Used Pet Blow Moulding Machine for sale (93,607)

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition Prsdpfx Adekucxloyjc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Pedpexpyuwjfx Adyerc Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Additional Equipment Injection unit: 13000 kg Clamping unit: 9000 kg only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: used, Uniloy UR110 16 Head Reciprocating Screw Blow Moulding Machines (2x 2012) With Ancillary Equipment Each with: Uniloy Milacron RTM 4 trimmer (2012) Uniloy Milacron leakage control 5x Moretto hopper loaders 2x Moretto FC400PB filter units Shared between Uniloy blow moulders 3x Beccaria TV 2500 granule mixer dryer, 2,500L capacity Maguire WSB-940T gravimetric blender Predpfoxn N Abjx Adyec Moretto TLC 05S3 manifold Moretto VTS1120W60 side channel suction unit Tria BM90-42 granulator with acoustic enclosure (2014) Demag pillar jib crane

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Prsdpequuvrefx Adyoc AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment Predpfx Ajuiq Dhsdysc • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Prjdpfx Ajt Eu Azjdyec

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Prodpfx Adswa Rhroysc Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. Prsdpfxjg Ailce Adyoc MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: ready for operation (used), Year of construction: 2016, Used KHS Blow Molding PET Blowing Machine, Year: 2016, Type: Inno PET Blomax 10S, 10 cavities, Range of capacity 14.000 - 22.000 bph, Bottle Neck PCO 1810, now adjusted to 0,5 - 1,5 / 500ml - 1.500ml, optional PET bair conveyors available. Prodpowi Izzjfx Adysc

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Podpfjrazwrjx Adyerc

Condition: used, Year of construction: 2004, Bottling Blower, PET Blowing Machine KRONES Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport, year 2004) Model: Contiform S8 Year: 2004 Predpfx Adewuyt Toyoc Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety protections

Condition: ready for operation (used), Year of construction: 2004, Two injection blow molding machines for hollow body production are available. 1) Injection blow molding machine Kautex KB 15.10, year of manufacture: 1984, overhaul: 2005, stations: 1, nozzle diameter: 80mm, clamping force: approx. 250kN, opening stroke: 300mm/800mm, max. mold thickness: 2x160mm, max. mold dimensions X/Y: 950mm/600mm, control: Siemens S7, operating hours: approx. 96432h. 2) Injection blow molding machine Kautex KB 50/13-S, year of manufacture: 1983, overhaul: 2003, nozzle diameter: approx. 80mm, clamping force: approx. 410kN, plate dimensions X/Y: 700mm/900mm, mold thickness: 2x320mm, opening stroke: 600mm/1300mm, control: Siemens S7. Documentation available. On-site inspection is possible. Prjdpfx Ajwligwjdysc

Condition: new, Year of construction: 2025, functionality: fully functional, Full automatic pet blowing machine- linear Full Servo Drive. 4 cavities to 2000ml Podpjwrrcnsfx Adyerc Brand new blowing capacity 4000bph Low energy consumption

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. Prsdpfxst Akgws Adyoc The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000

Condition: used, Year of construction: 2006, functionality: fully functional, BLOWER SMI SR 8 Year: 2006 Speed: 12,800 BPH Model: SR 8 No. 8 cavities Bottle formats: 0.33 LT | 0.5 LT (Stamp included) Neck finish 29/25 Worked hours: 58,432 Chiller NOT included Psdpfx Adjwdumgeyorc Preform elevator/Orientator included Preform tipper included Safety protections

Year of construction: 2002, condition: ready for operation (used), Injection Unit Screw diameter 120 mm Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Application Types Pedpfx Asxn Uyrsdyorc Injection Moulding

Condition: good (used), functionality: fully functional, Capacity: up to 27,000 bottles per hour Prjdpfx Ajwxtu Ejdyec

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, paint mixing units and T-conveyor belt. Documentation available. On-site inspection is possible. Prjdpfx Adow Az Rioyec

Year of construction: 2015, condition: ready for operation (used), Injection Unit Shot weight 2424 g PET Media Power consumption 492 Wh/kg PET Additional Equipment Mold Dehumidifier: Incl. hood, spare parts package, piping Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Injection Unit Shot weight 2424 g PET Media Power consumption 492 Wh/kg PET Prsdpfowzc S Sox Adyjc Additional Equipment Mold Dehumidifier: Incl. hood, spare parts package, piping Conveyor Belt: Two-sided preform filling system for cartons/grid boxes This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, functionality: fully functional, The SMF COMBI 400 is an automatic blow molder designed for the efficient and high quality production of PET bottles. This machine combines advanced technologies to offer continuous, accurate operation with minimal manual intervention, ideal for bottling plants requiring flexibility and performance. ADVANTAGES OF HS AND COMBI SERIES: • Low energy consumption • Modular construction • Silent work • Space saving, compact design Pjdpfx Adswny Eijysrc • Easy change- overo f bottle size and types of neckrings • Advanced PLC control system with user friendly interface • Built-in memory of the PLC saves parameter sets required to produce different bottle sizes. • Pyrometric temperature measurement – Power Wizard KEY BENEFITS • Proven system working in hard environmental conditions • Powerful heading unit with precise controller and convenient adjusting mechanism • Minimum transfer space for the air distribution system • Simple, robust and durable operation MAIN PARAMETERS Blowing air quantity (25 BAR): 3.46 m3/h Mold material: FORTAL

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE Prodpswcggvjfx Adyjc

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine - ZENTRONIK ZR-7 1. Heating oven for heating PET preforms Podpfx Aownzdaedyerc 2. Semi-automatic machine for the production of PET bottles Mould: two-cavity for 5.0 liter bottles Efficiency: approx. 800 bph Technical condition: used, functional

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Prsdsvddkvspfx Adysc Very good condition

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. Prodpfoutni Rox Adyec The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: ready for operation (used), COMPLETE PET BOTTLES ASEPTIC STILL/GAS FILLING LINE, YOM 2002-2007 Pedexm Rwqspfx Adysrc CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH THE LINE INCLUDES: PREFORM DEPALETIZATOR BLOWING MACHINE KRONES CONTIFORM S16 BOTTLE AIR CONVEYOR BOTTLE RINSE, STERILIZATION, FILLING UNIT, KRONES CAF VODM 100, 60 RINSER, 80 FILLERS 28mm CAP STERILIZATION UNIT KRONES LABELING MACHINE CAPACITY 35.600 BPH LASERCODER BOTTLE CONTROLLER CONVEYORS SYSTEM FOIL SHRINK MULTIPACK, KRONES TWINPACK APPLICATOR PALLETIZER KRONES ROBOT 3A BELADER WITH PALETT MAGAZINE PALLET BINDER UNIT HB PALLET CODER UNIT EAN 128 RULAND TUBULAR STERILIZATOR WITH CIP UNIT STERITANK ROTH, CAPACITY 11 TONS CARBONISATION UNIT RULAND ECOLAB HYGIENE CENTRE RULAND STERILE WATER PLANT THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION.