Used Stama Mc 530 S for sale (32)

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 5301168, travel distance X-axis: 3,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller model: SIEMENS SINUMERIK 840 C, number of slots in tool magazine: 42, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to arrange timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 3000 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Tool holder: SK 40 MACHINE DETAILS Control unit: SIEMENS SINUMERIK 840 C Operating voltage: 400 V Frequency: 50 Hz Rated current: 60 A Dimensions & Weight L x W x H: 8000 x 3500 x 3300 mm Machine weight: 15 t EQUIPMENT Chip conveyor Codpfxsyk Eckj Ab Usra Coolant system Sale does not include the clamping devices shown on the fixture surface in the photos! The machine can be transported on a truck with up to 3000 mm width. External reference: 4

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm Crsdpfx Ajt Hwx Ieb Uea z-travel 350 mm total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min Crodpfsl Eykgox Ab Uja tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 1990, travel distance X-axis: 4,000 mm, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis STAMA MC 540S was manufactured in 1990. It features an integrated Fibro NC1.03 rotary axis, providing enhanced machining capabilities. The machine operates at a voltage of 380 V with a nominal current of 120 A. If you are looking to get high-quality machining capabilities, consider the STAMA MC 540S vertical machining center we have for sale. Contact us for further details. Crsdpfxsyxcgqo Ab Uoa • Operation voltage: 380 V / 3-phase / 50 Hz • Nominal current: 120 A Additional equipment • Rotary axis: Integrated Fibro NC1.03

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 3,000 mm, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis STAMA MC 540S was manufactured in 1995. It operates on a 3-phase AC electrical system with a supply voltage of 400 V and a nominal current of 70 A. Includes a rotary axis Fibro NC1.03. If you are looking to get high-quality machining capabilities, consider the STAMA MC 540S vertical machining centre we have for sale. Contact us for further details. Codpfoyxcgkox Ab Ujra • Supply voltage: 400 V • Electrical system: 3-phase AC • Frequency: 50 Hz • Nominal current: 70 A

Condition: used, Year of construction: 1991, x-travel 5000 mm y-travel 550 mm z-travel 550 mm Control Fanuc type Series 15 M table surface area 5000x520 mm Table load 4000 kg quill stroke 550 mm throat 580 mm distance between table/spindle 250-800 mm spindle taper ISO 40 spindle turning speed range 40-2000 U/min Tool changer 40 total power requirement 55 kW weight of the machine ca. 20 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Cjdpfx Aboyqum Ee Ujra More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m Cjdpfx Aet Hwtfob Uora

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t Credjt Hwyrjpfx Ab Uoa dimensions of the machine ca. m

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m Crjdpfx Absuqq Uqs Usa tool taper: HSK63 number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. rotary table diameter: 1340 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: FANUC SERIES 18i-MB 5, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified dates, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 400 mm Travel Z-axis: 360 mm Table dimensions: 1,500 x 470 mm Overhang: 350 mm Tool holder: SK 40 Spindle speed: 36 to 12,000 rpm Spindle bearing diameter: 65 mm Max. tool diameter: 125 mm Max. tool length: 250 mm Feed rate X/Y/Z-axis: 1 - 10,000 mm/min Rapid traverse X/Y/Z-axis: 45 m/min MACHINE DETAILS Control: FANUC SERIES 18i-MB 5 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 45 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,700 x 3,300 mm Weight: 6,000 kg EQUIPMENT Crsdpoym Nqkefx Ab Usa 4th axis 42-position tool changer Chip conveyor Coolant system Note: The clamping devices shown in the photos are not included. External reference: Elos – Lot 1

Year of construction: 1990, condition: used, table mounting size: 700 x 1200 mm movements x/y/z: 600/300/350 mm spindle taper: SK 40 ISA Crsdpfxjda S Nvj Ab Usa min./max. distance table/spindle: 150/540 mm spindle turning speed range: 45 - 6000 rpm number of tool positions: 12 pieces carriages: 5000 - 20000 mm/min rapid move: 5000 - 20000 m/min spindle drive: 5,5 kW electrical connection: 380 V, 12 kVA kW space needed: 2350 x 2100 x 2500 mm weight: 3800 kg

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm Crsdpfxex U E Sze Ab Usa RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM 326-2510, Used CNC Vertical Machining Center Make: Stama Model: MC 326 – Twin-Plus Year of manufacture: 2004 Machine type: Vertical Double-Spindle Machining Center Control system: Siemens Sinumerik 840D Powerline Travel paths (working area) X-axis: approx. 520 mm Y-axis: approx. 300 mm Csdpfxoyklycs Ab Ujra Z-axis: approx. 360 mm Spindle & Tooling Number of spindles: 2 (twin/double spindle) Spindle taper: HSK-A63 Max. spindle speed: approx. 10,000 – 12,000 rpm Spindle distance: approx. 200 mm Tool magazine: Chain magazine with 2 × 30 positions Table & Workpiece Worktable: Stationary, suitable for clamping devices or additional units Weight & Dimensions (approx.) Machine weight: approx. 6,500 kg Footprint: approx. 3.0 × 4.2 × 2.8 m (L×W×H, without auxiliary units)

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 6,200 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, tool weight: 5,000 g, number of axes: 4, This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 60 m/min • Feed rate: 1–10,000 mm/min • Acceleration: X/Y 5 m/s², Z 12 m/s² • Spindle: up to 300 Nm • Tool magazine: 48 tools; max tool Ø 88 mm; max tool length 300 mm; tool change approx. 2.4 s • Rotary table: diameter 180 mm (NC 4th axis) • Coolant system: tank 900 L; filtration 50 µm; pressure up to 25 bar • Hydraulics: 250 bar • Compressed air supply: 6 bar • Connected load: 28 kVA • Power supply: 3 × 400 V / 50 Hz Additional equipment • Rear chip conveyor Crodpfeymduwjx Ab Uoa • NC rotary table (4th axis), Ø 180 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Cjdpfsyw I Htex Ab Uera Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Note: Clara extraction unit is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 18i-MB5 Cjdpfox D E Rmsx Ab Ujra Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 21 kW Tool taper HSK 63 Movement X-Axis Movement 1000 mm Z-Axis Movement 360 mm Y-Axis Movement 400 mm This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for tact us for more information. Application Types Milling

Condition: used, Year of construction: 1999, Technical details: Credpfxeu Id Rbo Ab Uoa x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: used, Year of construction: 2013, functionality: fully functional, Operating hours: Machine runtime 33,520 h, Axes in motion 22,595 h Cjdpfexlcbrjx Ab Ujra List of clamping devices: - Main spindle Hainbuch SK80 Axzug - Hainbuch SK80 Axfix with various smooth and serrated collets Equipment: - 6-sided turning and milling center - Main spindle with swiveling rotary table - Counter spindle with swiveling rotary table and tailstock function - HSK63 spindle 10,000 rpm - 120 magazine positions - IRCO ILS MUK short bar loader - Hinged belt conveyor - High-pressure coolant system (with cooler) Sale only within the EU.

Condition: ready for operation (used), Year of construction: 1994, A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible. Crodpoxl Upuofx Ab Uja

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Crsdpot E Tp Tefx Ab Uea

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Frequency: 50 Hz Rated current: 87 A Crjdpfx Ajwyli Reb Usa Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KMM5352002, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 42, Robot loading unit is untested. TECHNICAL DETAILS X-axis: 800 mm Y-axis: 500 mm Z-axis: 510 mm Control: Siemens 840D Spindle and Drive Spindle speed: 36 - 10,000 rpm Spindle torque: max. 102 Nm Tool clamping: max. 12,000 N Tool holder: SK40 Number of tool positions: 42 Feeds Feed rate x/y/z-axis: 1 - 10,000 mm/min Rapid traverse x/y/z-axis: 40 m/min Cutting capacity Milling capacity: max. 400 mm Drilling diameter: max. 50 mm Thread diameter: max. M30 Motors Main spindle motor 1 + 2: Make Kessler Power: 21 kW Crodpfxowlphns Ab Uoa Speed: 15,000 rpm Servo motor x/y-axis: Siemens Torque: 14.0 Nm Speed: 3,000 rpm Servo motor z-axis: Siemens Torque: 17.6 Nm Speed: 3,000 rpm MACHINE DETAILS Voltage: 400 V / 50 Hz Total power requirement: 70 kW EQUIPMENT - Coolant system with paper belt conveyor - Chip conveyor: Flender MC535/x=800 - Hydraulic unit: HAWE - Promo loading system - untested

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm Cjdpfx Ast Hwy Ejb Uora total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m Codpfot Hw H Esx Ab Ujra

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM5311509, Equipment: chip conveyor, rotational speed infinitely variable, Continuous 5-axis machining center with Capto tool magazine and equipped with a pallet for automatic loading of workpieces. Crsdpfowztpnjx Ab Uja