Used Pressure Gauge for sale (16,487)

Condition: new, Digital pressure transmitter (sensor) for precise measurement of absolute or gauge pressure, level and flow in liquids and gases. Dedpj Afd D Sofx Aarewd

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: Dwedpfx Aoxv Dv Eearod - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: used, Year of construction: 1990, operating hours: 9,500 h, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 2,000 l, fuel tank capacity: 600 l, water pressure: 1,000 bar, pump capacity: 130 l/min, We offer this used Woma 325ZP30 high-pressure water jet in isotermic container, year of construction 1990. It could be sell separetaly without container. Dwsdpfx Aajyu Imtored If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted Dwjdpfx Aajwc Rk Ejrjd SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Djdpfx Aswc Afhsarswd Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Year of construction: 2002, operating hours: 46,928 h, functionality: fully functional, total width: 1,400 mm, total length: 1,500 mm, total height: 1,400 mm, type of input current: AC, overall weight: 1,800 kg, input voltage: 400 V, Technical specifications of the JCP 45 in detail Parameter Specification / Value Rated power 45 kW Maximum pressure 4,000 bar (constant working pressure) Flow rate 4.7 l/min (up to 5 l/min at reduced pressure) Djdpo Agvb Uofx Aarjwd Pressure ratio 1:13 to 1:16 (oil to water pressure) Maximum oil pressure 300 bar Pressure stages 2 pressure stages / continuously adjustable Electrical connection 3x 400V / 230V, 50Hz Required air pressure min. 6 bar (maximum 7 bar for control) Cooling system Oil-water cooling or alternatively oil-air cooling Noise level approx. 78 dB Dimensions (W x H x D) 1,500 x 1,400 x 1,400 mm Weight 1,800 kg

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Dedpfx Asz Egw Uoarjwd Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. Dedpfx Aaoz Dhrqsrswd TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Recently serviced Imported to Sweden in 2026 Djdpfx Ajz Eg Dhoarswd WITH HOT WATER UP TO 150°C!!!

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min Dwjdpfxoz Egmcj Aarsd 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 14,726 h, functionality: fully functional, total width: 1,270 mm, total length: 1,450 mm, total height: 1,420 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, type of input current: three-phase, overall weight: 635 kg, noise level: 75 dB, input voltage: 400 V, year of last overhaul: 2026, Falch R10/800 - 1000 Bar, 13lpm 2013 model Owned since new - full service history Operating hours - 14726 Unit can be seen working - slight weep on pump head. producing 1000 bar Dwedpfx Aae Ah E Awjred Sold as seen Complete with used dump gun, lance and 20m rubber hose Rotary nozzle to be purchased additionally Ideal for formwork cleaning, concrete removal

