Used Signa Station for sale (4,877)

Condition: good (used), Year of construction: 2002, Transformer 400 kVA Own weight: 1410 kg Loading and shipping are possible! Please arrange an appointment for inspection in advance! Gedpfx Aovnifgef Aoka

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us. Gedpfx Afjyimqws Aeka

Condition: used, This listing is for a Hirschman pipetus with charger station Gjdpfx Ajxv Dznof Aeka The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Perkin Elmer The Protome Works System Mass PREP Station Robotic Protein Handling System. Gedpfx Afexzhucj Aska

Year of construction: 1996, condition: good (used), machine/vehicle number: 25295, Capacity (mm): 24x150 Production (max): 120 ppm Gjdpfxsdv T Hlj Af Ajka Optional Warm Former

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Gkedpfx Afsfhb Tko Aoa

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Gkedpfxewyn S Us Af Aea Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Gksdjxrpm Uspfx Af Aoa Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Godpfxecx R D Hj Af Aeka Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Gjdpox H Al Ajfx Af Ajka Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: used, Big bag discharging station Adjustable to different heights Equipped with lifting yoke for forklift Gkedpfxeyt N N Te Af Aea Fitted with steel hopper and vibrating motor

Condition: excellent (used), Year of construction: 2005, 19 stations design: cassette shaft Ø: 30 mm strip width: 200 mm Godpfx Afeh Tm Ras Aeka strip thickness: 1 mm

Condition: excellent (used), Year of construction: 2005, dual track rollforming line Gedpfoh Tm Rlox Af Aska 2 x 18 stations design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: used, This listing is for a Tecan Genesis 150 2002 Liquid Handling Station - SPARES ONLY Gksdpexzg I Uefx Af Aoa

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Gedsx R U Nuepfx Af Aeka Withdrawable carriage: Present, front side

Condition: good (used), Year of construction: 2008, functionality: fully functional, Automatic binding, stitching, and cutting machine (VSHRA), designed for serial production of brochures bound with wire staples. Gkjdsyb Tcaspfx Af Aea Working condition 4 automatic feeding stations for signature insertion. Maximum trimmed format: 30.5 x 34.9 cm. Minimum trimmed format: 8.9 x 12.0 cm. No documentation available.

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Gkedpfx Afoulnrvj Aja

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: OPC3004-41, Equipment: CE marking, The Manuel Print Station is designed to efficiently print labels and inspect your cartons to ensure accurate serialization identification. Godpfjy D I Iqex Af Aska Machine dimensions: Length: 1419 mm Width: 868 mm Height: 1731 mm Weight: ~160 kg Noise one meter from the system: Less than 70dB Electrical Requirements: 120/220-240 Vac 1 Phase 10 A / 120V / 5A / 220-240 V 50 or 60 Hz

Year of construction: 2008, condition: good (used), Automatic unloading at the end of the line max. magazine size: 360mm x 360mm x 570mm Gedpfx Afsy Au Sto Aeka min. PCB size: 80mm x 50mm transport height: 950 +/-20mm

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 240 kg, total length: 1,213 mm, total width: 804 mm, total height: 1,856 mm, The ibg eddyrobot is a modular, semi-automatic system for eddy current crack and grinder burn detection. Equipped with the eddyvisor C and supporting up to four interchangeable ET probes, it delivers industrial-grade accuracy and flexibility. Its compact and mobile design makes it ideal for use on production floors, in laboratories, or for standalone inspection tasks. Gkjdpey H Dfdofx Af Aea Key safety features include an electromechanical lock and emergency stop to ensure operator protection. The user-friendly interface enables straightforward operation, while the integrated ibg eddyvisor C with differential crack test probe provides precise and reliable inspection results. The system also features a flexible probe station that stores up to four ET probes, allowing for automatic probe changes via the robotic arm. At the core of the system is a Mecademic Meca 500 six-axis industrial robot featuring ±5 µm repeatability, ensuring consistent and repeatable test procedures. The entire unit is managed by a Beckhoff PLC. For mobility, the eddyrobot is mounted on 100 mm rubber wheels (two of which are lockable), and includes a handle and corner protection. Its compact footprint allows easy passage through standard doorways. For more information, please visit our website.

Condition: new, DOPAG Micromix The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled. Gksdexcgpzjpfx Af Aea

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Weather-Independent Butt Fusion Welding at Industrial Standards Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: Gksdpfx Ajyzn Ifsf Asa The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Condition: new, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 4,325 mm, overall weight: 3,500 kg, first registration: 04/2026, next inspection (TÜV): 04/2028, fuel tank capacity: 93 l, emission class: euro6, color: white, suspension: steel, tire size: 235/65 R16C, number of seats: 9, Year of construction: 2026, fuel: diesel, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, summer tires, traction control, trailer coupling, truck registration, MB 319 L3H2 9-seater Mercedes Benz Sprinter 319 Bluetec ♦ EURO 6 ♦ Seats: 2+7 (9) ♦ M1 COC/2007/46 for 3.5t ABS, ASR, ESP, HSA, OBD Driver airbag Power steering Central locking Immobilizer Key with remote control Active Service System "Assist" Additional air conditioning for the passenger compartment Additional hot water preparation Tire set 235/65 / R16C Sliding doors on the right First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), chock 7 M1 seats, manufactured by SEGE 2 seats equipped with ISOFIX Seats equipped with: armrests, 3-point seat belts, handles Seats made of artificial leather, black with silver elements Seats mounted on a rail system Fixed partition – separation of passenger and luggage compartment Tinted windows (mounted in original Mercedes seats) Gkedpoigmy Rsfx Af Asa Curtains in the windows LED lighting Microphone on a cable USB chargers in the interior 4 x speakers in the passenger compartment Fixed steps on both sides of the vehicle Seats upholstered in the leg area ♦ New vehicle. Without registration, with a 2-year warranty. ♦ All vehicles have the necessary documents and possess the European certificate COC / 2007/46 for M1 3.5t. Available in 2 months. Delivery, leasing or financing possible. Contact us: Auto-Wardenga Irenäus Wardenga

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: TSH 071, overall weight: 44 kg, input voltage: 220 V, input frequency: 50 Hz, Used Pfeiffer TSH 071 “Turbo Cube Drag Pumping Station”, portable turbo vacuum pump Manufacturer: Pfeiffer Gsdpfx Afexqprze Aska Model: TSH 071 Voltage: 190-260V (50/60Hz)

Year of construction: 1979, condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Godehg Nkrjpfx Af Aeka Units: 1x spindle unit, 1x slide unit, 8x quill units Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm Max. Drilling capacity in steel: 16mm