Used Screw for sale (5,113)

Condition: excellent (used), Year of construction: 2021, operating hours: 190 h, functionality: fully functional, Screw compressor Kaeser SX 3, year of manufacture 2021, operating hours under load: 190, 8.00 bar, SC2 400 V/50 Hz, effective delivery rate at 7.5 bar: 0.34 m³/min, rated power of the drive motor: 2.2 kW, dimensions W x D x H: 590 x 632 x 970 mm, weight: 140 kg, serial number: 1136-8192796, cyclone separator, manuals available. Pjdpszd R R Sefx Airsgn

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Final compression pressure: 10 bar, motor power: 110 kW. Includes refrigerant dryer. Pedpfx Ash Hi Inoirsgn Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Documentation available.

Condition: ready for operation (used), L & Z Spindle Lathe WEILER MATADOR, from a vocational school Pgjdpfx Ajzdzpljiren -Center height approx. 150mm -Swinging diameter over the carriage approx. 160mm -Swinging diameter over the bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600 kg Errors and omissions excepted.

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks Pjdpfxou R S A Ds Airogn High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – Podjy Dp Swspfx Airsgn ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: used, Year of construction: 2007, operating hours: 27,000 h, functionality: fully functional, machine/vehicle number: API454025, Oil-injected rotary screw compressor with integrated refrigerant dryer Pgedpfx Aiszd Avasrjn Atlas Copco, model GA 15 FF, year 2007, serial API454025, used ~27 000 h, With Atlas Copco Elektronikon II control unit The unit has been out of production since 2022. Last maintenance performed in the summer of 2019 / 23 460 h When wanted, a compressed air tank can be included. Pmax 7,3 bar – 105 psi Qv 43 l/s – 2,58 m³/min P motor 15 kW – 20 hp Packing and loading on trailer is including to price, Incoterms FOT

Condition: ready for operation (used), L & Z Spindle Lathe, WEILER MATADOR, from a vocational school -Center height approx. 150mm -Swinging diameter over cross slide 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal/facing feeds -Tailstock MK3 -Three-jaw chuck -Documentation Pjdpfszduyqjx Airsgn Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Subject to errors and omissions.

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pgedpfxstx Akne Airen Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter Pjdpfjqy E Evjx Airjgn - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: used, Stainless steel inline mixer, mixing screw, paddle mixer Diameter: 280mm Length: 3000mm Motor power: 2.2kW, 30 rpm Pgjdpfx Ajzc Idnoiren See our other listings. VMA Wekerom

Condition: used, Year of construction: 2019, REF: MM6433 Zhangjiagang Beverage Machinery Co. Ltd (Chinese) single-head screw cap capping machine. Model - FXJ-1. Serial number - ANGEL201909. Date of manufacture - 2019. Capacity - up to 1,500 bottles / hour. Belt width - 82mm. Electrical requirements - 380 V / 509 hz / 3 phase. Pjdpjza Ekgofx Airsgn Overall dimensions - 3000mm long x 900mm wide x 1910mm high.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Podpfx Ajyg Dl Asirjgn Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, I am selling: TRASMEC COC800DN Mobile Screw Loader/ Conveyor in a good working condition. Manufactured in 2009 by the well-known Italian conveying equipment manufacturer TRASMEC S.r.l. Suitable for handling wood chips, sawdust, biomass, shavings, pellets, compost, and other bulk materials. Ideal for sawmills, pellet plants, biomass facilities, recycling operations, and wood-processing companies. Specifications Manufacturer: TRASMEC S.r.l. (Italy) Model: COC800DN Year of Manufacture: 2009 Serial Number: AL0581C-C006603 Mobile wheeled design Heavy-duty steel construction Industrial screw conveyor system Electric drive CE-marked European equipment Condition Used industrial equipment Structurally sound Applications Wood chips Sawdust Biomass Wood shavings Pellet production Compost and organic materials Bulk material handling Pjdpfx Aiszcu Hvjrjgn

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. Pgsdpfx Aieu Szlusron *

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Pgodpsyzzh Esfx Airsn The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Number of working hours: 2195 h machine weight approx.: 194 kg dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. Podjxrdw Ispfx Airegn *

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar Psdpfxju Nz Dne Airogn volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m Pjdpfx Aieu Nz D Uorjgn SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition Podpfx Aiju Nzyporjgn We don't sell spare parts nor have spare parts available! *

Condition: new, Year of construction: 2022, operating hours: 2 h, PROD. ATLASCOPCO TYPE GA30VSD S/N API470017 YEAR 2022 POWER (kW) 30 CAPACITY (m3/min) 6.6 DISCHARGE PRESSURE (bar) 10.5 HOURS (RUNNING/TOTAL) 2 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air Pjdpfx Aezdzr Toiregn

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Pjdpfjdvm Euex Airogn Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, Pgsdpfx Asx Dihcjirjn - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: excellent (used), Year of construction: 2012, operating hours: 29,610 h, functionality: fully functional, Screw compressor, Atlas Copco GA55+FF Dryer integrated 55 kW 8.20 bar 10.44 m3/min Podpfxey Urx Io Airjgn Year of manufacture: 2012 Operating hours: 29,610

Condition: excellent (used), Year of construction: 2000, volume flow: 1 m³/h, KAESER AIRCENTER SM 11 screw compressor Engine: 7.5 kW Pgjdszdrbrspfx Airon Capacity: 1.00 m3/min Pressure: 10 bar COMPRESSOR IN FULLY WORKING CONDITION.

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Pgodpfxezdcdro Airon Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug.