Used Packet Saw for sale (5,735)

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm Dcsdpfxj Abaqys Ak Asp - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Dodpfx Akszfwfxo Aecp Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: used, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Year of manufacture: 2011 Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Dodjz H T U Aopfx Ak Ascp Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - CE marking present: Yes - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2005, condition: excellent (used), CATALOGUE NUMBER 8004 TECHNICAL DATA - max. disc diameter: 350 mm - disc bore diameter: 30 mm Dcjdpezxhhqjfx Ak Ajp - mitre cutting capability: 45° - max. cutting height: 100 mm - max. workpiece width: 100 mm - mitre cutting: right/left - dust extraction port diameter: 2x80 mm - motor: 3.7 kW - machine dimensions (L/W/H): 1830x760x1610 mm - weight: 308 kg ADVANTAGES - Suitable for cutting window frame strips - Used saw - Very good condition Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2015, Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring saw: Yes Feed: manual Horizontal cut display: Scale Vertical cut display: Scale Saw blade diameter: 250 mm Adjustable material support: Yes Saw blade speed: approx. 5200 rpm Motor power: 3 kW Machine length: 5500 mm Machine depth: 1500 mm Dedpfj Af Hmvsx Ak Ajcp Machine height: 2900 mm Weight: 1200 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1966, Wagner metal band saw - Control unit with analog counter - Band length 5,000 mm - Front-mounted guide rollers - Semi-automatic tensioning device - Chip conveyor Dcedpfxs Adz E Re Ak Aep

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - shaft width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed shaft - pawls - saw shaft - sliding, pressure shaft From below: Dcodpfe Agur Nex Ak Aop - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw shaft lifting - electric body lifting - stepless feed speed adjustment - dust extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approx. 4000kg ADVANTAGES – Czech production – used multi-blade saw – very good condition Net price: 30900 PLN Net price: 7190 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2008, machine/vehicle number: .080356001, with miter cut, roller feed, and pneumatic clamping. Dsdpfx Akj Af Nk Ns Aocp

Condition: excellent (used), CATALOGUE NUMBER: 8138 Technical specifications: - Guide rail length: 2000mm - Cutting length: 1850mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide rail - Electric motor: 11kW - Dimensions for transport (length/width/height): 1800x1100x2700mm - Dimensions for transport (overall): 3900x1100x1900mm - Weight: approximately 300kg ADVANTAGES - Made in Germany - Suitable for cutting packs or roundwood - Mobile, on wheels - Used saw, very good condition Net price: 23,900 PLN Net price: 5,558 EUR, depending on the exchange rate of 4.30 EUR Dedpfx Ake Ahndqe Aecp (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm Dcedeztzc Djpfx Ak Aep - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Code: 0516 Brand: OMS SALVARANI - ITALY Model: FC 300 R SUPER - CE Standard Cut-off saw with dust extraction base for cutting frames, wooden and aluminium profiles, joinery, furniture, fittings, Pvc, plastics and various other materials – CE Standard Technical specifications: Blade diameter mm 300 Hole 30 Djdpfx Ako Ah H Ias Aecp Revolutions per minute rpm 2800 Three-phase motor power 2,5 Hp Cutting capacity 110 x 140 mm Base with dust extraction system Overall dimensions mm 800 x 600 x 1,400 h Weight kg 80

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Dcjdpez Hb Nbofx Ak Aop

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Functionally tested Equipment and technical data: Cutting length: 4,300 mm Cutting height: 2,200 mm (edge trimming height 2,100 mm) Dcsdpfx Aks Adv Rze Asp Saw unit 4 kW TRK device Manual length stop Middle support, fold-out, continuous Location: NRW (North Rhine-Westphalia) Availability: Short-term

Condition: used, Year of construction: 1990, Semi-automatic cold-cut circular saw Manufacturer: Eisele Model: VMS-III-S-PV Year of manufacture: 1990 Serial No. 2144 Used Technical data: Saw blade diameter: 350 mm max. Miter cuts: 30-90° Cutting capacity, straight cuts: Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Cutting capacity, miter cuts: Flat material: 140x90 mm Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Rotational speeds: 34/68 rpm Weight: 450 kg. Dcsdpo Ah Dqqsfx Ak Ajp

Condition: repair required (used), MZ Project LC 5000 – longitudinal cutting saw Dedpfs Af Uu Rsx Ak Ajcp Cutting length: 2000 mm Machine intended for spare parts.

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Dcsdpfxo Adv Rus Ak Ajp Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: used, CATALOGUE NUMBER 7585 Technical data: - Wheel diameter: 630mm Dcjdpfjzx R Ugsx Ak Ajp - Table dimensions: 850x810mm - Table adjustable in angle - Motor: 3kW - Max cutting height: 320mm - Blade-to-body overhang: 600mm - Diameter of dust extraction port: 90mm - Brake - Dimensions (L/W/H): 1300x830x2050mm - Weight: 420kg Advantages: - Polish production - DTR documentation - Very good condition - Used saw Net price: 8500 PLN Net price: 1977 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 8048 TECHNICAL DATA - max. disc diameter 400mm - disc bore diameter 30mm - disc guard - cutting height 100mm - max. cutting width 640mm - possibility of angled cutting in the vertical plane - arm adjustment or disc adjustment - arm rotation capability: right/left - motor 400V, 3kW - table dimensions 1600x950mm Djdjzx Sqpopfx Ak Aecp - dust extraction nozzle diameter 60, 100mm - dimensions (L/W/H) 1500x1600x1500mm - weight 240kg ADVANTAGES – Made in Italy – Unpainted – DTR documentation included – Very good condition – Used saw Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2008, functionality: fully functional, miter ja Dcjdpoyacp Tsfx Ak Ajp cooling ja weight of the machine ca. 400 kg

Condition: used, Year of construction: 2009, Bandsaw machine used Manufacturer: MEBA Djdpfxe Ah Dt Te Ak Ascp Model: 335 DGA Year of manufacture: 2009 Serial No. 7548 Technical data Design: CNC Autocut 45° left Ø 305, 305x335 mm 90° Ø 335, 500x335 mm 45° right Ø 335, 3220x335 mm 30° right Ø 180, 170x335 mm Motor: 3.0 kW Saw band: 4400x34x1.1 mm Band speed: 15-150 m/min Smallest diameter: 5 mm Working height: 750 mm including new: Infeed roller conveyor, 6 m long Outfeed roller conveyor, 4 m long

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Dcodpszhm Dpsfx Ak Aep Weight: 1200 kg

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Dcodpj Aggbxefx Ak Aop Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: new, CATALOGUE NUMBER RE041 - new machine Djdpfo Aggdzex Ak Ajcp TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2006, functionality: fully functional, 5 HEAD STENNER MHS9 HORIZONTAL RE SAW LINE. This complete 5 head line comes with 12 metre infeed and 8 metre outfeed. The line has 2 deburring station at the front and rear. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 5x 18.5KW Variable feed speed 15-60M/MIN Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All five heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. The line has power boards and control boxes. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. Djdozwh Hwopfx Ak Ascp This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: used, Year of construction: 1991, Automatic metal sawing machine with hydraulic workpiece clamping, automatic material feed, and control panel for series processing of metal profiles and solid materials. Manufacturer: KASTO Machine type: Fully automatic sawing machine Year of manufacture: 1991 Operating mode: Automatic Material feed: Automatic Workpiece clamping: Hydraulic Clamping device: Vise I and Vise II Dcjdpfx Ao Aiccaok Asp Feed: Adjustable rapid feed Operation: Central control panel Cutting length setting: Via preset counter Coolant system: Available