Used Peddinghaus 210/16 for sale (123)

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Giodoyrhyuopfx Aa Ajr Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Serial number: 350114786/01 Giedpfxoyxc Sms Aa Ajr If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Punch, punching machine, hole punch, eccentric punch Gedpfxjk D Nt Dj Aa Ajir -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Giodpfx Ajyuukxsa Aer Tube diameter (top – bottom): 70 mm – 90 mm Base plate diameter: 500 mm Approximate weight: 40 kg

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories Gedpjxp Ndhjfx Aa Asir - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; Giedpfx Aajpl Dyco Ajr drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Gjdpfx Asf Nwqaoa Ajir Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope.

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: approx. 5000 kg Gisdpfx Aasf Nwn Us Ajr

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm Gisdsu Ick Tspfx Aa Aer electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: used, Technical details: Gjdpfx Aaexu Dx De Aeir dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm Gisdpfxjhxzmcs Aa Ajr flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, hydraulic ja 100 t weight of the machine ca. 2,9 t Gsdox U A Tvepfx Aa Ajir

Condition: used, Year of construction: 1966, 5 Gedpsx U A Nkjfx Aa Ajir weight 5 t .

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health. Gijdshx Ekpspfx Aa Aor

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² Gsdpfx Aow U U S Noa Ajir - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with Godpovg R Rzsfx Aa Aoir foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l Gisdpfx Aegvkmnja Asr total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down Gijdjx Symnjpfx Aa Aer - tool package Validity of safety inspection until Feb. 2026

Condition: used, Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg Gijdpekx Sr Hjfx Aa Asr

Condition: used, Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg Gjdpfx Aasc Nlyxe Aeir

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm Gedpoddfh Eefx Aa Ajir -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm Gjdpfx Ascwn Eyja Aoir -Weight: 9.3kg

Condition: used, Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices Gedpjrfzthofx Aa Asir -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square Gisdpfx Aasc Nlyyo Ajr -Dimensions: 170/145/H235 mm -Weight: 14 kg

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available Gjdekvrpwepfx Aa Asir -Dimensions: 485/210/H190 mm -Weight: 26 kg