Used Sleeve Mandrel for sale (1,173)

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Rsdpfjuudrkox Abmsbt Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: like new (used), Year of construction: 2025, operating hours: 890 h, functionality: fully functional, total length: 550 mm, total height: 220 mm, total width: 120 mm, warranty duration: 6 months, type of input current: three-phase, product height (max.): 22 mm, product height (min.): 50 mm, product length (min.): 30 mm, product length (max.): 18 mm, product width (max.): 12 mm, product width (min.): 30 mm, input voltage: 220 V, compressed air connection: 3 bar, input current: 25 A, Automatic Shrink Sleeve Applicator with Auto Feeder & Heat Shrink Tunnel – Under Warranty Year of manufacture: 2025 Condition: Excellent – barely used Operating hours: Approx. 890 hours Availability: Immediate Machine Description Automatic Shrink Sleeve Applicator & Auto Feeder complete with Heat Shrink Tunnel, designed for high-efficiency cup labeling lines. The machine is equipped with an auto cup collector and counting system, ensuring smooth downstream handling and accurate output control. The system also includes 2 pre-shrink locking hot air guns, providing precise sleeve positioning before entering the shrink tunnel, resulting in clean, consistent sleeve application. Key Features: Rbsdpfx Aexw Eulobmjt Fully automatic shrink sleeve applicator Automatic cup feeder Heat shrink tunnel Auto cup collector with counting system 2 pre-shrink locking hot air guns (Leister made in Switzerland) Stable and reliable operation Suitable for yogurt cups and similar containers Condition & Maintenance: Barely used (only 890 working hours) Very well maintained Under manufacturer warranty until August 2026 All accessories, tools, and original components included Included with the Machine: Full set of spare parts Complete catalogs and manuals All original accessories and tools Training support for operators Delivery and installation assistance if required Up to 80 KG of shrink sleeve roll can be provided for machine trials, testing, and initial settings Reason for Sale: Offered for sale due to the bankruptcy of our main client. The machine is not being sold due to any technical or performance issues. Inspection & Support: On-site inspection available Video call walkthrough is possible Assistance with transport, logistics coordination, and documentation Shipping assistance can be provided worldwide Additional Information This is a turnkey, nearly new shrink sleeve labeling solution, ideal for manufacturers looking to expand capacity or replace equipment without the cost and lead time of purchasing new. 📩 Serious inquiries only. Additional photos, videos, and technical details available upon request.

Condition: good (used), Manufacturer: Optimum Type / Model: DDP 50 Rbedpfordgrkex Abmot Pressing force: 1.5 t Table: mm ram: 50 x 50 x 647 mm Projection: 226 mm Lever length: 850 mm Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Used rotary hearth furnace with mandrel hardening press Make: Aichelin and mandrel hardening press MAP DHM 1-350 S / year of manufacture: 2004 Rbodpfjw Rrxfox Abmot Type: Rotary hearth furnace Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, Rbjdpfxsvtgn No Abmjt angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, TECHNICAL DATA & EQUIPMENT: Suitable for flat material Working length: approx. 2500 mm PICK-UP NOTES: Redpfx Ajxm Symjbmobt Collection must take place strictly between December 10th and 12th FCA Winterlingen, loaded onto truck

Year of construction: 1986, condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm coil weight: 0,5 t mandrel Ø: 304 mm Rbodpfxsbh Ucbo Abmjt

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm Rbjdpfx Absdn I Hrsmst strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm Rodpfxebh S Dpe Abmebt coil weight: 2 t mandrel Ø: 406/508/610 mm

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Rbjdpfx Aebh Ubwsbmst mandrel Ø: 508 mm

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm coil weight: 7,5 t mandrel Ø: 508/610 mm Rbedpfx Absd Ha E Ajmjt

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Rjdobh S Hkjpfx Abmsbt Coilgewicht: 4 t Dorn-Ø: 508 mm

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm Rbedpfx Ajg Ewanjbmet strip thickness: max. 3,5 mm coil weight: 20 t mandrel Ø: 600 mm

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm strip thickness: 0,5 - 4 mm Rsdjd Ha Hbepfx Abmebt coil weight: 10 t mandrel Ø: 406/508 mm

Year of construction: 1995, condition: good (used), strip width: max. 1.900 mm Rbodpfx Abjg Iigvjmst strip thickness: 0,3 - 3 mm coil weight: 25 t mandrel Ø: 508 mm

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t mandrel Ø: 450 mm Rbjdpfx Asbh Sz Sjbmot

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm Rbjdpfx Abobh S Dyomet strip thickness: 0,4 - 8 mm coil weight: 13 t mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm coil weight: 5 t Rodpjbh S E Ejfx Abmsbt mandrel Ø: 406/508 mm

Condition: used, functionality: unexamined, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Rbedpfx Abswtnnpomet

Condition: used, functionality: unexamined, Ferwood Code: RU0011652 - Manufacturer Code: K6343K0944 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Rbedpfx Abowtzcyomjt

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t Rbsdpjd Ha E Ssfx Abmot mandrel Ø: 508 mm

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm Rjdpfx Asd Ha E Iobmsbt strip thickness: 0,5 - 3 mm coil weight: 6 t mandrel Ø: 508/610 mm

Condition: excellent (used), Abrasive mandrels ,different sizes also single to give away. Diameter : 8-10-12-13-14,8-15-16-17-18 mm price piece 10 Euro Diameter : 20-22-25-28 mm Price per piece 12 Euro Diameter : 30-32-34-35-36-38-mm Price per piece 15 Euro Diameter : 40-42-45-48 mm Price per piece 20 Euro Diameter : 50-52-55 mmPrice per piece 25 Euro Diameter : 60-62-65-68 mm Price per piece 30 Euro per piece Diameter 70 mm price per piece 40 Euro Diameter 80 mm price per piece 50 Euro We are also happy to offer you a package price. Rodpfxok R Tnpo Abmjbt

Condition: used, functionality: fully functional, Year of construction: 1991, load capacity: 10,000 kg, empty load weight: 1,015 kg, total length: 1,690 mm, Carrying mandrel Rbedpfxju Dztfe Abmst Load center: 850 Condition: Ready for use and fully functional Technical condition: good Description: Length: 1690 mm Diameter: 400 mm

Condition: used, functionality: fully functional, load capacity: 16,000 kg, total length: 1,500 mm, Carrying mandrel Condition: Ready for use and fully functional Rbjdpfxsu Dzuvs Abmet Technical condition: very good Description: Length: 1500 mm Diameter: 350 mm