Used Rotary Feeder for sale (6,337)

Condition: new, table diameter 500 mm table load 300 horizontal kg Fedpfxexabl So Am Eopp table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. Fpedpfx Amsxabm Ns Eop - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, Vacuum pump, vane cell pump, rotary vane pump WERIE RIETSCHLE Model CLFTL 25 DV Device No.: 481579 Delivery rate: 25 m3/h Vacuum: -0.6 bar (test run: -0.66 bar) Vacuum level: 60% Motor speed: 1,400 rpm Fodsxciwnopfx Am Espp Motor power: 1.4 kW Power supply: 220 Volt, 50 Hz - Dry-running pump without oil lubrication - Threaded connection for suction and pressure line: 1/2" Dimensions (L x W x H): 600 x 360 x 270 mm Weight: 50 kg Good condition

Condition: like new (used), Feeder for four-sided planer VANHOLD, 0.55 kW Fodpfjyq Hxmex Am Eopp

Condition: used, Discharge height: 125 cm Overall height: 200 cm Overall length: 205 cm Width: 117 cm Feeding table size: 190 x 80 cm Dosing adjustment Year of manufacture: 2012 Machine ready for operation Fedpfx Asywdyvom Eepp Please check my other listings

Condition: used, Discharge height: 175 cm Feeding table size: 115 x 75 cm Total height: 252 cm Total length: 120 cm Total width: 110 cm Fsdeywdzajpfx Am Ejpp Please check my other listings as well.

Condition: excellent (used), Discharge height: 3100 mm Feed height: 1870 mm Belt width: 590 mm Cleat spacing: 250 mm Cleat height: 35 mm Total height: 3950 mm The machine is ready for operation Fodpfx Amoy D Dtcj Espp Please check my other listings.

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Length: 2750 mm Fpodszdrbxspfx Am Ejp Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HZQJ240620819, type of input current: three-phase, overall weight: 3,500 kg, input voltage: 380 V, table width: 2,000 mm, roll diameter: 470 mm, product width (max.): 1,800 mm, working width: 1,900 mm, Hongzhong Sublimation Calender (Rotary Heat Transfer Press) For sale: Professional dye-sublimation/rotary heat transfer machine by Hongzhong Machinery. Designed for heavy-duty industrial operation, offering high efficiency, reliability, and precision. Key Features & Advantages: Heating System: Thermal oil-heated drum system, ensuring uniform and stable temperature distribution across the entire cylinder surface. Control: Intelligent PLC touchscreen interface (WEINVIEW) with multilingual support and an over-temperature alarm. Functionality: Automatic felt/blanket tracking alignment and inverter-driven variable speed control. Safety: 4 emergency stop switches and an automatic cool-down function with auto shut-off once the temperature drops below 80°C. Applications: Ideal for the textile industry – supports both roll-to-roll continuous transfer and piece-by-piece (cut parts) production. Technical Specifications & Equipment: Power Supply: 3-phase (380V) Heating Time: Approx. 45 minutes Equipment: Heavy-duty work table, protective tissue/paper tensioning systems, and finished material take-up/rewind system. Fpodpfoz Szc Hjx Am Eop Easy to operate and maintain, engineered for long-term commercial use.

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) Fsdpfxsxaac Ae Am Eepp - 1 wired remote control

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0 - 90 Grad turning speeds 0,25 - 4,0 U/min 360 Nm welding current 500 Ampere total power requirement 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. Fedpjfv Axqefx Am Eepp • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 700 mm Fpjdpjfv Axuofx Am Esp table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min 900 Nm total power requirement 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1300 mm table load 3 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 6000 Nm 0 1,1 / 1,1 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. Fjdofv Ax Hepfx Am Eopp • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1000 - 1450 mm max. torque on the faceplate 2000 Nm engine output 0,75 / 0,55 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. Fjdpfsfv Ayrsx Am Ejpp The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. Fedpfx Amefv Ay De Espp The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 1200 mm table load 3 t swivelling range 0 - 135 Grad turning speeds 0,07- 0,7 U/min Fodpfofv Azaox Am Eepp table height adjustment von 980 bis 1750 mm max. torque on the faceplate 4500 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, table diameter 700 mm table load 0,5 t swivelling range 0 - 135 Grad turning speeds 0,2 - 3 U/min height adjustment 400 - 900 mm boring diameter 100 mm welding current max. 500 Ampere total power requirement 0,75 kW including remote control and welding current transmission. Fpedpfx Aefv Azlem Eop

Condition: new, table diameter 330 mm table load 220 Kg swivelling range 135 Grad Fsdpfeh D Svcox Am Ejpp tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 100 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 48 Kg dimensions of the machine ca. 640 x 440 x 630 m

Condition: new, table diameter 330 mm table load 350 Kg swivelling range 135 Grad Fpedpfxsh D Svge Am Eop tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 120 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 52 Kg dimensions of the machine ca. 640 x 490 x 630 m

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad Fpsdoh Evt Uopfx Am Eop table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: excellent (used), 547 USED Winkler Compact 1.8 rotary trolley oven. Oven for 60x80 or 58x78 baking trays. EQUIPMENT: - gas burner - 2 baking trolleys 58x78 Fsdpfx Asz Atyyem Espp The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Fodpfx Amezy Hw Ho Espp Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Year of construction: 2003, Planer Rollers no. 17 Diameter 42 Belt width 2,000 mm. Fedpfx Amszy Urlo Eopp Minimum thickness 0.5 mm. Maximum thickness 3 mm.

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm Fpodpfx Aez Nkf Esm Ejp -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: new, table diameter 690 mm table load 500 / 250 Kg turning speeds 0,5 - 3,2 U/min Torque Drehen 1200 Nm spindle bore 100 mm swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall maschinell Kippen 1500 Nm welding current 500 Ampere connected load frequency 230 Volt Fpodpfjl R Nnysx Am Esp Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal