum panel passage of 200 mm. It includes 18 total drilling spindles and a powerful 8.5 kW main electrospindle. If you are looking to get high-quality drilling and milling capabilities, consider the SCM Record 110AL machine we have for sale. Contact us for further details. • Processing type: Drilling and milling • Max. panel passage: 200 mm • Number of working fields: 2 • Table type: Flat table • Table configuration: Nesting Gbsdpfx Alez Iy N No Uju • Table dimensions: 3,060 × 1,240 mm • Number of controlled axes: 5 • Drilling units: 1 • Vertical drilling spindles: 12 • Horizontal drilling spindles, X-direction: 4 • Horizontal drilling spindles, Y-direction: 2 • Total drilling spindles: 18 • Milling spindles: 1 • Milling spindle controlled axes: 5 • Spindle cooling: Liquid cooling • Grooving units: 1 • Grooving unit: Fixed, X-direction • Main electrospindle power: 8.5 kW • Milling spindle power: 8.5 kW • Control: PC Control • Programming software: Xylog Plus • 16-position tool magazine • Automatic tool changer • CE marking Additional equipment • Vacuum pump: 1 (suction capacity 250 m³/h) • Suction cups for workpiece clamping • Front safety mats

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Gedpfxjw Nadgs Al Uebu Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, number of axes: 5, This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Additional equipment • Smart Abrasive Reserve Tank Included • Tank Capacity: 350 kg • Tank Pressure: 6 bar • Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Machine Benefits Technical Machine Benefits • Axes: 5-axis waterjet cutting machine • Cutting size: 4000 × 2000 × 250 mm • Type: cnc 5-axis, bridge type • Step accuracy: 0. 01 mm • Controller: esa 5-axis controller with ethernet, usb, and manual handwheel (x/y/z) • Cam program: semi-automatic nesting / automatic input-output system • Rapid traverse speed: 30000 mm/min Extra Information Condition: Very good technical condition, low number of working hours Movement Axis Motors: X-axis: 1 × 3.2 Nm servo motor Y-axis: 2 × 3.2 Nm servo motors Gbodpfx Ajzbcmhjl Uju Z-axis: 1 × 1.6 Nm servo motor with brake A-axis: 1 × 1 Nm servo motor with brake C-axis: 1 × 1 Nm servo motor with brake Transmission System: Helical hardened racks and pinions Linear Bearing: THK linear slides and rails Injection Unit High Pressure Pump: MJT-4000 Operating Pressure: 4000 bar constant (24h non-stop) Motor: 50 HP / 37 kW, 1500 rpm, 50/60 Hz High Pressure Flow Rate: 2.3–3 L/min Pressure Adjustment: 1000–4000 bar in 500 bar steps Orifice Diameters: 0.18 / 0.25 / 0.30 / 0.35 mm Hydraulic Pump: 71 cm³ (103 L), axial piston pump max. 200 bar Cooling Water Flow: 30 L/min Optimum Water Inflow: 4 bar Adjustable Pressure Water Pump: 10–16 bar

