Used Stama Mc 320 for sale (30)

Year of construction: 1990, condition: used, table mounting size: 700 x 1200 mm movements x/y/z: 600/300/350 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 150/540 mm Kododa S Nvjpfx Abgjlr spindle turning speed range: 45 - 6000 rpm number of tool positions: 12 pieces carriages: 5000 - 20000 mm/min rapid move: 5000 - 20000 m/min spindle drive: 5,5 kW electrical connection: 380 V, 12 kVA kW space needed: 2350 x 2100 x 2500 mm weight: 3800 kg

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m Kledpfxet Hwy Eo Abger

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Kjdpjyw I Htsfx Abgjlr Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Note: Clara extraction unit is not included in the scope of delivery.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: P014TM481, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, total height: 2,200 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 410 mm, table length: 850 mm, overall weight: 2,000 kg, number of slots in tool magazine: 14, STAMA FANUC MC 014 CNC Vertical Machining Center - Operating voltage: 400 V Frequency: 50 Hz Rated current: 17 A - Table with three T-slots The machine is equipped with a 14-position tool turret Ksdpfxjy Dcp Nj Abgolr Note: The machine vice shown in the photos is not included in the scope of delivery! Note: The item must be collected between July 7 and July 9, 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm Klodpfx Aex U E Szjbgjr ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 5301168, travel distance X-axis: 3,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller model: SIEMENS SINUMERIK 840 C, number of slots in tool magazine: 42, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to arrange timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 3000 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Tool holder: SK 40 MACHINE DETAILS Control unit: SIEMENS SINUMERIK 840 C Operating voltage: 400 V Frequency: 50 Hz Klsdpfx Absyk Eckoger Rated current: 60 A Dimensions & Weight L x W x H: 8000 x 3500 x 3300 mm Machine weight: 15 t EQUIPMENT Chip conveyor Coolant system Sale does not include the clamping devices shown on the fixture surface in the photos! The machine can be transported on a truck with up to 3000 mm width. External reference: 4

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 6,200 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, tool weight: 5,000 g, number of axes: 4, This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 60 m/min • Feed rate: 1–10,000 mm/min • Acceleration: X/Y 5 m/s², Z 12 m/s² • Spindle: up to 300 Nm • Tool magazine: 48 tools; max tool Ø 88 mm; max tool length 300 mm; tool change approx. 2.4 s • Rotary table: diameter 180 mm (NC 4th axis) • Coolant system: tank 900 L; filtration 50 µm; pressure up to 25 bar • Hydraulics: 250 bar • Compressed air supply: 6 bar • Connected load: 28 kVA • Power supply: 3 × 400 V / 50 Hz Additional equipment • Rear chip conveyor • NC rotary table (4th axis), Ø 180 mm Kedpfx Absymduwogjlr Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: FANUC SERIES 18i-MB 5, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified dates, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 400 mm Travel Z-axis: 360 mm Table dimensions: 1,500 x 470 mm Overhang: 350 mm Tool holder: SK 40 Spindle speed: 36 to 12,000 rpm Spindle bearing diameter: 65 mm Max. tool diameter: 125 mm Max. tool length: 250 mm Feed rate X/Y/Z-axis: 1 - 10,000 mm/min Rapid traverse X/Y/Z-axis: 45 m/min MACHINE DETAILS Control: FANUC SERIES 18i-MB 5 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 45 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,700 x 3,300 mm Kedpsym Nqkofx Abgjlr Weight: 6,000 kg EQUIPMENT 4th axis 42-position tool changer Chip conveyor Coolant system Note: The clamping devices shown in the photos are not included. External reference: Elos – Lot 1

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 18i-MB5 Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 21 kW Tool taper HSK 63 Movement X-Axis Movement 1000 mm Z-Axis Movement 360 mm Y-Axis Movement 400 mm Ksdpsx D E Rmjfx Abgelr This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for tact us for more information. Application Types Milling

Condition: used, Year of construction: 1999, Technical details: x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N Kljdpeu Id Rbefx Abgor tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: used, Year of construction: 2013, functionality: fully functional, Operating hours: Machine runtime 33,520 h, Axes in motion 22,595 h List of clamping devices: - Main spindle Hainbuch SK80 Axzug - Hainbuch SK80 Axfix with various smooth and serrated collets Equipment: - 6-sided turning and milling center - Main spindle with swiveling rotary table - Counter spindle with swiveling rotary table and tailstock function - HSK63 spindle 10,000 rpm - 120 magazine positions - IRCO ILS MUK short bar loader - Hinged belt conveyor - High-pressure coolant system (with cooler) Sale only within the EU. Kjdpfoxlcbrex Abgslr

