Used Slitting Mashine for sale (304)

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils Ledpfx Astvdy Iefusrt OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm Ledpfx Afjqw Aacouort coil weight: 40 t coil ID: 508/610 mm

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm Lrjdpexc Ht Tsfx Afuet speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm Lodpfoxc Hyyjx Afuort speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: used, SCOPE OF SUPPLY: Lrjdpfxsymcf Ue Afujt - Uncoiler - Introduction and Pre-Straightening Group - Leveller - Looping Table for Automatic Cutting - Cross-Cut Shear - Measuring Table - Exit and Stacking Roller Table Coil weight: 5 Tn Coil width: 650 mm Thickness: 0.3 - 2.5 mm Coil external diameter: Max. 1500 mm Mandrel diameter: 480 - 520 mm

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Ledpfxezrzk Ej Afuort Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Lrjdsqw Akmspfx Afuot strip thickness: 3 mm coil weight: 10 t

Condition: excellent (used), Year of construction: 1980, strip width: max. 1.750 mm Ledpfx Aoxaz Sfsfusrt strip thickness: 0,5 – 3 mm speed: max. 160 m/min No. of pinch rolls: 2

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Ljdpfx Ajzzff Sjfuert Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Lodezilvgepfx Afuort Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Rewind shafts: Dual rewinding shafts Max mechanical speed: 400 m/min AC Servo motor with tension control Ljdpfx Ajwvv Hfsfuort Web guiding Material types BOPP, PET, PE, laminated film, foil, paper

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. Lsdpfx Afoyzbzrouert TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. Lredpsyx Uy Ajfx Afust • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, CUT-TO-LENGTH LINE IPM 1250x1.5x15 Technical data Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm Scope of supply 1. Uncoiling cantilevered mandrel with hold down roll 2. Guiding table 3. Levelling machine 4. Loop pit with tiltable covers Lodpoymb Arofx Afuort 5. Start-stop shear 6. Band conveyor 7. Stacker for 400 – 5000 length bundles 8. Switch cabinets & control desks 9. Hydraulics 10. Existing documentation 11. Hydraulics Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ljdpfx Aettlfkefuort Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty Lredpfxeykz Ebo Afuet - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 Lredpsyapy Eefx Afust - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Lsdpfogryk Nox Afusrt

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; Lrsdpfswd E N Ejx Afujt 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: • Unwinding unit Lodpfx Afjzrxdpeusrt • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm Lredpfx Afoqh Efisuet -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Last intended use (Jan. 2024): - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex Ljdjw Rlnajpfx Afujrt - Collection in can - Accessories/spare parts partially available The machine has been dismantled and stored, but can be inspected on site. Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Enquiries in writing only, please.

Year of construction: 1980, condition: ready for operation (used), Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-550mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible. Lredpfsyi E E Aox Afust

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: S/N78757, total width: 1,850 mm, total length: 1,850 mm, total height: 1,650 mm, space requirement width: 10,000 mm, space requirement length: 52,000 mm, space requirement height: 3,000 mm, type of input current: AC, operating speed: 5,580 mm/s, input voltage: 440 V, The Sheet Wizard 1850 dual rotary sheeter is engineered to accommodate a variety of application requirements. This versatile and standardized sheeter features dual rotary knife technology, providing exceptional cut quality for materials up to 1000 gsm. The machine is capable of operating at a maximum speed of 335 meters per minute (1100 feet per minute). Unwind System Six shaftless floor pickup unwinds are designed to handle rolls with a diameter of up to 83 inches. The system supports core sizes ranging from 3 inches up to 12 inches, ensuring flexibility for different roll specifications. Decurling and Tension Control Each unwind is equipped with overhead decurlers and tension controls, maintaining optimal sheet flatness and consistent tension throughout the process. Alignment and Splice Management The machine incorporates FIFE alignment technology and a splice sensor detector, which automatically discards joined sections to ensure product integrity and continuous operation. Ledpsy Dkikofx Afujrt Slitting Capabilities The Sheet Wizard includes a double set of four slitters, each capable of cutting up to 600 grams. This arrangement allows for efficient slitting and high throughput.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LabelCut R20s by Rotutech is offered for sale: a rotary label finishing and die-cutting system designed specifically for digital production environments requiring high precision, fast setup, and reliability, especially for short and medium runs. This solution is ideal as a complement to digital presses, optimizing the print → finish workflow with a compact footprint and very simple operation. The machine is in good working condition, ready for production, and can be inspected and tested without commitment to verify its performance and finishing quality. Main features: - Rotary finishing and die-cutting system for self-adhesive labels on roll - High-precision rotary die-cutting Lodpoy Ry Uvefx Afuert - Configured for continuous production with excellent stability - Quick and easy job changeovers - Ideal for variable data jobs and personalization - Unwinder with tension control - Rotary die-cutting station - Longitudinal slitting - Final label rewinder - Independent waste (matrix) rewinder Compatible materials: - Self-adhesive papers - Common plastic films for labels (PP, PET, PETG, etc.)