Used Packet Saw for sale (5,734)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Chedpfx Aevrvq Doqvsd Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: used, Technical details: Chjdpfxsu Nigws Aqved saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system Chedpfsu Niuzsx Aqved *

Condition: used, Year of construction: 1979, Technical details: Codou Niu Ujpfx Aqvehd throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. *

Condition: used, machine/vehicle number: G-ME125419aP, Metal band saw Optimum S130GH, 0.25 kW, 78 kg Prices subject to change, errors, printing and typesetting errors reserved Chsdpfx Aovw Edkeqved

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Codpfsv Erkajx Aqvehd Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: used, Year of construction: 1970, machine/vehicle number: 251, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 380 V, input current: 36 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 180 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, saw blade bore: 55 mm, rotational speed (max.): 2,920 rpm, Used, functional underslab multi-blade saw "SENDEN" with mounted feed unit "ROMA" Spindle diameter 45 mm, incl. 4 saw blade clamping sleeves with 55 mm diameter (suitable for circular saw blades with a 55 mm bore). No spacer rings or saw blades are included. Drive motor 36.5 A / 18.5 kW. 2920 RPM. The machine is designed for a cutting height of up to approx. 80 mm. Saw blades of approx. 250 - approx. 400 mm can be used. 4 clamping sleeves are included in the scope of delivery. Csdpfx Ao Agu Txjqvjhd Original technical documentation is not available. Please refer to the photos! Sale is as is. No warranty for defects. The machine can be inspected (power is connected). Mounted 4-roller feed unit ROMA Type DVPF 0810-4/2 with ribbed feed roller rollers. Feed speeds can be directly selected. Electrical power 0.88/1.25 kW.

Condition: used, Year of construction: 2000, without mounting table, roll diameter: 800 mm, stand side on the left, belt guide at the top and bottom, APA motor: 4.0 kW with motor brake and emergency stop switch, cutting speed: 1650 m/min, cutting height: 390 mm, cutting width: 780 mm, blade length: max. 5600 mm, weight: approx. 500 kg, dimensions: 1310 x 950 x 2380 mm. Codpfxo Aay Ebo Aqvohd Location: n

Condition: good (used), Year of construction: 1998, Panel saw with a maximum cutting length of 8 m. Maximum cutting width: 120 cm. Saw motor: 15 kW. Maximum cutting height: 140 mm. Overall length: approximately 9.5 m. Overall width: approximately 1.8 m. Chjdpfx Ae Agw Tgoqved

Condition: used, Year of construction: 2001, functionality: limited functionality, overall weight: 250 kg, Eisele VMS350-PV: The safety switch for the protective cover on the machine is defective; the rest of the machine functions perfectly. Coolant is supplied via a pump for additional minimum-quantity lubrication. Codpfx Ae Ahhkreqvjhd Additionally, there are 3 roller conveyors. For sale due to business closure. No guarantee. Excluding liability for material defects.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03 267989, spindle motor power: 5,100 W, Equipment: saw blade guard, Radial cutoff saw designed for precise cutting of wood, composite materials, and materials with similar properties. The saw's main advantages are its high cutting accuracy, the ability to swivel the guide arm to both sides, and the tilting of the saw head. The smooth operation of the cutting unit is ensured by eight bearings, which are guided at an angle of 45° along steel guides. Max. blade diameter: 400 - 450 mm Cutting height: 125 - 150 mm Arm length: 1100 mm Csdpfxezu Rv As Aqvohd Motor power: 5.14 kW Cast iron arm, swiveling +/- 60° Tilting saw head +/- 45° Rotating head +/- 90° CE safety standard Weight: 375 kg Year of manufacture: 1999

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available - Chodszzfr Ejpfx Aqvsd

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit In wooden box Chodpfx Aovluwvsqvjd Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg - available immediately -

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm Chsdpo Ahfcxsfx Aqvjd 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: new, Year of construction: 2024, ZENZ ECOLINE – not operational in 2024 7m cutting length 100x130 cm throat capacity 95cm cutting width 22 kW electric motor Codpfxj Ahgyte Aqvshd 6000x100x1.1mm blade 850mm saw blade roller diameter Joystick for feed and lift with electronic position control Debarker Water lubrication 4 side supports 1 manual side support 3 log lifters 2 log turners 1 log holding arm 3 level compensation systems with clamps 1 log roller Mobile system with 4 wheels and brakes, German homologation 3.5 t

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Sliding table length: 3200 mm Cutting width with parallel fence: 1050 mm Chedpfx Aqj Ahhmiovod Motor power: 7.5 kW Scoring unit Height and swivel adjustment via foot-operated hydraulic system Digital display for parallel fence Duplex miter fence The machine will be available from January 2027.

