Used Spark Erosion Edm for sale (713)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Dwjdpfx Aaoy E Nykjrod COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, overall weight: 6,440 kg, controller manufacturer: SODICK, controller model: LP1, number of axes: 3, This 3s Sodick AG55L die-sinking edm machine was manufactured in 2008. With a magazine capacity of 32 positions and a maximum workpiece weight of 1000 kg, it offers robust capabilities for precision machining. The X travel reaches 550 mm and Y travel extends to 400 mm, making it suitable for various applications. Consider the opportunity to buy this Sodick AG55L die-sinking edm machine. Contact us for further details. Dwedpfx Aoyk Ddysared • Magazine capacity: 32 positions • Table dimensions: 750 × 550 mm • Internal tank dimensions: 1100 × 950 × 500 mm • Maximum workpiece weight: 1000 kg • Maximum electrode weight: 50 kg • There are 2 equal machines available

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Dwodpfx Asyz Rxaearod Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Mitsubishi BKO-R8612 power board for Mitsubishi SX10 wire EDM machine, used, normal signs of wear, 100% functional, delivery as per photos. Dodpfxsx Dw I Ro Aarowd

Year of construction: 2025, condition: used, Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 Dwedewl Agqspfx Aarsd

Year of construction: 2025, condition: used, HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400) Dwjdpfxewl Alao Aared

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height Dsdpfx Aajwiq Scsrjwd hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, This listing is for a Liebherr LCv 4010 Mediline Laboratory Fridge Freezer The unit is in full working condition and is ready for immediate release The Liebherr LCv 4010 MediLine is a combined laboratory refrigerator and freezer designed to provide reliable temperature management for laboratory samples. It features a net capacity of 240 liters for the refrigerator compartment and 105 liters for the freezer compartment. The refrigerator operates within a temperature range of +3°C to +16°C, while the freezer maintains temperatures between -9°C and -30°C. The unit measures 2003 mm in height, 601 mm in width, and 618 mm in depth. The Liebherr range offers constant operation with excellent temperature stability. Built with innovative premium quality and an outstanding design, these units are engineered for low energy consumption, ensuring efficient laboratory function. Liebherr refrigerators are equipped with an advanced controller featuring inbuilt audible and visual alarms as standard. ATEX spark-free models are also available for the safe storage of samples and flammables. Features: ✔ Upright Fridge / Freezer Combi Model Dsdpfjxv D E Hex Aarewd ✔ Digital Temperature Display ✔ Forced Air Cooling for the refrigerator ✔ Efficient Refrigeration System ✔ Temperature Alarm ✔ Temperature stability and consistency (EN 60068-3) ✔ Environmentally Friendly Refrigerants ✔ Defrost: Refrigerator – Automatic ✔ Defrost: Freezer – Manual ✔ 2-Year Warranty This model is equipped with an advanced electronic control system, ensuring precise temperature regulation. It also includes audible and visual alarms to monitor temperature deviations, enhancing sample safety.

Condition: used, mileage: 73,000 km, power: 309 kW (420.12 HP), first registration: 03/2004, fuel type: gasoline, next inspection (TÜV): 07/2027, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, immobilizer system, Due to the high number of non-serious inquiries, emails will not be answered WhatsApp Dwsdpfx Aaoxv Nmverod Electronic issue (according to the workshop) Engine is not running on all cylinders Spark plugs and all ignition coils have been replaced. "SUBJECT TO ERRORS, TYPOGRAPHICAL MISTAKES, AND PRIOR SALE"

Condition: used, This listing is for the Liebherr LKUexv 1610 Mediline Refriderator P48-082 The unit is in full working condition and is ready for immediate release. This is a lab-grade refrigerator designed for high safety applications. Specifically, it’s ATEX 95 / ATEX-certified, meaning the internal design is spark-free and safe for storing flammable or explosive materials. The interior containers are explosion-proof in line with EU Directive 2014/34/EU. Temperature Range Dwjdpsxwc Hxofx Aarsd The fridge is adjustable between +3 °C and +16 °C, which makes it suitable for a wide variety of lab-stored materials. It uses a digital temperature display (visible from outside) to monitor internal temperature precisely. Size & Capacity External (footprint) dimensions: 820 mm height × 601 mm width × 618 mm depth. Total gross internal volume: 141 liters, with a net usable volume of 130 liters. Inside it has 3 adjustable shelves (per some spec sheets) for flexible storage. Energy, Cooling, & Refrigerant Energy consumption: about 0.863 kWh per 24h, or ~315 kWh/year. Forced-air (fan) cooling system, which helps maintain a stable internal temperature. Uses R600a (isobutane) as the refrigerant, which is a more environmentally friendly choice

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu Dodpfsxwmikex Aarswd # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: used, Hello, we are offering ten used Erowa precision holders 25 (ER-010607) including clamping pins, which have been disassembled, cleaned and also functionally tested by us. The holders have the usual signs of use but are technically in very good condition. Price per holder with clamping pin plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Dwjdpjq Turijfx Aarjd

