Used Rolling Press for sale (31,202)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,663 h, controller model: MMC PLC, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 265 mm, throat depth: 400 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Travel X-axis: 600 mm Travel R-axis: 250 mm Travel Z-axis: 2,900 mm Stroke: 265 mm Hfjdpex I Hzwefx Ahysb Throat depth: 400 mm Distance between uprights: 3,750 mm Installation height: 550 mm Table width: 60 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2 Control system: MMC PLC Oil capacity: 600 l Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,300 x 4,020 mm Weight: 29,000 kg Operating hours: 42,663 h EQUIPMENT Hydraulic crowning Side safety fences Rear safety guard FIESSLER light barrier Note: The machine is sold without tooling.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 9,874 h, bending force (max.): 173 t, working width: 4,250 mm, stroke length: 600 mm, throat depth: 420 mm, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm Hodpfx Ajx R S S Hehyefb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: ready for operation (used), functionality: fully functional, bending force (max.): 125 t, stroke length: 120 mm, throat depth: 320 mm, distance between stands: 4,950 mm, travel distance X-axis: 800 mm, TECHNICAL DETAILS Hfodpex Uptcefx Ahyjb Bending capacity: 1,250 kN Rated forming force: 125 t Distance between uprights: 4,950 mm Throat depth: 320 mm Maximum height between table and ram: 380 mm Table length: 6,000 mm Table height above floor: 860 mm X-axis travel: 800 mm X-axis repeatability: ±0.01 mm Y-axis stroke: 120 mm Speed: max. 300 mm/s Ram rapid traverse: 120 mm/s Working speed: 5–15 mm/s Fast return: 80 mm/s MACHINE DETAILS CNC control: 2+1 axes Y + X + manual axes R + Z Dimensions and Weight Machine dimensions: 6,250 × 1,750 × 2,350 mm Machine weight: 13,550 kg Hydraulics Gear pump type: PGP3-40 Rated flow: 40 ml/rev Rated pressure: 21.5 MPa Oil tank volume: 250 l Drive Motor type: Y160L-4P Supply: 400 V / 50 Hz Power: max. 11 kW Motor speed: 1,450 rpm

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Hedpsx A Hfvefx Ahyofb

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Hfedpfx Ajfnk Ehohyjb Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Charging Box Area: Dimensions: 72" Long x 30" Wide x 19" Deep Bale Size: Maximum: 12" x 6" x 15" Minimum: 12" x 6" x 4" Average: 12" x 6" x 6" Bale Weight: Aluminum: 20-60 lbs. Stainless Steel: 20-50 lbs. Copper: 60-120 lbs. Brass: 50-100 lbs. Total Average: 50 lbs. Machine Cycle Time (Exclusive of Loading Hopper): Cycle Time: 25 seconds Approximate Production Capacity (With Average Bale Weight 50 lbs): Capacity: Up to 1,152 bales (57,600 lbs or 28.8 tons) Based on an 8-hour shift and depending on loading conditions and operator. Compression Door: Total Force: 15.7 tons 1st Squeeze (Main Ram): Total Force: 48.1 tons Side Squeeze (Final Compression): Total Force: 79.5 tons Vickers Power Unit: Oil Reservoir Capacity: 275 gallons Motor: 1-30 HP 3/60/220/440 Equipped With: Skip pan and bale ejector Hfedpfex Np Uvsx Ahyjb Dimensions: Overall Dimensions: 8'9" wide plus skip pan x 15'6" long x 5' high Approximate Weight: 18,000 lbs

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hedpfx Ajx I Ebiehyofb Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: used, Year of construction: 2006, color channels: 4, paper width (min.): 520 mm, paper width (max.): 520 mm, Heidelberg PM 52-4P Offset Printing Press PRICE: $39,000 USD Buyer is responsible for all rigging and dismantling within our facility. Buyer to arrange transportation after removal. Offered for sale is a well-maintained Heidelberg PM 52-4P, ideal for short to medium run commercial printing with fast makeready and excellent color consistency. - 79 million impressions - One owner since new - Complete maintenance history, fully documented and serviced exclusively by Heidelberg technicians - Regular preventive maintenance performed to manufacturer standards - Classic Console, Easy Plate, Auto Roller Washers, Auto Blanket Washer Hsdpfxjx Tcx Nj Ahyefb The press has been serviced by Heidelberg its entire life. We have the full service history on the machine.

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Table Size: 71" lr x 98" fb Hodpfxjl Ayc To Ahyofb Swivel Platen Size: 71’ lr x 98” fb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Max length workable: 2600 mm Hedpox A Hfpjfx Ahyjfb Max height workable: 1300 mm

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm Hfedpfjwz Rv Esx Ahyob weight of the machine ca. 14 t

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Hfedpfx Ahew Nbh Hsysb Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hfsdpfx Aox I D T Rshysb Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Hfodpsxnikljfx Ahyob

Condition: used, total length: 6,500 mm, total width: 2,400 mm, total height: 2,000 mm, Empty weight: 23.000 kg Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. Hfodpsx U Dmwjfx Ahyob - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 250 - Options: Plate support, Cone rolling - Transport dimensions: 6500mm x 2400mm x 2000mm (l x w x h) - Transport weight [kg]: 23000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Press Brake Brand: LVD Hfodpfox Tqt Uox Ahyeb Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: used, Year of construction: 1999, hydraulic ja Hjdpfx Ajx U A Tvshyefb 100 t weight of the machine ca. 2,9 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Control: CYBELEC DNC 880S Dimensions & weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg Hfsdpfxsx I D Saj Ahysb EQUIPMENT Hydraulic Wila upper clamping Motorized crowning

Condition: used, Year of construction: 1992, total length: 3,920 mm, total width: 2,180 mm, total height: 2,290 mm, Weight: 6.000 kg - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 57090 - Drive system: Teach-in - Control system brand: HACO - Control system type: ATL 550 - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 135 - Max. working width [mm]: 3600 - Column gap [mm]: 3050 - Backgauge depth [mm]: 1000 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3920mm x 2180mm x 2290mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information Hfjdpsx Up Rzefx Ahysb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Hfjdpjx U A H Nofx Ahyob +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm MACHINE DETAILS Hedpsx I D E Hefx Ahyefb Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Weight: 7,000 kg EQUIPMENT Foot pedal Hydraulic upper tool clamping 2 manually adjustable backgauge fingers Tooling

Condition: used, Year of construction: 1999, pressure 30 t plate thickness 800 mm keins Hodpsvanvzsfx Ahysfb weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1970, pressure 40 t Hjdpfxsvxltbe Ahysfb stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 Hfsdoq Awh Rspfx Ahyjb working length 2550 mm output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: used, Year of construction: 1994, Hans Schoen NH65 Hfedpfx Aevrk Epjhyeb pressure 65 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++