Used Pellet Line for sale (10,099)

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic Ijdpsyzhvvjfx Acljif sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 Iijdszcb E Sspfx Aclof 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). All equipment to be removed from the factory by the Buyer.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Iisdpfx Asi Dtbijcljf Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation Iijdpfx Acjwakktelof ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Iisdpfx Ajxazhteclsf

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, various critical wear parts were replaced, and the press unit was overhauled. Among other things, the following were replaced: ✔ New press chamber kit ✔ New piston ✔ New guide bushes ✔ New sintered bush ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals Ijdpfxszquixo Acloif ✔ Various fastening materials Service documentation available The original documents are included with the machine, including: Original ASCO service report Test results after maintenance This demonstrates that extensive work was carried out on the press chamber and hydraulic components. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features Iiodpfxexmrwfj Aclef • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Year of construction: 2003, power: 250 kW (339.91 HP), CPM 7930-4 Pellet Mill High-capacity pellet production machine manufactured by CPM. Designed for processing wood, biomass, animal feed and other pelletizable materials into pellets. The machine has been used for only one season and is in very good technical condition. Equipped with: Electric motor: 250 kW Mixer Feed screw conveyor Iiedpfx Acozlgxbjlof Complete set of rollers Die Manufacturer: CPM Model: 7930-4 Year of manufacture: 2003 A key machine for a complete pellet production line – ready for installation and operation.

Condition: excellent (used), Year of construction: 2015, operating hours: 355 h, Cold Jet Aero 75 DX Machine This machine is suitable for industrial cleaning, including small and large-scale projects. Its advantage is that it does not rely on new-generation electronics, making it one of the most robust machines on the market. This machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: COLD JET AERO 75 DX DRY ICE (335 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator Iijdpfezkq N Iex Aclsf 2 x Nozzles (NEW) This is one of the best machines in the world. It has no electronics, which is why it’s reliable and relatively inexpensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal using dry ice, coating removal using dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, Venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. Iiedpjzfbi Iefx Aclof The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Iodpfezk Dfpjx Acleif Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. Iodpjwum Svofx Acljif The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Ijdpfx Ajzl Tb Neclsif Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: used, Year of construction: 2002, An automatic Pfankuch collating and OPP film wrapping machine for flat products is offered. Max. film roll width: 600mm, max. film roll diameter: 250mm, film core diameter: 76mm, film thickness range: 15µm-40µm, max. production output: 100packs/min, product-dependent, top film material: polypropylene OPP/COEX/Cast, bottom film: polypropylene OPP/COEX. Dimensions: approx. 6000mm/1000mm. Documentation available. Inspection possible by arrangement. Iijdpfx Acezvgh Rolsf

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis Iijdpfx Acjzu Nyaelef TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. Ijdpfxoznlbge Acljif If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision We offer a complete Marel / Stork AMF-i filleting line, tailored for modern poultry processing plants. This system provides automatic and precise filleting of chicken breasts while ensuring maximum throughput and superior end-product quality. Key Benefits: Intelligent Filleting (Adaptive Filleting) The system automatically adjusts its settings to the size of the raw material, guaranteeing high-quality results and optimal yield regardless of product dimensions. Isdpfx Acex Hymdsleif High Production Efficiency Processes up to approximately 60 fillets per minute – an ideal solution for large-scale operations. Consistent Quality and Maximum Yield Losses are minimized, and efficient recovery of by-products (tendons, skin, meat) is ensured. Modular Design The line can be configured and expanded to meet individual production requirements. Process Automation Manual labor is significantly reduced, increasing consistency and process repeatability. Included Components: - Loader module - Filleting line with integrated measuring system (encoder) - Skinning module - Splitting module with automatic adjustment - Separation module - Tendon collection system - Original control cabinet Technical Specifications: Model: AMF-i Manufacturer: Stork / Marel Year of Manufacture: 2018 Capacity: up to 3,600 fillets/hour Condition: Very good / ready for operation Type: Chicken breast filleting line STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Iiodowg R Rtspfx Acljf

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Isdjzummqepfx Acloif Sheet dimensions: Length: 400-2200 mm (±1 mm) Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Siemens S7 control system.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 x Comas DP Depositor Type-800 8-lane (Serial no. 2614, Date of manufacture – 1997). Videos available on request. Iiedpfx Acezcaz Eolef All equipment to be removed from the factory by the Buyer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer Ijdpfex Sqxhox Acljif The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system Iiedozdr Iljpfx Acljf 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Year of construction: 1990, condition: used, We offer a used technological line for the production of ceramic products (Handle/Keller) characterized by exceptional durability and ease of maintenance. This line consists of the following machines and equipment: 1. Raw Material Pre-processing Machines - Edge Runner Handle R469, year of manufacture 1955 - Roller Crusher AGW 1065/1085, year of manufacture 1963 - Roller Crusher WF 1080A, year of manufacture 2005 - Belt Conveyors, 4 units - Control cabinet 2. Forming Machines - Mixer Handle MDVG 920B, year of manufacture 1990 - Press Handle PZG 56A/50, year of manufacture 1990 - Cutter Keller type 4155, year of manufacture 1990 - Belt Conveyors, 4 units - Control cabinet This line was in continuous operation until the end of 2025. Iisdey Nzpropfx Aclsf If you have any questions or require further information, please contact us by phone.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET A quality. Also applicable to all COLD JET blasting machines. Ijdpfx Acjztkv Hjlsif AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all parts in stock for these machines. Please contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Iiodpfx Acozrvh Eolof Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.