Used Spark Erosion Edm for sale (698)

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Dedpfxovb Hbrs Afnsun

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Dodpfxjw Sxx Is Afnjun

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, warranty duration: 12 months, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term stable operation with high performance. Linear glass scales in the X, Y, and Z axes provide precise position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-frame design, combined with generously dimensioned cast components, guarantees mechanical stability and precision throughout the entire service life of the machine. Thanks to its high rigidity, the construction absorbs all machining forces, ensuring a consistently accurate spark gap between workpiece and electrode. Key features at a glance: - Manual EDM sparking via hand control with joystick function - High vibration damping thanks to stable cast-iron construction - Maximum material removal rate and accuracy with all material pairings - Low-wear final dimension tuning Duedpfxjyh Ngxj Afnon - Fully encapsulated integrated measuring systems - Fully integrated work area lighting - Automatic central lubrication Specifications: Height: approx. 2660 mm Width: approx. 2780 mm Depth: approx. 3050 mm Weight (without fluids): approx. 3900 kg Table (L x W): 1000 x 600 mm Dielectric above table: 450 mm Dielectric filter: 4 cartridge filters Workpiece weight: max. 1000 kg Travel X-Y: 650 x 450 mm Travel Z: 450 mm Resolution X-Y-Z: 0.001 mm Electrode weight: max. 50 kg Dielectric requirement: 1200 l Required cooling capacity: 4.5 kW Air flow rate: 10 l/min Required air pressure: min. 6 bar Electrode changer: 6-position

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, warranty duration: 12 months, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable precise position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-frame design, combined with generously dimensioned cast components, guarantees mechanical stability and precision throughout the machine’s entire service life. Its high level of robustness absorbs all machining forces, ensuring a consistently accurate spark gap between workpiece and electrode. Key features at a glance: - Manual eroding with jog function via hand control and joystick functionality - High vibration damping due to sturdy cast construction Dodpfjyh Nf Uex Afneun - Maximum removal rates and accuracy for all material pairings - Low-wear final dimension tuning - Fully encapsulated, integrated measuring systems - Fully integrated work area lighting - Automatic centralized lubrication Technical data: - Height: approx. 2400 mm - Width: approx. 2410 mm - Depth: approx. 2270 mm - Weight without fluids: approx. 2800 kg - Table (L x W): 700 x 400 mm - Dielectric above table: 350 mm - Dielectric filters: 3 cartridge filters - Max. workpiece weight: 700 kg - Travel range X-Y: 400 x 300 mm - Travel range Z: 350 mm - Resolution X-Y-Z: 0.001 mm - Max. electrode weight: 50 kg - Dielectric capacity: 450 l - Required cooling capacity: 4.5 kW - Air flow rate: 10 l/min - Required air pressure: min. 6 bar - Electrode changer: 4-position

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, total height: 2,530 mm, total width: 1,213 mm, total length: 2,326 mm, table width: 500 mm, table length: 575 mm, warranty duration: 12 months, With the genius 700, a new dimension of die-sinking EDM begins for you. High rapid traverse speeds and reduced non-productive times ensure the genius 700 processes your jobs exceptionally quickly. The ratio of table size to travel distance is unique in its class, enabling you to make optimal use of the table surface. Within its category, the machine offers by far the greatest dielectric fluid height above the table. Adjusting the dielectric with the infinitely adjustable tank is quick and simple. The machine features high rigidity thanks to preloaded roller guides. The C-axis moment of inertia is comparatively high at 0.6 kg/m². In addition, it is equipped with a high-precision measuring system. Even demanding EDM processes can be handled on the genius 700 efficiently and with maximum precision. On-the-fly filter changes prevent downtime, and the centralized lubrication unit shortens maintenance times. The genius 700 can be connected from two sides, offering flexible positioning. The height-adjustable control panel is ergonomically designed and allows for seated operation. Travel X – Y: 400 x 350 mm Travel Z: 350 mm Table size (L x W): 575 x 500 mm Distance, table – quill or chuck max./min.: 550/200 mm Dielectric fluid above table: 420 mm Dimensions (W x D x H): 1213 x 2326 x 2530 mm Total weight (without fluids): 3200 kg Workpiece weight: 700 kg Electrode weight with rotary: 15 kg Electrode weight without rotary: 50 kg with manual securing Resolution X – Y – Z: 0.001 mm (optionally 0.0001 mm) Dsdpfx Asyh Nfbofnsun Resolution C: 0.001° Dielectric tank capacity: 330 liters Generator: IPMtec (integrated) Work current: 52 A total; optionally 100 A total (+ 48 A) Booster: 196 A total (+ 96 A) Extraction capacity: 200 m³/h (55 l/sec) Required cooling output: 2.5 kW Floor load: approx. 2.1 N/mm² Number of support feet: 3 Load per foot: 2 t Foot plate diameter: ø 110 mm Air flow rate: 10 l/min Required air pressure: min. 6 bar T-slots: Number / width / spacing: 4 slots / 10 mm / 3 x 100 mm Paper star filter: 1 piece Flushing unit: 1 pressure connection, 1 suction connection, 1 fine volumetric pressure connection Flushing flow regulator: infinitely adjustable Programming software: PROGmodEDM

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Djdpfxop R R Ide Afnoun

Condition: not inspected (used), Year of construction: 1988, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, travels 300X250X250MM Djdpeyhdgvefx Afneun magnetic chuck 300X150MM tooling

