Used Sawmill Alignment for sale (1,464)

Condition: new, The edger is used for double-sided edge trimming of boards and logs. The use of automatic width adjustment, smooth feed, and laser markings on the cutting guide enable optimal use of edged boards. Technical specifications: Minimum cutting width: 60 mm, maximum cutting width: 500 mm (horizontal clearance: 700 mm) Edge thickness: max. 65 mm Infeed table: 2000 mm Pick-up table: 2200 mm Distance between electric saws can be adjusted via the control panel Feed speed: uniform Saw diameter: 350 mm Number of saws on the spindle: 2 Main motors: 2 x 5.2 kW Machine weight: 1000 kg Gedpfx Afewb Uwgs Aska – Laser for marking the cutting line (2) – Electronic width measuring controller ANP 05

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices Gkodpfx Afezk Exds Aja 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs Gksdpfx Afsktg Sho Aea type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW Gedpfx Asmv Ekysf Aska two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel Gsdeyrdg Dspfx Af Aoka - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm Gjdpjy Na Hvsfx Af Aoka – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) Gkodpfxsv Hm T Ss Af Aoa - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: ready for operation (used), Year of construction: 2003, cutting length (max.): 6,500 mm, total length: 7 mm, total width: 1 mm, saw blade width: 45 mm, For sale: a used, self-propelled horizontal band saw. Band length: 5.020m, band width: 40mm. Capable of cutting logs up to 6.6m in length and 50cm in diameter. Gksdpfxozrw Uaj Af Aja The machine features a complete hydraulic system, log turner, and log aligner, and comes with a full set of accessories.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system Gkjdpfoztk Atox Af Asa The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), machine/vehicle number: 406341 S222 N7804, BRENTA ETYELEC Industrial Band Saw Robust industrial quality – built to last for generations For sale is a BRENTA ETYELEC industrial band saw, manufactured by Ateliers de Construction Louis Brenta SPRL (Belgium). This machine comes from a professional Dutch sawmill and was used reliably there for decades. It has been regularly maintained and is in good technical condition. Technical data Manufacturer: BRENTA Type: ETYELEC Motor power: 60 HP (approx. 44 kW) Speed: 340 rpm Band wheel diameter: 1,400 mm Heavy-duty industrial design Suitable for professional continuous operation Condition Band wheels overhauled New bearings on the band wheels Smooth and low-vibration operation Guides and idler pulleys in good condition Ready for immediate use Special features Godpfx Afezqmhge Aska We are deliberately waiting with the disassembly of the machine so that interested parties can still inspect and test the machine while it is running. This gives you the opportunity to personally verify the function, smooth operation, and technical condition of the machine. Advantages Extremely robust construction High cutting accuracy Easy-to-maintain design Proven BRENTA quality Suitable for soft and hardwood Ideal for professional sawmills and woodworking companies This machine was built in a time when industrial machines were designed for a lifespan of decades. Thanks to its robust construction and high-quality workmanship, it is still a reliable investment today. We will gladly provide you with the technical data, dimensions, and drawings upon request. Inspection and demonstration in running condition are possible by appointment. We are available for further information, additional photos, or videos.

Condition: used, Year of construction: 2006, For sale: LBL Brenta log clamping carriage – year of manufacture 2005 LBL Brenta log clamping carriage This LBL Brenta log clamping carriage has been completely overhauled and is ready for immediate use. The machine comes from a professional sawmill and was regularly maintained until it was dismantled. Equipment 4 independently adjustable clamping supports Integrated log turner Integrated flippers Distance between clamping supports: 2,300 mm – 1,800 mm – 1,400 mm New drive unit Gkodpfx Afex Ndpbo Aja Including rails and control panel Ready for immediate transport and loading This machine is ideal for the precise cutting of roundwood and impresses with its robust construction and the proven LBL-Brenta technology. Please refer to the attached PDF documents for the technical data, dimensions, and drawings. Inspection is possible at any time by appointment. We are available for further information, photos, or videos.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,000 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m Gsdpfx Aoyc Ncrjf Ajka - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Gsdpfx Aszfwl Esf Ajka Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Gedpfx Aezfwlfjf Aeka Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill plant featuring an EWD saw line for efficient industrial log processing. The system combines proven technology with continuous upgrades and is in excellent working condition. Cutting capacity: approx. 120,000 m³ roundwood per year The plant has been regularly serviced, professionally maintained, and is still partially in operation. Inspection during running production is possible by arrangement at any time. Availability: approx. June 2026 Scope of supply Log yard (infeed & preparation): • Sorting, measurement, and debarking line – SPRINGER (Year 2017) • Nicholson debarking machine (Year 1992) • Microtec measurement system (Year 2015) • 30 sorting bins • Cross-cutting plant (Year 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year 1999) • Profile chipping canter PF 19-3SP/V (Year 2003) • Secondary circular saw BNK 225/6 (Year 2003) • Complete mechanisation and control system • EWD Optimes BK-100B edger Lumber sorting & ancillary equipment: • 7 sorting bins with stacking system • Complete chip and waste wood removal system • Kiln drying chambers and heating system Gjdpfx Aozi D Dief Aeka Your advantages • Complete plant – ready for immediate operation • Proven industrial technology • Regularly maintained and modernised • Highly efficient in operation • Compact and high-performance design • Ideal for industrial lumber production General information • Main components built: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: possible during operation by arrangement This plant represents an economically attractive solution for companies looking for a complete, powerful, and immediately available sawmill line.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm Gkjdpey Uzhfjfx Af Aea - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Gkodpfx Afjzqz T Re Aja Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Godpfjzqz Sgox Af Ajka Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, functionality: fully functional, This is an older model in new condition (never used). It is a vibratory feeder designed to align and accelerate french fries for feeding onto a conveyor belt of an optical sorter. It can also be used for other elongated products that need to be aligned. The vibrating pan is made of rigidized 6WL sheet. Type of vibratory feeder: indirectly driven (consumes less energy than directly driven) Gjdpfeznclisx Af Ajka Drive: 2x unbalanced motor, 400V-50Hz Dimensions: Vibrating pan (internal): 610mm Vibrating pan length approx. 2,350mm Height approx. 1,200mm Material: Stainless steel 304

