Used Rodi 50 Sl for sale (87,836)

Condition: ready for operation (used), Franz Kessler DMR112.50.2.R0H Motor SN: 126577, used, slight signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gedpfxjugchme Aftsuk

Condition: new, diameter / mm Cutting (quantity) / weight / kg Spindle type: 180.6.C1/FS/19-1.1/15-1D/165/HSK-A63 Gusdpouddgrofx Aftek Ident No.: 180.6C1/x003618B2 Milling spindle for Starrag Heckert CWK 400D.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. Gjdpfxet Hwzpj Afteuk * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 Gedpowcg Erofx Aftsuk - Machine ON: 44.854 h - Heat unit

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Gedoqrr A Repfx Aftjuk

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material. Gusdpjurlakjfx Aftsk

Condition: ready for operation (used), Year of construction: 2015, Connected load: 160kVA, length: 8328mm, width: 2768mm, height: 3665mm, weight: 9.5t, with documentation. Gsdpslnmv Defx Aftsuk

Condition: used, Max. depth of cut Min depth of cut 75 Max. width of cut 700 Gjdoulp Hhjpfx Aftouk Max distance between saws 450 Min distance between saws 32

Year of construction: 1998, condition: good (used), Hello Dear Interested Parties We are offering a well used Rösler vibratory finishing machine. This Rösler continuous grinding machine has been used since 2015 for own use and we are the 2nd owner. It is sold because of a reconstruction of the production hall and other project purposes. Manufacturer: Rösler Throughfeed Line Type: R 650 / 4600 DA Machine No.: 19289/98-06 Year of construction: June 1998 Control: SPS control Plant & Accessories: Dosing equipment Vibrating feeder buffer R 20/6/1,5 SR-P To conveyor 1, R470/4000 FB/S to spraying system Spraying system R 12/6 SM-E-So To conveyor belt 2, R470/2500 FB/S to continuous plant To conveyor belt 3, R470/1500 FB/S to circular dryer Granulate rotary dryer RT 850EUR Sludge tanks Central control cabinet with PLC control S5-95 Remark: Plant fuses perfectly, inspection on site is possible by appointment, this plant is still under power and can be tested if necessary. since here is a used trades, no warranty or no guarantees for. Gsdpfxoihvr Ro Aftsuk MFG

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer Gusdpovppw Sjfx Aftok -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: ready for operation (used), Rösler R420 Rotary Vibrator Mass Finishing Machine Lining approximately 15mm thick Capacity: 420 liters Outer diameter: approx. 1520mm Process channel width: 360mm Top edge of container height: 1235mm Motor power: 7.5 kW Speed: 985 / 1480 rpm Total power consumption: 6.2 kW Dimensions: 1600mm x 1900mm x 1300mm (W x L x H) Gjdpfjwz Nlrsx Aftjuk Weight (empty): 1076 kg Water / air supply: Water Ø9x30mm, Air Ø6x32mm Rösler RT150 Rotary Dryer Dimensions: 1400mm x 1300mm x 1000mm (L x W x H) Weight: approx. 300 kg Motor power: 0.8 kW Infeed/outfeed height: approx. 860mm Max. workpiece size: up to approx. 80mm diagonal Voltage: 400V three-phase Rösler Separation Unit / Separator You are welcome to arrange a viewing appointment. We would be happy to organize cost-effective shipping for you. You will receive a proper invoice. For international customers, a net invoice can also be provided. A valid VAT ID number is required. Subject to prior sale. Visit our shop and view our other offers as well. Any company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviation from technical data and errors in item descriptions may occur and are subject to change.

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Gedev Rpn Tspfx Aftouk We cordially invite you to cooperate!

