Used Screw Compactor for sale (5,859)

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Bdodpfj Ahppdjx Afgji Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2003, machine/vehicle number: AII 146363, Offer 26333 Bdedpfj Ahhykex Afgji Technical data: - Total operating hours: 56167 h - Operating pressure: 10 bar - Delivery rate: 14.5 l/s - Drive: 400 V / 7.5 kW - Space requirement: approx. W 950 x H 1250 x D 850 mm - Weight: approx. 250 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm Bdedpfo Agr Ewox Afgei - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: good (used), NNP Screw conveyor Stainless screw conveyor, total length 12500mm, screw diameter 240mm, also has discharge vales that allow for discharge of product every 1500mm, 3Ph Bjdpfo Ahkq Dex Afgjdi

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Bdsdpfxj Agw Dmo Afgoi Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, total width: 2,800 mm, total height: 3,000 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,600 kg, empty load weight: 3,600 kg, Equipment: documentation/manual, BERGMANN Roller Compactor, Roll Packer JRP 7700 - Wood and Pallet Compactor Description For sale is a robust BERGMANN Jumbo Roll Packer for shredding and compacting wood pallets and bulky wood waste, paper, and waste in open containers. Bsdpfx Afoz S N Svegedi The machine comes from an industrial group and was only used sporadically there. The heavy, profiled compaction roller breaks up the fed material and compacts it directly in the container. This allows for better utilization of the available container volume and reduces the number of required collections. Ideal for industrial and commercial companies, logistics companies, wood processing companies, and waste disposal companies. Condition Good, ready-to-use, and fully functional condition with typical signs of wear. Only sporadic use by the previous operator. Technical Data and Equipment Manufacturer: BERGMANN Designation: Jumbo Roll Packer Type according to operating manual: JRP 7700-42 Design: Stationary container compactor Drive: Electro-hydraulic Compaction: Profiled steel roller on the articulated arm Previous use: Wood pallets and wood waste Equipment: Hydraulic unit, control unit, and protective grating Available Documents • Documentation and operating manual • Spare parts list • Electrical wiring diagrams • Hydraulic diagrams Price: €14,900 net, negotiable, plus statutory VAT. Transport/shipping costs, collection. Freight transport by separate agreement; transport costs are not included in the purchase price.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Bodpfsyxpz Ujx Afgsdi

Condition: like new (used), Year of construction: 2025, operating hours: 778 h, functionality: fully functional, machine/vehicle number: 4152034870, overall weight: 610 kg, fuel type: electric, pressure (max.): 10 bar, noise level: 73 dB, type of cooling: air, Equipment: documentation/manual, type plate available, | Manufacturer | Schneider Druckluft GmbH | | Model | AMG 37S MEAA | | Type | Screw compressor | | Year of manufacture | 2025 | | Product number | 4152034870 | | Motor power | 37 kW | | Power supply | 400 V / 50 Hz / 3 phases | | Operating pressure | 10 bar | | Maximum pressure | 10 bar | | Air flow rate* | 5,700 l/min or 5.70 m³/min | | Weight | 610 kg | | Dimensions (W × D × H)* | 1,330 × 830 × 1,555 mm | | Noise level | 73 dB(A) | | Air connection* | 1¼″ | | Maximum ambient temperature | 40 °C | Bodpfx Afjz Tcl Eegjdi

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm Bdodpfx Aj Ahk Rrsfgoi

Condition: excellent (used), Year of construction: 2006, MAKE: WORTHINGTON MODEL: RLR50 SERIAL NO.: WCF250815 YEAR: 2006 POWER (kW): 37 OUTPUT (m3/min): 6.63 PRESSURE (bar): 8 OPERATING HOURS (LOAD/TOTAL): 81,296/97,527 FREQUENCY INVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON RECEIVER TANK: no DOCUMENTATION: no CONNECTION: 1 1/2 NEW/USED: USED Bsdpfx Aexyi Axsfgedi

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 120 mm, total width: 800 mm, power: 15 kW (20.39 HP), pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser SK25T screw compressor Bdjdpj Afc Dkofx Afgji SIGMA Control 2 compressor control system Equipped with ABT25 refrigerant dryer Operating pressure: 11 bar A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: excellent (used), Year of construction: 1999, operating hours: 43,019 h, functionality: fully functional, machine/vehicle number: 1127, overall weight: 750 kg, total length: 1,610 mm, total width: 970 mm, total height: 1,380 mm, power: 37 kW (50.31 HP), volume flow: 366 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER BS61 Screw Compressor 37kw 6.1m3/min 7.5bar. compressor For sale KAESER BS61 screw compressor in excellent condition. Maintained from new, serviced throughout. last major service performed at 86009 operating hours Manufacturer: Kaeser BS61 Bjdsydr Igopfx Afgodi Year of manufacture: 1999 serial number: 1127 Operating pressure: 7.5bar Power: 37 kW Capacity: 6.1 m3/min 366 m3/h Operating hours: standby: 86033h loaded: 43019 h Sigma Control control. engine speed: 1500 rpm Overall dimensions: 1610 x 970 x 1380 mm Tail weight: 750kg