Condition: new, Year of construction: 2026, CORMAK E910 Band Sawmill for Wood The CORMAK E910 Band Sawmill is an advanced band saw designed for professional sawmill operations. Featuring a robust four-column frame, a large cutting capacity, and a reliable 7.5 kW (400 V) electric motor, it delivers precise processing of both softwood and hardwood. An integrated blade cooling system and reinforced cutting head guidance make the E910 one of the most efficient and durable band sawmills in its class. Key Advantages of the CORMAK E910 Maximum cutting width: 915 mm (without log guides), 750 mm (with log guides) – allows cutting of large logs while maintaining excellent stability. Maximum cutting height: 740 mm – adjustable cutting head enables precise cutting of materials with various cross-sections. Cutting length: 6,000 mm – suitable for processing long logs without the need for repositioning. Dynamically balanced cast-iron flywheels – ensure smooth, stable, and reliable blade operation. Manual feed and height adjustment – provide complete operator control over the cutting process and machine settings. Integrated blade cooling system – prevents blade overheating and extends blade service life. Blade guard – enhances operator safety in compliance with applicable safety standards. Rigid machine frame – minimizes vibration and ensures consistently straight, accurate cuts. Construction and Technology The CORMAK E910 is built on a rigid four-column frame with reinforced rear support, providing exceptional structural stability. It is equipped with a high-quality 35 mm wide, 4,013 mm long bandsaw blade operating at a speed of 20 m/s, ensuring fast, efficient, and accurate cutting. The cutting head is manually operated, giving the operator full control over the cutting process and allowing precise adjustment to different workpieces. As standard, the machine includes a 12-litre coolant reservoir, significantly reducing blade wear and improving cutting performance. Precision and Productivity Gsdjvvr Sxopfx Af Aska The CORMAK E910 has been designed for continuous operation in sawmills and wood-processing facilities. Its substantial weight (488 kg), wide rail base, and dynamically balanced flywheels provide excellent cutting accuracy and repeatability. With a maximum cutting thickness of 475 mm, the machine easily handles large-diameter logs. The kerf width of just 1.4–2.2 mm minimizes material waste and maximizes timber yield. Standard Equipment 4,013 mm bandsaw blade 6,000 mm rail track set Blade cooling and lubrication system Blade guard Adjustable log clamp/stop FREE bandsaw blade – machine supplied ready for operation Technical Specifications Specification Value Power supply 400 V Motor power 7.5 kW (10.2 HP) Maximum cutting width 915 mm Maximum blade height 740 mm Minimum blade height 55 mm Maximum cutting thickness 475 mm Maximum cutting length 6,000 mm Blade guard Yes Blade width 35 mm Blade length 4,013 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 20 m/s Kerf width 1.4–2.2 mm Coolant tank capacity 12 L Feed system Manual Machine dimensions (L × W × H) 6,000 × 1,980 × 1,810 mm Net weight 488 kg

Condition: used, functionality: fully functional, Used merry go round chipper canter line from the Austrian producer Lindner. The canter is equipped with two 37kw electric motors and the ripsaw with one 90kw electric motor. Very simple and good working line Reform knife grinder machine included. Loaded on truck. We can also include dismantling. Subject to prior sale. Gkedpjzrn Ecefx Af Aea

Condition: used, Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos Gedsiwuzaepfx Af Ajka -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system Gsdecp Nvyepfx Af Aoka -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: as good as new (ex-display), Year of construction: 2017, Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Gksdpok Abhlsfx Af Aja Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm alignment conveyor inclined roller conveyor 2900-700-685 RA2281 Make: Transnorm Year of manufacture: 2014 Roller width (RB): 685 mm Nominal/outer width (NB): 700 mm Length: 2900 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Gedpsru S Idefx Af Ajka Your specialist and contact for intralogistics