Used Racks For Metal Sheets for sale (42,002)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, total length: 1,100 mm, total width: 1,320 mm, total height: 1,050 mm, input frequency: 50 Hz, Sheet metal cleaning machine KD-Putz Tubur Premium Sheet metal cleaning machine for baking trays / perforated sheets short side raised stainless steel version Isdpfx Apsyv U Nfj Dsih with oiling system & sheet metal trolley connection 400V, 16A CEE plug dimensions: 1320 x 1100 x 1050 mm, WxDxH used machine, available from a bakery.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) Iodpfx Apjzrr Nfj Deih - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Iisdpfx Apjzv Rc Sj Doh Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: new, Year of construction: 2026, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Iisdpfx Apozuvayo Doh Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Station type: Belt grinding Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Ijdpfx Apszrmqqs Doih Shipping packages: 2 EQUIPMENT CE marking

Condition: excellent (used), Product information: "POLY-PTX 800 Satin Finishing Machine" From the inventor of the belt grinder. Our multifunctional belt grinder with 1750 W power, speed control, ergonomic design, and versatility – also for a working width of up to 150 mm. High torque and power reserves guarantee professional, continuous operation and increased cost-effectiveness. Iiodpfxoz Sca Ue Ap Djh Features: Stepless speed control from 1000 to 3800 rpm with a tachogenerator, ensuring constant speed even under load. Grinds from coarse to finest. Balanced, straightforward manual operation without support rollers. This enables free movement (oscillation effect). It guarantees shadow-free, seamless, highly decorative surfaces in satin, matte, and industrial finishes. Satinizes, polishes to a mirror finish, and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, and aluminum, as well as wood. Finest grinding on large surfaces, without shadows and edges. Removes welds, deep scratches, rust, dirt, paint layers, and oxides. From rough grinding to a mirror finish of stainless steel and non-ferrous metals in just three steps. Also ideal as a tube grinder using a grinding belt roller. Grinds and polishes open and closed tubular structures. For processing tubes, the "dot system" allows for safe and quick connection of non-woven and felt belts to closed tubular structures. It does not require complicated gluing of the belts. A vast selection of grinding tools that offers a solution for every task. With a rubberized grip for optimal handling! Set contents: 1 POLY-PTX® 800 base unit 1 sturdy, impact-resistant plastic case 1 QUICK-LOCK cable, 4 m 1 POLY-PTX® mounting screw 1 non-woven disc, 100 mm wide Device type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, sleeves, polishing rings, wheels Plug type/power connection: EU (C+F) 220–240 V ~ 50–60 Hz Power consumption: 1750 watts Max. tool dimension: Diameter 115 x width 100 mm Tool holder: Multi-spline shank 19 mm WEEE registration number: DE 51395731 Speed in rpm: 1000 - 3800

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Sheet metal cleaning machine Jeros 5015/828 for 2-edge sheet metal short side raised stainless steel design with oiling function DGUV V3 certified – available only from us Iiodpfxoyaklcs Ap Dsh Connection: 400V, 16A-CEE plug Used machine Come and visit us!

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Iiodpfx Apenvdtco Djh Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Application Types Iiedpex E Ef Nofx Ap Deh Other Sheet Metal Machinery

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Iiodsulauvjpfx Ap Deh Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm Isdpezhm Nfjfx Ap Dsih • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Timesavers Series 12-600-WW Passage width 600mm Station 1: Grinding belt, pre-grinding, removes laser spatter and raised burrs. Iijdpjznltisfx Ap Doh Station 2: Grinding belt/scotch belt, final grinding, surface finishing. The Series 12-600-WW is ideally suited for deburring and finish grinding sheet metal up to 100mm thick. The two grinding belt stations provide a uniform, clean finish on the surface of your sheet metal.