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Gbsdszvn Thspfx Al Usu Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Godpfox E Ah Ijx Al Ujbu Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Gjdjuqw E Njpfx Al Uobu Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar Godpfx Aszmitkjl Uobu - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm Gbsdpew I U Ecofx Al Ueu (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: ready for operation (used), Year of construction: 2020, overall weight: 1,080 kg, total width: 1,960 mm, total height: 1,500 mm, table length: 3,020 mm, table width: 1,520 mm, travel distance X-axis: 3,020 mm, product length (max.): 3,560 mm, table load: 400 kg, number of axes: 2, Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine. • Cutting Area: 3,020 × 1,520 mm • Operating Voltage: 230 V • Phase: 1 Ph • Power Consumption: 300 VA • Maximum Table Load: 400 kg • Maximum Plate Thickness: 50 mm • X-Axis Guide System: Hardened Precision Round Steel Guides with Adjustable Rollers • Y-Axis Guide System: Profile Rail Guides • X-Axis Drive: Reinforced Timing Belt (5M15) • Y-Axis Drive: Reinforced Timing Belt (2 × 8MR30) • Gantry Drive: Dual-Sided Drive with Rigid Coupling Shaft • Positioning Speed: 24 m/min • Repeatability: Better than 0.1 mm • Control Software: CNC-Workbench Plasma • CAD/CAM Software: CNC-Workbench Plasma • File Format Support: DXF • Plasma Power Source: Hypertherm Powermax 105 Sync • Plasma Power Source Voltage: 400 V • Maximum Cutting Current: 105 A • Piercing Capacity: 22 mm • Maximum Severance Capacity: 44 mm • Duty Cycle at Full Load: 80% • Process Gases: Air, Nitrogen • Manual Torch Connection: Optional • Water Tank Capacity: Approx. 300 L • Exhaust Connection Preparation: DN 150 mm • Portal Clearance: 300 mm • Laser Pointer: Yes • Torch Height Control (THC): Automatic Arc Voltage Control • Operating System Requirement: Windows XP / 7 / 8.1 (PC Not Included) Godszrnwxopfx Al Uebu Additional Equipment • Water Tank • Rittal Operator Panel • PC with Installed Control Software • Hand Control Unit • Operating Manual • Serial Connection Cable • Consumables Kit • Hypertherm Powermax 105 Sync Plasma Power Source • Automatic Nesting Module (License for One PC) • Laser Alignment • Scribing Option • Fume Extraction Bridge Preparation (DN 150 mm) • Portal Height Extension to 300 mm Clearance

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 101850, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse (X): 60 m/min - Z-axis travel: 200 mm / Rapid traverse (Z): 30 m/min - Y-axis travel: 40 mm / Rapid traverse (Y): 30 m/min Gjdpfxexvyh Re Al Ujbu - Standard enclosed automation (number of loading nests according to workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Carrier With Live Tools - Cylindrical shank holders per DIN 69880: 12 – VDI40 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical System - Operating voltage: 400–480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features & Capabilities: - Vertical design: Ensures optimal chip evacuation and easy part handling. - CNC control: GE Fanuc Series 18i TB. - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm with Heidenhain linear scales. - Main spindle: Delivers high power and a wide speed range. - Automated loading/unloading: Integrated automation system for parts feed and retrieval. - Live tooling: Supports live tools for extended machining operations including drilling and milling. - Chip conveyor. Machine Condition: NOT WORKING - Live tool drive motor - X-axis optical scale - Z-axis optical scale - Z-axis belt - Z–X-axis servo drive - X, Z-axis optical scale cables - Coolant pump

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: Gedpfxjzhbf Uj Al Uobu • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor Gbodpfxjxxkh Tj Al Usu - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Gsdpoyyb Icofx Al Ujbu Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107964, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 - BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions: Length = 4350 mm with chip conveyor, Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Enables optimal chip evacuation and easy loading/unloading. Gsdjxw Srkopfx Al Ujbu - CNC Control: GE Fanuc FS 32i B. - High Precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - In-process Measurement: Equipped with Marposs T25 measuring probe. - Automated Loading/Unloading: Integrated automation for part loading and unloading. - Live Tooling: Capability for driven tools expands machining to drilling and milling operations. - Tool Life Monitoring: Sister tool management for tool life tracking. - Chip Conveyor - Fully Enclosed Work Area with Work Area Lighting - Documentation: Electronic available; hardcopy/incomplete book. Machine Status: NOT OPERATIONAL - Cooling pump x2 units - Live tool drive motor - Lubrication pump - Operator panel - touchscreen needs replacement - Hydraulic block valves x3 - Hydraulic loading door cylinder - Rotary joint - Lubrication pressure switch - Safety door, Euchner type

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B Gbsdpfxoxw Svio Al Uju - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: Gedpexxip Aofx Al Usbu - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement