Used Punching Shear for sale (2,979)

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Cedpfx Aaogp T Eusqshd Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Codpfoixz D Uox Aaqshd Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: used, functionality: fully functional, Year of construction: 1981, machine/vehicle number: 10137, control type: manual, degree of automation: manual, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 13 mm, sheet thickness aluminum (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, Equipment: finger protection, foot remote control, LVD guillotine shear capacity 3100 mm x 13 mm Codpfx Aaexryiajqehd

Condition: good (used), Year of construction: 1997, KERMA die-cutter Max. size: 1220x820 mm Safety fence Chsdpfx Aaoxni Epsqsd 2 safety step mats

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm Codpfoxawbiex Aaqehd *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: ready for operation (used), Mechanical press/eccentric press by Stankoimport, model: 2225 (СТАНКОИМПОРТ Модель 2225). Material capacity: sheet thickness/width 18/190mm, max. tensile strength 500MPa. An inspection can be arranged by appointment. Cedpfxjxtpryj Aaqehd

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. Chjdpfx Aaoxmakgoqjd range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Chsdpettv Ecsfx Aaqed Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them.

Condition: new, The KMT B 1304 NC is a state-of-the-art motorized guillotine shear designed for exceptional cutting performance in the category of Guillotine Shears. This robust machine features a powerful motorized drive that allows for high cutting capabilities across multiple sheet thicknesses, from 0.8 mm to 4 mm. It incorporates advanced features such as an NC control for precision cutting length positioning and a reliable plate holding device to ensure stable support. The solid steel weldment construction, combined with guided cutting blades and a servo-driven back gauge, guarantees high accuracy and repeatability. Operators will appreciate the user-friendly PLC back-gauge control with a 4.3" touchscreen, optimizing the cutting process while keeping both hands free with the mobile foot switch. Standard equipment also includes safety guards and a hold-down fixture for quality assurance on every cut. Ideal for single and small series production, the KMT B 1304 NC embodies the quality and reliability synonymous with the KNUTH brand. You can order online this premium Motorized Guillotine Shear and elevate your sheet metal processing capabilities today. Chjdjwub Dmjpfx Aaqsd

Condition: used, sheet width - max. 300 mm plate thickness 8 mm flat steel 80 x 10 mm blade length 300 mm machine length 860 mm machine height 565 mm Chjdpjuvd A Ejfx Aaqed weight of the machine ca. 172 kg Long measuring shear Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1964, working width: 3,050 mm, sheet thickness (max.): 10 mm, total length: 4,250 mm, total width: 2,800 mm, total height: 1,800 mm, Working width: 3050 mm Sheet thickness: 10 mm Chjdpfx Aexrculeaqod Equipped with infeed table 2500x2000 mm

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, Manufacturer: Otto Kaiser Codpexr Tvtofx Aaqohd Model: PV 40 F Precision Punching Press Year of manufacture: 1969 (electrical/mechanical overhaul 1989) Machine table: 430 mm x 490 mm Cut-out: 180 mm x 150 mm Ram: 375 mm x 300 mm Clamping shank: according to DIN Ø40 mm Stroke adjustment: 8 mm–60 mm Ram adjustment: 60 mm Strokes: 80–400 strokes/min Feed: mechanical feed controlled via shaft Current press inspection certificate available.

Year of construction: 2010, condition: excellent (used), Kugler-Wamako ProPunch50-150, age 2010 Equipped with: Codsxt Edxepfx Aaqohd • Size min. 120 x 105mm • Size max. 500 x 500mm • Punching thickness max. 3mm • Capacity max 110 C/min • Automatic feeding • Jogger on delivery • 3 tools included • In production • Available immediately

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Csdpfx Aom Ncayeaqehd Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Chsdpfxjwzyg Hj Aaqod

Condition: good (used), Year of construction: 1975, Used plate shears from Safan Codpfx Aasxlgmrjqjhd Capacity 3100 x 13 mm Electric back gauge Adjustable cutting angle Machine comes as from work, fixed price based on so along

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Guillotine Shear Make: GEKA Type: ETS 3000x1.5 mm Year: 2011 Technical Data Manufacturer: GEKA Model: 3000 x 1.5 Year of manufacture: 2011 Working length: 3,030 mm Sheet thickness: 1.5 mm (St37) Motor power: 3 kW Weight: approx. 4 t Dimensions (L x W x H): 3.90 x 2.50 x 1.70 m Equipment • Angle stop • Motorized backgauge • Elgo P40 control • Electric sheet support device Cedjxl Twdspfx Aaqohd • Extendable table extension • Continuous hold-down bar • Cutting area illumination • Rear safety cage • Front drop sheet chute • Foot switch • Documentation All information subject to change and without guarantee. A demonstration in our showroom is possible at any time.

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Csdpfexl Du Tsx Aaqohd

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm Chjdpsxabi Rsfx Aaqjd - Safety devices - Operating instructions in German

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Chjdpfx Aaewd Ebzjqsd Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: excellent (used), Year of construction: 2015, HEIDELBERG Nela plate punch suitable for HD SM 52 / 74 / 102 and XL machines. Hole spacing: 425 mm and 780 mm. Year of manufacture: 2015. Chjdpfx Ajxq Txloaqod

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Type: HT 310x4 Codsxlf Inopfx Aaqehd Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Chjdow E Emaopfx Aaqjd Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Csdpfx Ajxld R Ijaqehd Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Year of construction: 2011, operating hours: 14,272 h, condition: excellent (used), Punching machine AMADA EM2510NT was manufactured in 2011 in France in the factory AMADA. In 2012 started used in Spain. In 2020 started used in Lithuania. And for now is for sale with 14 272 operating hours. This machine can be operate with a punching force of 200 kN. The Punching machine still is in good condition and serviced on time by Amada support company. Included full documentation of inspections. The turret punch is in exelent condition. The machine comes with the software. The Punching machine is still connected and it is possible to test anytime in Vilnius, Lithuania. Please see all photos and video. Specification: Year: 2011 Chodpelxy Efofx Aaqjd Made in: France Operating time in hours: 14 272 Power on hours: 29 580 Software: icluded Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: No tools Metal length: 2 500 mm. Metal width: 1270 mm. Sheet thickness: 3.2 mm. Metal width repositioning: 5 000 mm. Weight of the workpiece: 150 kg. Dimmensions: L 6080 x W 5120 x H2318 mm Weight: 16 500 kg Location: Vilnius, Lithuania Possible to test: Yes Any questions welcome.