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C Dwodpfxoz Nd Nds Aarsd * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Dodpfxe Agb Dze Aarjwd Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Dedpfx Aozz Achsarswd Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: reconditioned (used), functionality: fully functional, empty load weight: 168 kg, input voltage: 1,000 V, KARCHER HDS 10/20-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 10/20-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 500 - 1000 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle Dwjdpjzvfl Ujfx Aared WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, temperature: 80 °C, power: 22 kW (29.91 HP), rotational speed (min.): 4,500 rpm, empty load weight: 2,500 kg, screw diameter: 305 mm, year of last overhaul: 2026, Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Dwodpfxjzgq Szs Aarjd Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: excellent (used), functionality: fully functional, mileage: 131,500 km, first registration: 01/2012, overall weight: 11,990 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, empty load weight: 7,445 kg, tire size: 285/70R19.5, fuel: diesel, wheelbase: 3,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2012, operating hours: 6,500 h, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, soot filter, In addition, we offer insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Weights and dimensions: GVW: 11990kg Unladen weight: 7445kg Payload: 4545kg GVW TRAIN: 26990kg On drawbar coupling no. 1: 15000kg Wheelbase: 3800mm External dimensions: Length: 770cm Width: 240cm Height: 310cm Emission standard: EURO 5 Volvo equipment: Cruise control On-board computer Automatic transmission (Allison) Factory VOLVO radio Rear axle lock Engine brake Electric windows Electrically adjustable mirrors Heated side mirrors Heated driver and passenger seats Manual air conditioning Breathalyzer Tachograph Electric sunroof Fabric upholstery Two seats Large cab with the possibility of installing a bunk Engine speed regulator Reversing camera ABS Immobilizer Air suspension REAR Inspection report: The Volvo has been inspected technically and mechanically; the vehicle arrived from Sweden on its wheels without any problems. The truck was purchased from a municipal company that used the vehicle and serviced it internally. The mileage has been verified in the documentation and invoices that are in the vehicle, and additionally verified with the Swedish vehicle registration authority. The entire vehicle is accident-free. It is currently fitted with winter tires of size: 285/70R19.5, with approximately 70% tread remaining. Type of body: WUKO / mobile container washer Washing system: high-pressure Type of vehicle: specialized truck PROFESSIONAL WUKO ELEIKO SYSTEM The vehicle is equipped with an extensive WUKO high-pressure system, integrated with a specialized body for cleaning waste containers. Equipment of the system: High-pressure pump. Water system with a filtration system. System of high-pressure pipes and connections. Hand-held high-pressure washing gun. Extended control panel. Electrical and pneumatic control system. Hydraulic system with distributors. Rear working chamber for container handling. Container lifting mechanism. Built-in technical space with service access. APPLICATION - WUKO / CONTAINER WASHING The vehicle is primarily intended for: Dwsdpfx Aas Abvb Iored Professional washing of bins and waste containers. Cleaning containers in residential buildings. Service for housing cooperatives and associations. Washing containers used by municipal companies. Cleaning containers in industrial plants. Performing mobile high-pressure services within the capabilities of the installed system. KEY ADVANTAGES SWEDISH ELEIKO BODY - a specialized installation designed for municipal applications. WUKO SYSTEM - an extensive high-pressure system with a pump, pipes, and a hand-held washing gun. MOBILE CONTAINER WASHER - the ability to perform services directly at the location of the containers. WIDE MUNICIPAL APPLICATION - a solution for companies involved in waste management and cleanliness maintenance. The stated price is net and applies to exports and businesses. A significant discount is available for individual customers. Please contact us directly by phone to get your best price!

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. Dwjdpfj Ah Siqjx Aarjd When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Djdey Sazfspfx Aarowd Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,100 mm, total height: 1,805 mm, total width: 650 mm, pressure: 60 bar, type of input current: three-phase, empty load weight: 140 kg, input voltage: 400 V, fuel: electricity, heating capacity: 3 kW (4.08 HP), overall weight: 240 kg, water tank capacity: 100 l, temperature: 45 °C, input current: 16 A, The enclosed cabinet, made of stainless steel, delivers a high-pressure solution (up to 60 bars) for precise and optimal cleaning or degreasing of mechanical parts. This compact washing station operates in a closed-loop system, making it highly economical in terms of product usage and suitable for any maintenance workshop. STANDARD FEATURES: • Adjustable high-pressure washing pump, up to 60 bars • Foot pedal control Dwsdpfxez Tfbce Aared • 60-micron filter • High-pressure spray gun • Compressed air blower inside the cabinet • Air blower for cleaning the window • LED lighting • Heating element controlled by an adjustable thermostat • Low-level control and safety cut-off • New gloves • Year: 2020 • Weight (kg): 140 • Dimensions (L x W x H mm): 1100 x 650 x 1805 • Work surface (mm): 850 x 650 • Payload (kg): 50 • Usable washing height (mm): 600 • Tank volume (L): 100 • Operating pressure (bar): 30 to 60 • Pump flow rate (l/min): 14 • Heating power (kW): 3 • Electrical supply: 400V Three-phase – 16A • Pneumatic supply: 6 - 7 bars

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 Dedpfx Aasz E N Ensrswd EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow cleaning fluid to be dispensed directly through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 133 kg, input voltage: 400 V, temperature: 155 °C, KÄRCHER HDS 895 HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE Djdpfxo Ahq E Ss Aarjwd KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Dwedpfxjz Ega No Aarsd Owned by the same operator since new For cold water only; heating element has been removed.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Dsdpfx Aaszh D N Norewd KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, temperature: 155 °C, KARCHER HDS 12/18-4SX HOT WATER WASHER BUILT-IN HOSE REEL The device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4SX Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 600 - 1200 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 20 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: Dwodpfx Aszrw A Doarod BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - unlimited time Operation: Two built-in chemical tanks allow for dispensing cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.