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Dodpfxjxyyrqe Afneun

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Parts shown by hand not come. Djdpfxevkuqte Afnsun

Condition: used, Year of construction: 1998, Spark erosion machine OPS INGERSOL Gantry 1000 multipulse, No. 571692, year of manufacture 1998, working area 1,200 x 1,000 x 700 mm, with various auxiliary units, cooling unit/pump replaced in 2025. Duodpfx Aeyhqntsfnsn

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control Hybrid construction Travel paths (X/Y/Z): 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives in X and Y axes Linear scales in X and Y axes Intelligent AT – automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler Djdpsxpfy Sefx Afnsun tä9226

Condition: used, Year of construction: 2000, Sinker EDM machine Manufacturer: Exeron Model: EDM 314 Year of manufacture: 2000 Retrofit in 2016 Travel X/Y/Z: 900 x 700 x 450 cm Work tank: 1,200 x 900 mm Dodpfoxl Ah Eox Afnjun Tank fill height: 500 mm Automatic chuck on quill H8.11.18 8-position pick-up sliding tool changer Remote control with electronic handwheel Integrated dielectric supply Full machine enclosure Contact protection Automatic back-flushable gap filter system Automatic electronically controlled cooling unit

Condition: used, MAHO INGERSOLL HANSEN HS 300 E die sinking EDM machine Dsdpeyghmdjfx Afnoun

Condition: new, The ZNC-EDM 250 is a cutting-edge die sinking EDM machine in the Die Sinker EDM category, which is part of the EDM Machines group. Designed for mold and tool making, this machine excels in replicating injection molds and matrices with exceptional precision and surface quality. Its user-friendly CNC control streamlines the selection of work parameters, while the robust frame, equipped with preloaded ball screws on all axes, ensures low maintenance and high accuracy. The advanced spindle design with a dedicated lubrication circuit minimizes friction, thereby optimizing performance. With a compact design, this machine allows for efficient small part machining and features a separate dielectric reservoir for sustainable operation. Diagnostic systems contribute to the user-oriented experience, making it easy to learn and operate. For high-powered material removal and finishing in one process, the finely-incremented work parameters fulfill diverse operational needs. Don't miss the chance to enhance your production with this reliable machine—order online today to experience the precision and efficiency that KNUTH offers in the Die Sinker EDM category. Djdpong Ai Ijfx Afneun

Condition: ready for operation (used), Year of construction: 2008, This GASPARINI Spark 20040 was manufactured in 2008. A robust plasma cutting machine, it features a substantial working area of 4000×2000 mm and can handle sheet metal up to 60 mm thick. With cutting speeds ranging from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it's designed for efficiency. Consider the opportunity to buy this GASPARINI Spark 20040 plasma cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Supply voltage: 220 v, 400 v, 440 v / frequency: 50-60 hz • Length x width (fully assembled): 4910 x 3150 mm/ machine height: 1581 mm / cutting surface height: 908 mm • Machine weight (without grid): 3300 kg / total machine weight: 3500 kg • Maximum sheet metal thickness: 60 mm / cutting speed: min: 0. 1 m/min, max: 30 m/min / max. Positioning speed (x-axis): 40 m/min / max. Acceleration (x-axis): 2 m/s² Dusdox U Ucispfx Afnjn • Maximum power consumption: 8 kw (control panel), 19. 5 kw (plasma generator), 8 kw (fume extraction system) • Coolant temperature: 10−40°c / minimum coolant flow: 6 l/min / coolant pressure: 3. 5−4. 5 bar • Output current: 20−130 a / maximum output power: 19. 5 kw • Room requirement: 1400×600×300 mm • Cross-section of supply lines: 4mm² / supply cable cross-section: 10 mm² / fuse: 32 a slow-blow Extra Information without suction

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Dsdox D Inbjpfx Afnjun Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm Duodex Hp Nhjpfx Afnen max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" *

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): Dodpfjwtzdwex Afnsun X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Dujdpfewzifxjx Afnon

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm Dujdpfx Afex Dit Senjn U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Djdpfx Aeygq D Eefnoun

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. Djdpfx Afswimu Honeun It is in very good condition.

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return Dodpfx Ajb A Rxcefnsun -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Condition: used, Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse Dusdpfx Afob A Sxijnen -Counter holder for the return is missing -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.3 kg

Condition: used, Year of construction: 1999, Serial number: M20 STAR-002157 Futura control type: AFV 1PM-004340 Workpiece dimensions (approx.): 630 x 400 x 165 mm Support surface: 400 x 300 mm Table to quill distance min./max.: 188/438 mm Dusdpjyfpbysfx Afnsn Workpiece weight: 200 kg Electrode weight: 25 kg Drive: Resolution: 0.001 mm Feed rate: 720 mm/min Precision: VDI3441 Z-axis position deviation Pa: 0.01/250 X,Y position deviation Pa: 0.01/300 C-axis: Max. electrode weight: 25 kg Max. operating current: 60 A Speed: 0 – 55 rpm Drive: DC servomotor Resolution: 0.001° Position deviation: 0.01° Electrode magazine: Number of electrodes: 4 on the right side Max. electrode dimensions: 70/80/165 mm Max. total electrode weight in magazine: 9 kg Compressed air: 7 bar With technical documentation With accessories