Condition: new, Universal shear for cutting metal sheets. Includes base frame. Working length: 1000 mm Iijdpfx Apoga T Efo Djh Sheet thickness: 1.5 mm Weight: 70 kg

Condition: good (used), Number of guide rollers: 5 Sheet width: 430 mm Sheet thickness: 1 mm Top roller diameter: 2 top rollers - Ø 60 mm Bottom roller diameter: 3 bottom rollers - Ø 60 mm Iodpjgvl U Rsfx Ap Doih

Condition: new, Year of construction: 2026, Hydraulic bending machines HKS-CNC Profi are equipped with automatic scissors and a movable mass for moving sheet metal. CNC software enables the graphic design of profiles of various forms and sizes. A 21,5-inch industrial LCD touch-screen makes the programming even more manageable. Working length: 6.100 mm Machine length: 7.200 mm Sheet metal thickness: 1,5mm (Al), 1,25 mm (Steel) Stand number: 6 Machine weight: 3.600 kg Iiedpfxezu A N Us Ap Dsh Delivery time: 10 weeks after the order

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Rear table with spheres Iiodpfx Aewb Ar Sjp Dsh 155 additional tools to those present on the machine

Condition: excellent (used), Year of construction: 2019, Still in very good condition, this swiveling bending machine has a maximum working length of 4.15 m and features a CNC control system for 10 different steps. Iedpfxszvx Tlo Ap Dsih

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, load capacity: 800 kg, Vacuum lifter with battery operation for cordless operation. No cables that can be damaged or torn. Extremely long battery life until the next recharge. Very high maximum weight of the plates to be lifted, depending on the surface condition, up to 800 kilograms – if required, we can also offer lifters for higher loads. Plate size max. 4000x2000 mm and 3000x1500 mm. Plate lifters can also be individually slid off for removing parts. Suction cups can be individually moved on the crossbar. CE-compliant product. Iisdpfx Ash Hnk Hjp Deh

Condition: new, Year of construction: 2026, Free delivery up to 150 km. The ZGR3000/1.0mm press brake from Prod-Masz is available on-site for testing and immediate purchase. Iodozdcl Nspfx Ap Dsih You will receive on-site technical training. Technical data: -Working width 3140 mm -Sheet thickness up to 1 mm -30% higher sheet thickness for non-ferrous metals -Bending angle up to 145° -Bending flange: 20 mm -Throat: 80 mm -Gas springs -Degree scale -Stop for preset bending angles -Shelf for sheet metal -Weight approx. 550 kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request. Optional accessory: Roller shear (up to 0.8 mm) EUR 350 All prices are subject to an additional 19% VAT. CE certificate Warranty: 12 months Self-collection Shipping within Germany: EUR 360

Condition: used, Coil Sheet Metal Cutting Line – CARBONINI SLER 1500 RIG – Year 2009 Industrial CARBONINI coil processing and sheet metal cutting line, designed to perform coil unwinding, sheet metal straightening, notching and cutting operations. The line is capable of processing sheet metal with a maximum working width of 1,500 mm and a declared maximum thickness of 2 mm. The system consists of several processing units arranged in sequence for sheet metal preparation and cutting. Line Configuration 1. Coil Decoiler Unit designed to support and unwind sheet metal coils, feeding the material into the processing line. 2. Sheet Metal Straightener Straightening unit designed to correct deformations in the sheet metal as it is unwound from the coil, preparing it for subsequent processing operations. 3. Notching Unit Unit designed to perform notching operations on sheet metal according to specific production requirements. 4. Shearing Unit Cutting unit designed to cut sheet metal to the required dimensions. Iisdpfx Apez Nz S Ns Dsh Main Features Maximum working width: 1,500 mm Declared maximum sheet thickness: 2 mm Complete system comprising a coil decoiler, sheet metal straightener, notching unit and shearing unit. Heavy-duty industrial construction with protective guards around the operating units. Electrical control cabinet and operator control station visible in the photographic documentation. Machine Identification Details Manufacturer: CARBONINI Model: SLER 1500 RIG Year of manufacture: 2009 CE marking: Present on the manufacturer's identification plate Weight indicated on the identification plate: 6,200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment Iodjw T Sc Aepfx Ap Doih • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: used, functionality: fully functional, operating hours: 500 h, Thalmann TD 150 6.4M, manufactured in 2021. The machine is in excellent technical condition and is ready for a full inspection. Ijdpfxez D Umno Ap Doih

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square Isdpfx Ast Hmi Aep Deih -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Condition: used, functionality: fully functional, plate width: 1,250 mm, Punching force: 30 tons Iiodpozvxlzefx Ap Dsh Maximum sheet width: 1,250 mm Maximum sheet length: 2,000 mm Maximum steel thickness: 6 mm Operating speed: 480 strokes/min

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Ijdpfx Aetzkg Uop Doih Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100