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides Cjdpfsw D T Dksx Aqvohd T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, Chodpfxo Ahm R Ts Aqvjd right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Year of construction: 2026, condition: new, functionality: fully functional, Double head sawing machine with 5 controlled axes for compound angles FOM INDUSTRIE KEOPE E5 6,6m Year: 2026 Condition: new (showroom machine) Standard configuration: Chsdpfxeztr Rrj Aqved ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm blade speed: 2800 rpm CE marking 400 V Chsdez E H Hcjpfx Aqvod safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011

Condition: excellent (used), Catalog number: 7885 TECHNICAL DATA - Max. main blade diameter: 400mm Cedpfx Aqeztavievshd - Max. cutting height: 120mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30mm - Cutting length on the carriage: 1400mm - Cutting width with guide: 1300mm - With a sliding carriage - Guide on the sliding carriage adjustable at an angle - Main blade motor power: 4kW - 2 types of rotational speeds: 3000/4500 rpm - Table dimensions: 1120x1020mm - Table dimensions with extension: 1630x1730mm - Diameter of the dust extraction port: 80mm, 140mm - Dimensions (L/W/H): 3300x2180x1450mm – weight: 1040kg ADVANTAGES – Made in Poland – DTR documentation available – Used saw - Very good condition Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 250 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 100 mm Manual height adjustment of the saw blade Tilting saw blade, adjustable from 0° to 45° Manual adjustment of the saw blade tilt angle Table length: 1600 mm Table locking mechanism Dust extraction port diameter: 120 mm Guide Safety guard Safety switch Chsdpfx Aj Ahyxmjqved Power supply: 400 V Main motor power: 4 kW Overall dimensions: Length: 1600 mm Width: 2900 mm Height: 1100 mm

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine comes from the renowned Swiss manufacturer STRIEBIG, a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is fully functional and ready for use. It is currently in use at our company and can be inspected while in operation. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Saw blade diameter: Recommended: 300 mm Minimum: 290 mm Saw blade speed: 4750 rpm Vertically moving cutting carriage Mechanical pre-cutting device Original chip extraction system Robust steel construction Chsdpfszizy Ijx Aqvsd Precision guides Panel stops Clear control panel Safety switch Working area Based on the photos: Cutting length approx. 5300 mm Cutting height approx. 2200 mm (Please provide exact dimensions if required). Technical condition 100% operational Ready for use without any additional work Regularly serviced Can be tested during operation Very precise and stable Application Ideal for cutting: Furniture panels MDF Plywood OSB boards Laminated boards Plastics

Condition: used, Technical specifications: Saw blade diameter: 300/350/400 mm Scoring saw diameter: 120 mm Manual saw blade height adjustment Tilting saw blade, adjustable from 0° to 45° Manual saw blade tilt angle adjustment 3 speeds: 3000/4000/5000 rpm Table length: 1700 mm Table locking mechanism Safety switch Power supply: 380 V Motor power: 3 kW Overall dimensions: Length: 2100 mm Width: 2100 mm Height: 1000 mm Chedpfx Aqo Ahyq Usvod

Condition: reconditioned (used), Year of construction: 1991, A Kaltenbach cold-cut saw is for sale. The machine has been completely disassembled and reassembled. During the overhaul, the gearbox, motor, and hydraulics were refurbished. The table was resurfaced and fitted with new bearings. The gearbox is free of play! Type: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Cods Ahz Dxjpfx Aqvehd Rapid traverse in/out: 1,550 mm/min Maximum workpiece size: 130 mm Workpiece size for square material: 120 mm Workpiece size for flat material: 305 x 20 mm Workpiece size for round material: 130 mm Minimum workpiece size: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.