Used Round Corner Cutter for sale (8,572)

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Kodpsi Dagksfx Anwenc Measuring height: 500 mm Total height: 1675 mm

Condition: excellent (used), Offer consisting of: Polar 92 N Pro HD, year of manufacture 2014, just under 600,000 cuts, with side Resopal air tables (750x750cm), including replacement blades Knjdpfevyavtsx Anwoc

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution Knjdpfsgvu Alox Anwec - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 821301-10002, Equipment / Additional information: Hardware • OptiPrint™ media cleaner • Powered roll feed system with media flanges • Powered roll up system with media flanges • Baskets • Rear and Front Media sensor • Hard-Disk (2 GB job storage space) Interface • 8-key control panel. • 4x20-character liquid crystal display. • English Display language. • Metric or English units. Functionality • 16 user configurations. Kodpfshu Sawex Anwenc • Auto Alignment system. • Up to eight colors/job • OptiTrac Ribbon save • Right side of band • OptiTrac colors : Mirror silver and Gold Cutting: • Concatenation and curve smoothing to obtain better cut quality. • OptiCut drag-movement optimization. • Overcut for easy weeding. • Multiple reprint feature (up to 999). • Flash Eproms With 5 cassettes and various color ribbons Operation manual

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving Knjdsft Ti Tjpfx Anwoc - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Stephan Cutter, Model 44 400 V Knjdjz D Dvxepfx Anwec

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Knedpfx Ansz Dw Emswoc Emergency stop safety cable Side cover Operating manual

Year of construction: 1995, condition: good (used), Max. roll diameter, unwinder: 700 mm (Shaft 76) Max. roll diameter, rewinder: 450 mm Max. web width: 330 mm Max. speed: 220 m/min Knodszn Azwopfx Anwjc Description: Unwinder, splicing table, web guiding system, cutting unit, rewinder, counters (labels or meters), missing label detection with visual inspection.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long Kodpfx Anezyuckjwenc The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cuts flush with straight and miter cuts (up to 45°) - For solid strips up to 30 mm - Bevel (0–20°) - Rounds veneer and plastic edges Knjdpfx Anozyy Aiswec - Workpiece thickness: 5–50 mm - Automatic workpiece clamping - Cutting operation triggered by foot switch - Saw blade diameter: 150 mm - Rounding cutter: 100, radius: 2–3 mm - Saw blade tilt: -20° (bevel) – 45° (miter) - Working height: 720 mm - Movable workpiece support: 820 mm - Motor power: 0.55 kW - Pneumatic connection: 5 bar

Condition: used, functionality: fully functional, Year of construction: 2022, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 320 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: centralized greasing system, cooling unit, We offer this used laser cutting machine with a rotary table, manufactured by Otinus, model VF1530-3000W, year of manufacture 2022. Machine name: Fiber laser cutting machine Model: VF1530-3000W Working area: 1500×3000 mm Kedpfx Anjzzx Ruswjnc Laser power: 3000 W Serial number: 2022011503J Date of manufacture: 2022,1 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 220 V, The JAC Eco+ 450 (also referenced as the ECH 450/99) is an automatic, mobile bread slicer manufactured by JAC Machines, featuring their patented Intelligent Slicing Control (ISC) system. This machine is suitable for slicing bread with a maximum dimension of 440 x 160 mm. Key Features Intelligent Slicing Control (ISC): An automatic pressure and slicing speed regulation system that adjusts cutting parameters based on bread consistency without requiring manual adjustments. Jacflaps: A specialized mechanism that holds the loaf together securely to make unloading seamless. Loaf Pusher Heights: configurable with Extra low (50mm), Low (80mm), or High (100mm) The slicing thickness is 14 mm. Amperage: 4 A Frequency: 50 Hz Power supply: 230V single phase Blade/Knife Count: 34 knives Working width: 450 mm Blade dimensions: 13 x 0.5 mm steel Max. Loaf dimension: 44 x 31 x 16 cm Motor power: 0.49 kW Noise level during operation: < 70 db Surround environment temperature: 5 to 40°C Surround relative humidity: 30%-95% With metal & plastic crumb tray: 18-liter capacity (accessible via front tilting door); Outside dimensions: length 600 mm x depth 750 mm x height 1300 mm Machine weight 180 kg This machine is in good condition Video: Price Euro 1.500 Euro + VAT, negotiable, FCA: Oradea/Romania Knjdpfx Ansz Evimewec Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Storage location number: 3134 Manufacturer: Kuhlmann (Hahn & Kolb) Type: Machine number: Grinding spindle speed: 2,750 rpm Max. collet diameter: 17.5 mm Max. radius to be ground: 10 mm Coarse adjustment of the workpiece carrier: mm Max. fine adjustment of the workpiece carrier: mm Power of the drive motor: 0.25 kW Knodpszy I D Iofx Anwsc Dimensions: 430 x 450 x 350 mm Weight: 32 kg

Condition: used, Year of construction: 2026, Base frame for Fortuna roll presses, mobile or stationary Knjdpfxoz A Snto Anwec Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic, size 3/4) With heavy-duty, low-profile rollers or, depending on requirements, designed for stationary use With threaded mounting holes Made of solid stainless steel plate

Condition: used, Year of construction: 2018, Dough dividing and forming machine Lippelt SVI-4DA Year of manufacture: 2018 Kodpoz A Srxsfx Anwonc Dough hopper with pre-portioner, approx. 130 kg dough capacity Head divider, 4-row Weighing piston for small and large weights Weight range, small: 50-80 g Weight range, large: 70-115 g Touchscreen control, Siemens PLC With program memory Spreading belts with adjustable spreading width Flour dusting for spreading belts With oiling system for rose buns

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Knodpfx Asz A Ufzsnwjc Transportation, installation and commissioning can be offered on request.

Condition: new, neu Kjdpfx Anewiq Scewonc ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. Knedpexugxtjfx Anwoc The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Condition: used, functionality: fully functional, SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - Maximum tenon size: 100 x 30 mm Kodsx Rdnajpfx Anwonc - Maximum table tilt: 20° - Workpiece support guide tilt: 45° - Hourly production: 600/700 tenons - Cutter rotation: 9,000 rpm - Cutter motor power: 4 hp

Condition: like new (used), functionality: fully functional, Knife shaft Z4, in like-new condition. Kjdpfx Anoyur N Eowenc Planer shaft Z4. 1 unit for the bottom. 1 unit for the top. Originated from K133, and we can also shorten it by 300 mm for K103. 40% cheaper than a new one from the manufacturer.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) Knsdpfeyq Stvsx Anwjc OPTION: Pneumatic centering attachement

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Kodpfswdutmsx Anwjnc Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Knsdpjx S Uuysfx Anwjc Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg Kedpozxc Rmefx Anwenc For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Ksdpfxen Nwdls Anwsnc Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg