Used Silicone for sale (157)

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi Chedpfx Aijwqx H Reksa • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. Cjdsyalqyopfx Aiksha multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). Cedpfx Aijzlccijkoha The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Smoothing Machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed speed, max. 140 m/min Top pressure rollers with drive, x 6 Pressure force adjustment via pneumatics Bottom rollers with drive, x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste. - Robust and efficient transport system with 6 motorized pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of bolo, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via No. 6 bottom metal rollers and No. 6 top rubber pressure wheels, variable with adjustable speed via an inverter. The top pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the top pressure wheels and appropriate independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm Codpfjytc Rkjx Aikoha - Weight: 280 kg 2. MAKOR ST/100 FOIL SLITTER, price €1,200 3. MAKOR TEP 3000 BELT CONVEYOR, price €700

Year of construction: 2001, condition: used, functionality: unexamined, Hot stamping foil applicator for strips MAKOR, model DORA 7, year of manufacture 2001, price €19,100 OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm Chjdpfjytc E Uox Aikja - Weight: 280 kg 2. MAKOR ST/100 foil slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700

Condition: used, Year of construction: 2006, overall weight: 1,200 kg, Slitter/cutter for moldings, MAKOR SAP 30 This machine is ideally suited for slitting wood moldings and MDF boards. Year of manufacture: 2006 THE FOLLOWING MACHINES CAN BE PURCHASED SEPARATELY AT INDIVIDUAL PRICES: 1. Profiling machine for abrasive wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 Csdpfsytc Ivjx Aikjha - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiling wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm - Weight: 280 kg 2. FOIL SLITTER, MAKOR ST/100, price €1,200 3. BELT CONVEYOR, MAKOR TEP 3000, price €700

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space volume: 22 m³, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, tail-lift, Welcome to carmax24! Today you have the opportunity to purchase one of our carefully selected and inspected vehicles. Independently assessed and high-quality vehicles have ensured a high level of customer satisfaction since 2008. That is our daily approach, as you as a customer are always our top priority at carmax24. Specification | Renault Master L3 Engine & Drivetrain * Blue dCi 170 HP (125 kW), Euro VIe * 6-speed manual transmission * Front-wheel drive (FWD) * Diesel, AdBlue Codpfx Ajzhq Tueikeha Exterior * Color: Mineral White * 16'' steel wheels with hubcaps * LED daytime running lights and dipped beam * Partially painted front bumper * Extended exterior mirror arms * Electrically adjustable & heated exterior mirrors * Single rear wheels Interior & Comfort * CORE fabric upholstery * Manual air conditioning * Suspended driver’s seat * Double passenger bench – “Mobile Office” * Multifunction steering wheel, adjustable for height & reach * Electric front windows * Central locking * 12V power socket * 3.5'' TFT driver display Multimedia * OpenR Link multimedia system with 10'' touchscreen * Wireless smartphone mirroring * Inductive smartphone charging station Safety & Assistance * ABS, ESP, ASR * Emergency brake assist * Lane departure warning system * Traffic sign recognition * Fatigue alert * Cruise control with speed limiter * Tire pressure monitoring * Rain & light sensor * Rear parking sensors * Driver airbag * Wide-view interior mirror Cargo Area & Body * Steel bulkhead with window * Conversion package (body preparation): * Extended wiring (+65 cm) * eCall antenna integrated in the exterior mirror * Connector in B-pillar * Towbar pre-installation * Full-size spare wheel * Steel sump guard Body – Platform body with tarpaulin (9 pallets) * Platform/tarpaulin body on Renault Master L3 FWD * Designed for 9 Euro pallets * Suitable for transport, logistics, and trade businesses Construction & Materials * Aluminium sideboards, height 400 mm, symmetrically split * Vertical cassette locks * Floor made from non-slip phenolic plywood, 15 mm * Waterproof, film-coated underside * Sealed with silicone * Subframe and longitudinal beams made from aluminium profiles (System 70/90) * Foldable entry step at rear tailboard * Cab rear wall protection made from three-part aluminium profiles Tarpaulin & Frame * Aluminium stanchions, upper frame, and tarpaulin support bows * Customs-compliant tarpaulin, silver color (RAL 9006) * Tarpaulin weight: 670 g/m², manufacturer SIOEN * Semi-transparent tarpaulin roof for improved lighting Load Securing & Protection * 10 steel lashing rings mounted in the surrounding profile * Plastic wheel arches with mud flaps * Wooden interior slats, 3 rows in height Additional Body Features * Side underrun/forklift protection beams, foldable * Quick-release center stanchions * Toolbox approx. 45L * Water tank with faucet and soap dispenser * Extended rear light bar (steel, galvanized, painted) * Adjustable internal height (CARPOL system, lift approx. 30 cm) * BAR tail lift, covered by tarpaulin * LED interior lighting in cargo area * Additional vehicle battery * Tachograph * Reversing camera Body Dimensions (Internal) * Length: 4,500 mm * Width: 2,200 mm * Height: 2,300 mm Body Dimensions (External) * Length: 4,550 mm * Width: 2,270 mm * Height: 2,360 mm

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: E0062793, Design Semi-automatic self-cleaning permanent magnet Pneumatic cleaning Stainless steel design CE compliant For continuous industrial applications Performance data Maximum flow rate: 65 m³/h Minimum separable iron particle size: 30 µm Maximum particle size: 10 mm Maximum operating pressure: 2 bar Maximum product temperature: 60 °C Ambient temperature: -10 to +60 °C Materials Product-contact parts made of stainless steel AISI304 / AISI316L Housing made of stainless steel AISI316L Food-grade silicone seals (FDA / EC1935/2004) Connection Flange size: 300 × 300 mm Installation length: 145 mm Codjzhmkpjpfx Aiksha

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, CEROX 1000 Hot Stamping / Thermal Transfer Printing Machine — 1999 Csdsy Eyicspfx Aikeha Brand: CEROX Model: 1000 Year: 1999 Type: Thermal transfer printing machine Cycle counter: 130,342 cycles Compatible surfaces: Cylindrical, oval, and irregular shapes (ideal for bottles and jars) Controller: Telemecanique Dimensions: 1,900 x 2,500 x 1,870 mm Includes: ✅ Aluminium tooling ✅ Silicone tooling ✅ Consumables and spare parts ✅ Sample engravings Condition: Good Location: Albacete, Spain Available for inspection by appointment VAT invoice available

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Chsdpfx Aev Sq Nbjikja Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2003, condition: used, Technical details: rated capacity: 175 kVA flow rate: 100 m³/h revolution per minute: 1500 U/min connection voltage: 400 V dimensions L x W x H: Container: 3,0 x 2,6 x 2,6 m Gas purification plant incl. container Application: For purification of sewage gases from organic silicon compounds and hydrogen sulfide. Gas pressure boosting plant make Muche GmbH Scope of delivery ivated carbon filter Cooling Danvoss; air consumption 2.800 m³/h; refrigerant R 134a Heat exchanger Renzmann&Grünwald Condenser ID Compressor MTZ22-4VI Cjdpfxou Nvb Is Aikeha control cabinet incl. documentation, for sale as is. *

Condition: used, -Dimensions: 1420x2600x2200mm Chedpfx Aey H Ebmeikea -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Wiring looms made of high-temperature silicone cables

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW Cjdpfx Aewxl H Heikjha -Voltage: 400 V -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie -Burner: C10 gas -Insulated with rock wool panels -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck -1 independent steam generator per deck -Thermal treated glass to reduce heat loss -Steam unit and column always on the same side Chedpfey H D A Asx Aikja -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses

Condition: used, -Dimensions (LxWxH): 1420x2200x2200 mm -Serial number: 8801680 -Reference number: 7367165 -Baking surface: 5.3 m² Csdpfx Aijy Icknekjha -Stone slab dimensions: 801x1230 mm -Year: 2005 -Number of decks: 5 -Maximum temperature: 300°C -Voltage: 400V -Heating power: 53.6 kW -Weight: 1064 kg -Refurbished equipment: Equipment is prepared upon order; lead and turnaround times are specified at that moment (please request pricing after refurbishment) -Front panel with brushed stainless steel extraction hood -Heavy refractory cement baking soles, 20 mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief damper per deck -1 independent steam generator per deck -Glazing treated to reduce heat loss -Steam system and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Electrical bundles with high-temperature silicone cables

Condition: used, Year of construction: 2018, Glass dimensions: Max. Glass width: 1200 mm. Max. Length: 1200 mm. Max. Glass thickness: 12 mm. Codpfeww Ih Dex Aiksha Min. glass width: 150 mm. Min. length: 300 mm. Min. glass thickness: 3 mm. Silicon carbide or diamond belt size: 3350 mm long and 100 mm wide. Electrical connection values: 400V, 50/60Hz, 3 phase 13 kW/23.5 A Max. Height of the system: 1900 mm. Max. Max. depth of the system: approx. 2000 mm. Max. Max. width of the system: 3250 mm. Condition: very good, second-hand

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation Csdpfx Aiszga H Iskeha ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: J35017891010001, power: 835 kW (1,135.28 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 4,500 kg, protection type (IP code): IP56, Inverter-Duty Induction Motor. Csdpfxex Af D De Aikoha The equipment served as a spare motor for a silicon production facility. the motor has been kept in storage and maintained according to maintenance schedule.

Condition: excellent (used), Year of construction: 2006, 2-component extruder Originally built for Silicone, but used for Polysulphide Can be easily made to work with Silicone Chjdozdyvwspfx Aikea Hydraulic More technical information can be found attached as Tech. data file Excellent condition Good working order, tested As is Available immediately

Condition: new, driver cabin: other, gearing type: other, Vehicle location: en route / in transit Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg Technical data: Max. flow rate: 1800 l/min (108 m³/h) Max. suction height in m: 8 Suction diameter (mm): 100 Discharge diameter (mm): 100 Chodpfx Aioi Rqr Toksa Particle size (mm): 20 Self-priming: yes Weight approx. kg: 90 Dimensions L x W x H in mm: 715 x 570 x 590 Motor type: 1-cylinder, 4-stroke S.V. Motor: KOHLER KD350 C5 Autonomy (h): 4.3 Fuel: Diesel Tank capacity (liters): 4.3 Starting system: Recoil starter Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm Cedpfshvu Tmjx Aikeha with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 24006414, • Ultimate on-site metal testing capability with 46 elements in 16 metal matrices in 2 seconds for most elements, 7 seconds for light elements (e.g., Al, Si, Mg); on-site calibration for elements and applications not covered by factory methods. • Designed for all-day single-hand use: Balanced, size-optimized, comfortable, easy-to-read display; quick-action software: powered by Android, designed for touch operation, quick access to all functions. • Data & documentation everywhere: GPS for location, cameras for visual records, WiFi, Bluetooth, USB, and microSD for documenting and transmitting results. Lab-on-the-go: from handheld to a mini-lab system when connected to the docking station with a sample chamber. The all-new SPECTRO xSORT model XHH04 is packed with a host of new features and designs to maximize user speed, ease, and convenience – along with advanced analytical performance. Codpfx Aiezgbwbokeha This innovative handheld XRF gun analyzer quickly handles just about every on-site metal testing need imaginable, from the scrapyard or factory to the foundry floor. Powerful, flexible SPECTRO xSORT XHH04 provides outstanding coverage across the spectrum for all common types of metals and alloys – including 46 elements in 16 metal matrices. All without requiring operator decisions. And if an uncommon element or application is not factory-installed, the SPECTRO xSORT XHH04 handheld analyzer provides experienced users with a smart on-site calibration option on the PC. The SPECTRO xSORT XHH04 delivers high-throughput, highly reliable elemental testing and spectrochemical analysis of countless metals and their alloys under widely varying conditions. FAST Entry-level SPECTRO xSORT Alloy delivers metal grade identification in a few seconds. The even more powerful standard SPECTRO xSORT analyzes most alloys in only 2 seconds! Even alloys with light elements (aluminum, magnesium, silicon, phosphorus, sulfur, etc.) can be identified in 7 seconds. As a result, plant personnel or contractors can complete hundreds of inspections per shift – boosting productivity and profitability. EASY Reduced in size and better balanced than previous models, SPECTRO xSORT is optimized for day-long, fatigue-free, one-handed operation. The ergonomic design includes a light-squeeze trigger, a 5” large, easy-to-read, wide-angle, high-definition display, extra physical buttons ideal for gloved hands – and a smaller probe head for access to tight spaces. Results: effortless operation with all-day comfort. FLEXIBLE Factory methods offer maximum analytical flexibility, with 2 collimator spot sizes (3 mm and 5 mm). Users get ultra-wide coverage of elements and alloys, plus sample sizes. And operators don’t have to switch methods between samples.

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Chjdpfx Aisy D Ugyekea Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: limited functionality, Equipment: documentation/manual, Title: Demak CV4 Omni Smart FL 500.50.20.xyz CNC Dispensing & Potting Machine (2016) – Low Hours, CE Certified. Short Description: High-end, industrial CNC dispensing and potting machine manufactured by Demak (Italy). This premium unit is specialized for precise encapsulation with epoxy, polyurethane, or silicone resin. The machine is in excellent, near-new condition with very low operational hours. Fully functional, CE certified, and ready for immediate deployment in electronics (PCB potting), automotive, or LED manufacturing. Technical Specification: Manufacturer: Demak (Italy) Model: CV4 Omni Smart FL 500.50.20.xyz CNC Year of Production: September 2016 Condition: Excellent, rarely used (very low operating hours) Working Area: 500 mm (X/Y/Z CNC controlled axes) Heating System: Equipped with 2 curing/pre-heating ovens for alternating operation (ensures non-stop, continuous production workflow) Cedezc Nnhspfx Aikeha Control System: Advanced CNC control for complex potting trajectories (lines, dots, circles, 3D potting) Safety & Legal: Full CE Certification, complete original user manuals, and technical documentation included. Commercial Terms: Location: Poland (ready for inspection under power). Price: 89,000 EUR (Net, excluding VAT). Transaction: 0% VAT for EU companies with a valid VAT-ID (Intra-Community Supply). Delivery Terms: EXW (Ex Works) – Assistance with loading onto a truck can be provided.

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Chedpsy Dvpvefx Aikea Electrical documentation available