Condition: repair required (used), Year of construction: 1991, Year of manufacture: 1991 Roll-off container system 20 m³ Year: 1991 400 V, 32 A, CEE plug 4 kW 4700 kg Bdedpfxe Aax I Ij Afgoi Requires repair: The locking mechanism needs to be made functional.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 1,080 kg, total length: 2,200 mm, total width: 1,300 mm, total height: 2,100 mm, power: 22 kW (29.91 HP), Frequency-controlled screw compressor, 22 kW, 4-in-1 With compressed air treatment for laser applications Bedpfx Afjzw A Tfsgsdi Attached refrigeration dryer Integrated 4-stage fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 2.3 m³/min at 1.6 MPa Integrated pressure vessel, approx. 550 l

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop Bdsdpfsz St Iuex Afgji - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, Machine: Zalkin CA12 Screw capper 12 heads Bdedo Ahk Hgjpfx Afgji

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,275 h, functionality: fully functional, power: 4.7 kW (6.39 HP), fuel type: electric, volume flow: 125 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, For sale is a used Kaeser SK 26 screw compressor from our company’s inventory. Manufacturer: Kaeser Type: SK 26 Year of manufacture: 2001 Operating hours: approx. 46,275 h Load hours: approx. 23,142 h Available from: December 2026 Bdsdpfoz R I Smjx Afgji The compressor is currently in use at our facility and will be available from December 2026. The unit has been used and maintained regularly and is in used condition, commensurate with its age. The compressor is currently ready for operation. On-site inspection is possible after prior arrangement.

Condition: used, Year of construction: 2017, functionality: fully functional, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Available quantity: 16 units Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Bdsdpfe Agp Hajx Afgji Rated current: 2 A Power: Typically 250 VA Protection class: IP42

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 200 mm Turning length: 650 mm Maximum turning diameter over bed cover: 200 mm Distance between centers: 750 mm Spindle Spindle head: Size 6 Spindle bore: 58 mm Control CNC path control: 2 axes Control system: Siemens SINUMERIK 5T Threading: available Motor control cabinet: Siemens 810T Tailstock Taper in tailstock quill: MK 4 Tailstock quill travel: max. 200 mm Tailstock travel: 550 mm Performance data Total power requirement: 18 kW Machine weight: approx. 2.7 t Machine dimensions Space requirement: approx. 2.70 × 1.58 × 1.68 m Control cabinet Bdsdpfj Aa Naujx Afgoi Control cabinet dimensions: 800 × 400 × 2,300 mm Control cabinet weight: 150 kg Motor control cabinet dimensions: 800 × 900 × 1,000 mm Motor control cabinet weight: 200 kg EQUIPMENT 4 chucks Spax screws Sheet metal screwdriver Drill Drill bits

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAS137 portable compressor – machine after a full service. Technical data: Bjdpfx Afj Af H Tcogedi capacity: 7.70 m3/min; operating pressure: 7 Bar; year of manufacture: 2015 engine: KUBOTA mileage: 1928h compressor is fully operational, ready for work, with warranty. net price: 48,500 PLN gross price: 59,655 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: used, Year of construction: 1991, machine/vehicle number: 336.533, set for 31,5 x 24 caps. 3 capping heads Bdjds Ahlddepfx Afgsi

Condition: like new (used), Year of construction: 1998, operating hours: 13,929 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.254 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: air, screw compressor TAMROTOR 110kW 7,5 bar 20,9m3/min Manufacturer: Garden Denver TAMROTOR Type: M110/7.5 EANA Air delivery: 20.9m3/min Year of manufacture: 1998 Bjdpfx Aety Nkwsfgodi operating pressure: 7.5 bar Engine power: 110 kW Revolution: 3453/min Network: 50 Hz 400 V Maximum operating temperature: 115°C Weight: approx. 2400 kg

Condition: used, Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, overall weight: 105 kg, power: 3 kW (4.08 HP), pressure (max.): 10 bar, ambient temperature (max.): 40 °C, Equipment: documentation/manual, type plate available, Atlas Copco GX4P EP screw compressor Bedpfx Afs Afc Nmsgodi Operating pressure – 10 bar 2200 operating hours A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: used, with 5 capping heads Bjdpfx As Ahlhtefgodi amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS186 portable compressor with aftercooler, fully serviced. Technical specifications: capacity: 10.50 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: DEUTZ, 104 kW operating hours: 1939 h Bede Af H Sxspfx Afgedi The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: PLN 109,500 Gross price: PLN 134,685 The machine was imported in excellent condition and has all the necessary documents for registration. Links to videos are provided below.