Used Press Dryer for sale (13,311)

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm Dodpozrpuljfx Ai Eewd capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Item description: Clean hard floors comfortably, efficiently, and economically: with the battery-powered Tennant ride-on scrubber dryer T7+. Thanks to its compact design, the ride-on machine is suitable for narrow spaces and tight aisles. The optional ec-H2O-NanoClean technology ensures reduced water and cleaning agent consumption. Compact design – ideal for aisles and elevators. Clear sightlines and easy-to-use controls. Optimal water pickup – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available with various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoor Operation: Battery Voltage: 24 V Battery type: Gel battery Battery capacity: 240 Ah/per unit Frequency: 50 - 60 Hz Travel speed: 6.4 km/h Direction of travel: Forward, reverse Noise level in dB(A): 67 dB(A) Fresh/dirty water tank removable: No Tank volume, fresh water: 110 l Tank volume, dirty water: 110 l Theoretical area performance: 5120 m²/h Practical area performance: 5120 m²/h Working width: 800 mm Brush diameter: 400 mm Brush speed: 260 rpm Brush pressure: 36 - 73 kg Brush motor power: 450 W Brush-assisted drive: No Brush shut-off: Automatic, yes Tire material: Rubber Number of wheels: 3 Wheels leave no marks: Yes Wheel width: 80 mm Wheel diameter: 250 mm Turning radius: 1840 mm Operator cockpit: Yes Squeegee material: Linatex Squeegee width: 1000 mm Vacuum motor power: 450 W Body color: Teal Frame color: Teal Height: 1270 mm Width: 740 mm Depth: 1270 mm Weight: 443 kg Version with ec-H2O™ Rim material: Polyamide Dwedjziiu Hspfx Ai Ejd Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the universal solution for every application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Dsdpoziivqsfx Ai Ejwd Robust and durable: The machine is designed for intensive use and is popular in both the textile industry and other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer of 1 to 240 seconds provide flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of supply: (See picture) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 Dwodpfozryyrex Ai Esd - Pressing capacity: up to approx. 3–5 t/h

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Dwodpfx Aezryy Sji Esd Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: good (used), Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions for transport mm 3870 x 1040 x 2690 h Dede Agf Dtopfx Ai Eewd Weight kg 1800

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Dwedpfx Aievfy Sxe Esd Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, type of input current: three-phase, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Dwedpjy E Rr Ijfx Ai Eod Tank capacity: 50 L Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg

Condition: used, Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Dwedj Agp E Depfx Ai Eed Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Dwsdpfx Ae Agp A Esi Eed 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Serial-No. HR-6462 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately - Dsdoy Egz Sspfx Ai Eswd

Year of construction: 2023, condition: used, Hydraulic Press Manufacturer: PROZAP Type: EK0 Bushing Assembly Year of manufacture: 2023 Control system: Siemens Technical data: - Pressing force: 53 t Dedpszbvm Ijfx Ai Eswd - Stroke: 300 mm - Pneumatic system pressure: 6 bar - Maximum pneumatic supply pressure: 10 bar - Hydraulic system pressure: 255 bar - Dimensions (HxWxD): 3,200 x 2,500 x 2,350 mm - Weight: 8,000 kg In our assessment, the bushing press is in mint condition. Technical features: - Press-fitting of bushings, including plastic deformation - TOX pneumatic-hydraulic actuator with 53 t pressing force at 6 bar - 300 mm stroke Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm Dedpfjzakf Nex Ai Eswd -Weight: 5060 kg

Condition: good (used), Hand-operated spindle press, homemade, from a training center Dsdpozcqmlsfx Ai Eswd Pressing force: approx. 5-10 tons Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2020, Like-new press brake from Ermak / Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Dedozunlhjpfx Ai Ejwd Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Year of construction: 2011, condition: excellent (used), Sheer reed dryer Year 2011 Dwodpeigvtusfx Ai Esd In very good condition.

Condition: reconditioned (used), Overhauled and newly painted. The images are example photos of similar machines and are intended to show the design and quality of the overhaul. All wear parts are replaced. Filter cloths are new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Volume: 312 liters Operating pressure: 12 / 15 bar Feed inlet: flange 2”, center Number of plates: 40 plates Plate material: polypropylene Dwodpfxonh Nr Ij Ai Esd Cloth material: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip tray in plastic Motor hydraulics with single-acting cylinder. Optional: double-acting cylinder, which retracts the heavy pressure plates. With the single-acting cylinder, the operator must push the pressure plates back manually. Optional: filling pump as a piston diaphragm pump or compressed air diaphragm pump. If the plate size, number of plates, or other features do not meet your requirements, we can offer corresponding modifications!

Condition: new, Press force: 300 t Bending length: 4000 mm Distance between uprights: 3250 mm Overhang: 400 mm Installation height: 590 mm Stroke: 220 mm Return stroke speed: 80 mm/s Working speed: 8 mm/s Retraction speed: 80 mm/s Drive power: 22 kW Dimensions L x W x H: approx. 4150 x 1850 x 3100 mm Weight: approx. 20,000 kg Accessories / Special features: • CNC control Cybelec Cybtouch 12 P for Y1, Y2, X + automatic crowning o Simple operation, more efficient bending, and powerful functions o Touchscreen with bright colors • 5 x 800 mm upper tool PM 1, slightly bent, R=0.8 mm, pressure load 100 t/m, tip 88° • Universal die 95 x 95 mm with multiple V-openings Dwodpfx Asgiudxoi Eod • Laser safety curtain FISSLER on the right and left on the front side panels • Automatic hydraulic crowning device in the lower beam • Back gauge with linear guides • 3 front support arms • Foot pedal • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after receipt of order plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Pressing force: 40 t Bending length: 1270 mm Distance between uprights: 980 mm Overhang: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions L x W x H: approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special features: • Manual control for the motorized ram depth and backstop o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly curved, R = 0.8 mm, pressure load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backstop with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light barrier is required! • Front support arms • Control pendant Dwedpfxjgiud Hs Ai Esd • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after order receipt plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Sheet metal cutting dies Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Construction & building Product Info: No pit required Steel construction body T-Channel home plate & ram Dwsdpsfuam Rsfx Ai Esd 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Sheet metal forms Sheet metal forms Deep drawing moulds Hot aluminium & steel forging Automotive and spare parts Food packaging industry Electrical panels Industrial cooling white goods Construction & building Hair metal cutting dies Product Info: No pit required Steel construction body C-Channel home plate & ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate Dwodjfuam Uepfx Ai Ejd

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. Dwsdpfxsu Nfi Ue Ai Eod *

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional * Dsdpfeu Nfm Tjx Ai Ejwd

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm Dsdpfx Aju Nfnwei Eswd ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable Dsdpfx Aieu Nfn Re Ejwd passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *