STAMA MC 526

STAMA MC 526

Condition: ready for operation (used), Year of construction: 2007, operating hours: 82,265 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, table width: 600 mm, table length: 1,400 mm, table load: 1,500 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 42, tool weight: 5,000 g, number of axes: 3, This STAMA MC526 was manufactured in 2007. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Additional information • Feed Force X/Y-Axis: 4,000 N • Feed Force Z-Axis: 8,000 N • Rapid Traverse X/Y/Z: 60 m/min • Feed Rate X/Y/Z: 1 – 10,000 mm/min • Axis Dynamics: X = 5 m/s² • Axis Dynamics: Y = 8 m/s² • Axis Dynamics: Z = 12 m/s² • Distance Table to Spindle Nose: 350 – 710 mm • Tool Clamping Force: 7,000 N • Spindle Diameter: 65 mm • Constant Torque Range: Up to 3,000 rpm • Torque at 100% Duty Cycle: 30 Nm • Torque at 20% Duty Cycle: 59 Nm • Power Above 3,000 rpm at 100% Duty Cycle: 9.5 kW • Power Above 3,000 rpm at 20% Duty Cycle: 18.5 kW • Maximum Tool Diameter (All Positions Occupied): 88 mm • Maximum Tool Diameter (Adjacent Positions Free): 125 mm • Pull Stud Standard: DIN 69872-19 • Tool Change Time (Chip-to-Chip): Approx. 2.4 s • Tool Offset Functions: Length and Radius Compensation • Tool Data Input: Via Input Station or CNC Screen Menu • Positioning Resolution: 0.001 mm • Machine Prepared For: Fixed Table with T-Slots and Location Holes • Machine Prepared For: NC Rotary Table with Tailstock • Tool Holder Type: SK40 DIN 69871 A/B • Siemens 840D SolutionLine • Chip conveyor optional • Belt filter system • Internal coolant supply via spindle Ledjx S Skxspfx Ancoag • High pressure capability • Renishaw probe • Extraction system • Connection Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Nominal Current: 34 A • Additional Fuse: 3 x 50 A • Minimum Connection Cross Section: 25 mm² • CE Marking: Yes Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, Lasdpfx Aszh Nczoncog 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Lasdpfx Anoxg Nd Aecog Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Ljdpfot Rmdzsx Ancjag Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Laedpjpgmryofx Anceg Are you also looking for a crane system?

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. A second station with another identical tilting and rotating table is possible. Ledpfjizwv Nox Anceag

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame Lsdpfogin Ndox Ancoag - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Laodpfxjgbfaxs Ancog Max. Drilling Capacity (mm) Ø40 mm

Condition: good (used), Technical specifications: Lajdef N Hdxepfx Ancsg Drive motors / Motor Quantity: 4 units available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz / rpm 1461/228 kW 1.5 S1 Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Laedpfx Ansyxvwisceg Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.