Condition: new, Year of construction: 2026, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 4,800 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material and pipes. Wattsan 1530 Rotatory can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It also features a protective cabin. The standard equipment set includes a 6-meter-long pipe-cutting module. We may increase the module's size to 12 meters based on your specifications. The cabin protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan 1530 Rotatory Cabin characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Dwjdpfx Ajrzacbjared Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, mileage: 156,000 km, power: 155 kW (210.74 HP), first registration: 03/2022, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, loading space length: 6,070 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, parking heater, We are delighted that our offer has sparked your interest, and we assure you that you will be able to purchase a good and reasonably priced vehicle with a traceable service history from us! MB ATEGO 821 L with JUNGE box body Double horizontal rear cargo securing system LBW MBB PALFINGER 1,000 KG Auxiliary heater Roof spoiler Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and the manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASING or FINANCING offer. SERVICE TÜV/HU inspection / UVV LBW / LGS inspection / Tachograph inspection / Installation and service of OBU device by our BRANDED WORKSHOP before delivery. TOLL / ROAD FEES Toll can be booked on-site. Dwodpfx Ajwz A Uyjarjd ARRIVAL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. Dwedpfxjw Imp He Aared The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, maximum load weight: 13,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2016, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, We are delighted that our offer has sparked your interest and assure you that you will be able to purchase a high-quality and competitively priced vehicle with a traceable service history from our company! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your vehicle registration as well as export documents / EUR 1 certificate and manufacturer’s declaration for export. FINANCING Upon request, we are happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV main inspection / Accident Prevention Regulation (UVV) for tail lifts / LGS inspection / tachograph calibration / installation of OBU devices and service by our authorized workshop on site. TOLL / ROAD FEES Toll registration can be arranged on site. Dsdpfswyh Ezex Aarjwd TRAVEL / DISTANCES Wittlich railway station 500 m Frankfurt Airport 150 km Frankfurt-Hahn Airport 40 km Luxembourg Airport 75 km Sale subject to our General Terms and Conditions. All information provided online is a non-binding description and does not constitute guaranteed properties. The seller accepts no liability for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr

Year of construction: 1988, condition: used, Manufacturer: ONA Electro-Erosion, S.A. (Spain) Model: ONA-COMPACT 30 Year: 1988 Manufacturing Number: 5026/5912 Registration Number: 5026/8812 Type: Electrical Discharge Machine (EDM) - Die sinking Voltage: 220 V Current: 5.6 A Djdpfx Aswf E Ausarswd Pulse Power: 2 x 0.75 HP Apparent Power: 2.13 KVA Frequency: 50/60 Hz Estimated Table Travel: 300 x 200 mm Dielectric Tank Capacity: 100-150 L Approximate Weight: 1000-1200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 19 kg, cutting height (max.): 305 mm, warranty duration: 24 months, input voltage: 230 V, torque: 5 Nm, rotational speed (min.): 1,420 rpm, rotational speed (max.): 1,420 rpm, fuel type: electric, input frequency: 50 Hz, input current: 5 A, cable length: 4,000 mm, protection type (IP code): IP55, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, control type: manual, actuation type: manual, mobility: mobile, Equipment: CE marking, documentation/manual, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. Dodpfxjv Tcuxo Aarjwd DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: used, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, Designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm Dwedev R Ttajpfx Aarjd 3.Screw conveyor Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Condition: used, maximum load weight: 6,000 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 05/2014, loading space length: 7,200 mm, loading space width: 2,475 mm, loading space height: 2,360 mm, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good and competitively priced vehicle with a verifiable service history from our company! Tyres: 285 / 70 R 19.5 / approx. 70% tread remaining GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We organise your registration and export documentation / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we are happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift safety check / LGS inspection / tachograph inspection / installation of OBU device and service provided by our authorised workshop on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRANSPORT / DISTANCES Djdpfx Aoxl Nnroarewd Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our General Terms and Conditions. The information provided online is a non-binding description and does not constitute guaranteed properties. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Dodpfsxmhyijx Aarowd Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card Djdpfx Asx D Ryyoarswd • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Dedpfx Aaszrt Ipsrswd Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, overall weight: 3,600 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details. Dwodpfxezpa Abj Aarsd - Voltage: 3 x 400 V- Frequency: 50 Hz- Power: 9 kVA- Rated Current: 15.2 A- Additional Equipment: ICS Cool Energy i-Chiller external cooling unit mounted on wooden pallet- Additional Equipment: Standalone operator console terminal with screen, keyboard, and mouse

Condition: good (used), Year of construction: 2001, Startloch-Bohrmaschine Machine type: CASTEK HK-24 Year: 2001 SPECIFICATIONS Table size: 450 x 260 mm Dedpfjzkbtdjx Aarjwd X-Axis: 400 mm Y-Axis: 250 mm Drill diameter: 0.3–3.0 mm Max. Werkstückabmessungen: 810 x 510 x 240 mm Erodierhub: 370 mm Dielektrikum: 20 ltr. Power consumption: 4,5 KW Req. space (LxBxH): 1.400 x 1.400 x 2.400 m Machine weight: 1.000 kg