Condition: ready for operation (used), Year of construction: 1994, A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible. Kledpfxoxl Upuj Abgsr

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Kjdpfet E Tp Tex Abgslr

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB Klsdpfxel Eykgs Abger TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Frequency: 50 Hz Rated current: 87 A Kledjwyli Ropfx Abger Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KMM5352002, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 42, Robot loading unit is untested. TECHNICAL DETAILS X-axis: 800 mm Y-axis: 500 mm Z-axis: 510 mm Control: Siemens 840D Spindle and Drive Spindle speed: 36 - 10,000 rpm Spindle torque: max. 102 Nm Tool clamping: max. 12,000 N Tool holder: SK40 Number of tool positions: 42 Kjdpfx Abewlphnjgslr Feeds Feed rate x/y/z-axis: 1 - 10,000 mm/min Rapid traverse x/y/z-axis: 40 m/min Cutting capacity Milling capacity: max. 400 mm Drilling diameter: max. 50 mm Thread diameter: max. M30 Motors Main spindle motor 1 + 2: Make Kessler Power: 21 kW Speed: 15,000 rpm Servo motor x/y-axis: Siemens Torque: 14.0 Nm Speed: 3,000 rpm Servo motor z-axis: Siemens Torque: 17.6 Nm Speed: 3,000 rpm MACHINE DETAILS Voltage: 400 V / 50 Hz Total power requirement: 70 kW EQUIPMENT - Coolant system with paper belt conveyor - Chip conveyor: Flender MC535/x=800 - Hydraulic unit: HAWE - Promo loading system - untested

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m Ksdpfx Ajt Hwtfjbgslr

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm Kjdpjt Hwx Isfx Abgslr total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m Kledpfx Abjt Hwyregsr

Condition: used, Year of construction: 1987, x-travel 500 mm Kodpjt Hw H Ejfx Abgelr y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1983, An old Stama machining center is available. Tool positions: 10, travel path X/Y/Z: 500mm/380mm/400mm, table dimensions X/Y: 700mm/380mm, tool holder: SK30, speed: 7500rpm, drilling capacity in steel: 30mm, machine dimensions X/Y/Z: approx. 2350mm/2550mm/2750mm, weight: approx. 2500kg, control: Fanuc 6MB. An on-site inspection is possible. Klsdpfx Abjy D Tr Usger

Condition: ready for operation (used), Year of construction: 1998, operating hours: 15,968 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller model: FANUC 16iM-16i, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 300 mm Max. spindle speed: 8,000 rpm Table surface dimensions: 650 x 380 mm Number of tool magazine slots: 14 Tool holder: ISO/BT 30 Rapid traverse: 48 m/min MACHINE DETAILS Control model: FANUC 16iM-16i Power-on hours: 94,768 h Cutting hours: 15,968 h Operating hours: 5,146 h Spindle power: 5.5 kW EQUIPMENT Chip container Ksdpoyvf Hgofx Abgjlr Coolant tank with pump Integrated liquid lubrication system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KMM 334-2052, Used CNC Vertical Machining Centres – 3-axis CNC (X/Y/Z) X travel: approx. 800 mm Ksdpsyklx Sefx Abgolr Y travel: approx. 400 mm Z travel: approx. 350 mm Control: Siemens 840D Tool magazine: approx. 42 positions (depending on equipment) Spindle taper: HSK 63 Max. spindle speed: ~10,500 rpm Spindle drive power: approx. 18.5 kW Weight: approx. 7,500 – 8,800 kg Dimensions: ~3.5 × 3.5 × 3 m (L×W×H)

Condition: ready for operation (used), Year of construction: 2008, This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Additional information • 40-tool magazine • NC swivel table (4th axis) • Chip conveyor • Belt filter system • Internal coolant supply via spindle • High pressure capability • Renishaw probe • Extraction system Kedpfsx S Skxjx Abgjlr

Condition: used, Year of construction: 1997, functionality: fully functional, S/N: KMM3251165 Year of manufacture: 1997 X=500 Y=300 Z=350 Kjdpfx Absx Ni Snjgjlr Number of tools: 36 Spindle taper: SK40