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Guedpfx Asnvfdbeftok

Condition: new, The new compressor from Hauslhof, in an extra strong, long-lasting design. - strong high-performance unit - cylinder and unit body made of machine cast iron - thick-walled air tank for a long service life - V-belt drive with extra large fan wheel - Condor pressure switch with pressure display - pressure reducer - high delivery capacity - after-cooling fins - start-up relief valve - 1/2" connection with shut-off valve - replaceable air filters - drainage valve - powder-coated - mobile Made in Europe, CE compliant Gujdpfx Asvrvzpjftok Technical data: Suction capacity 500 l Delivery capacity 350 l Tank 100 l max. pressure 9 bar Cylinder 2 Motor output 3 kW at 100% ED, 400 V Unit speed 1635 rpm Noise 79 dBA Weight 92 kg Dimensions L x W x H 1150 x 500 x 850 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, total width: 7,000 mm, total length: 10,000 mm, total height: 2,500 mm, input voltage: 380 V, compressed air connection: 1 bar, overall weight: 22,000 kg, Sloter with reception from stacker, maximum size in passage 3300x2500mm. The machine supports E,B,C,EB,BC waves. The machine is in very good condition, All settings are from the touch panel of the machine or it is possible to set manually. The maximum speed of the machine is 150 pieces per minute. The controls and inverter of the machine are Siemens. Guodpfxou Dhzco Aftek The reason for selling is to replace the machine with a larger model. Delivery at the expense of the buyer. I will answer all additional questions in a private message.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator Guodsvppxpjpfx Aftok -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Gusdenvfctepfx Aftsk

Condition: new, The industrial compressor from Hauslhof with 15 bar, in an extra strong, long-lasting design. - strong high-performance unit - cylinder and unit body made of machine cast iron - thick-walled air tank for a long service life - V-belt drive with extra large fan wheel - Condor pressure switch with pressure display - high delivery capacity - after-cooling fins - start-up relief valve - replaceable air filters - drainage valve - powder-coated - automatic star delta connection Technical data: Suction capacity 1,400 l/min Guedpevrvzcefx Aftok Delivery capacity approx. 1,100 l/min Tank capacity 500 l max. pressure 15 bar Cylinder 4 Compressor stages 2 Motor output 11 kW at 100% duty cycle, 400 V Noise 80 dBA Weight 380 kg Dimensions L x W x H 1980 x 610 x 1250 mm

Year of construction: 1995, condition: ready for operation (used), A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible. Guedpfxjw Exr Ns Aftok

Condition: new, The new log band saw from Hauslhof is suitable for a log diameter of up to 65 cm and has good cutting accuracy. Its ease of use makes it ideal for forest owners who want to start cutting their own wood, regardless of the type of wood. It can be extended indefinitely with extension sections and can be easily assembled and dismantled. Manual feed and cutting height adjustment mean low maintenance. CE tested. Technical data: max. log diameter: 650 mm max. board width: 475 mm motor output power S6: 6.5 kW (5.5 kW S1) 400 V cutting length basic version: 2950 mm saw band length: 3658 mm saw band width: up to 35 mm Gusdpevru Ubofx Aftjk band speed: 20 m/sec cutting length extension section optional: 1.95 m weight: 335 kg possible optional equipment - extension section extends the cutting length by 1.95 m each

Condition: new, The new industrial compressor from Hauslhof, in an extra strong, long-lasting design. - strong high-performance unit - cylinder and unit body made of machine cast iron - thick-walled air tank for a long service life - V-belt drive with extra large fan wheel - Condor pressure switch with pressure display - high delivery performance - after-cooling fins - start-up relief valve - replaceable air filters - drainage valve - powder-coated - automatic star delta connection Technical data: Suction capacity 1,400 l Tank 500 l max. pressure 10 bar (15 bar) Cylinder 4 Compressor stages 2 Motor output 7.5 kW at 100% duty cycle, 400 V Unit speed 770 rpm Noise 80 dBA Weight 350 kg Dimensions L x W x H 1980 x 610 x 1250 mm Also available in 15 bar version on request Gedpfsvrvziox Aftouk

Condition: good (used), turning diameter over cross slide: 510 mm, turning length: 500 mm, turning diameter: 320 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-200/500 CNC Lathe Year: around 1999 Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki SMC-500 Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Gujdpfjx Hpx Nex Aftok Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 51 mm Spindle Speed: up to 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 10 Stations Tool Size: 25 mm Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: good (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR span range max.: 400 mm span range min.: 50mm Gujdpfx Aox Hhhcjftok steady rest width: 170 mm steady rest height: 730 mm

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module SN T-H56148980 A5E03721153 FS: B, used, in good condition, 100% functional, delivery as per photos. Gujdpox Euzmefx Aftjk

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module SN T-EN6081032 A5E03721153 FS: B, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gsdpfxjx Euzgs Afteuk